New Electric Lock.
|
Accession number;01A0925729
|
| Title;New Electric Lock. |
| Author;
KAGOTANI OSAMU
(Nabuko Kenchikujigyobu Gijutsubu)
|
Journal Title;Nabco Engineering Reports
|
Journal Code:X0469A
|
ISSN:0917-2637
|
|
VOL.;NO.91;PAGE.31-33(2001)
|
| Figure&Table&Reference;FIG.5, TBL.1 |
| Pub. Country;Japan |
| Language;Japanese |
| Abstract;The locks are classified into the empty lock which has no locking mechanism and consists only of a provisional securing mechanism using a latch bolt and the deadlock which has a dead bolt. The titled lock is a deadlock type electric lock. High-speed operation is realized for the lock, and there is no problem, if it may be interlocked with an automatic door. Low noise is realized through the control of solenoid operating voltage. The electric lock has input/output signals for the functions of locking and unlocking, full closure of the door, and sustained unlocked condition, and re-actuation takes place in the absence of a feedback of locking and unlocking signal. This paper illustrates the fail safe type and fail secure type, and shows the specifications of the electric lock section and the controller section. Locking force and unlocking force of 4 N or more for the both and lock holding force of 1000 N or more are assured. This paper presents regarding the actuation time that a variable type is employed, whereby the locking time is 1.5 seconds/0.5 second and the unlocking time is 0.4 second/0.2 second. |
|
|
|
Related Articles;
|
|
