|
Accession number;05A0645828
|
| Title;Development of Suspension Parts with High Vacuum Die Casting Technique using Horizontal Clamping Vertical Squeeze Casting Machine |
| Author;
YAHATA SHIGEO
(Hiroshimaaruminiumukogyo Gijutsukaihatsubu)
TAJIRI MAKOTO
(Hiroshimaaruminiumukogyo Seisangijutsubu)
TABATA JUNJI
(Hiroshimaaruminiumukogyo Gijutsukaihatsubu)
|
Journal Title;Journal of Japan Foundry Engineering Society
|
Journal Code:G0096A
|
ISSN:1342-0429
|
|
VOL.77;NO.7;PAGE.471-477(2005)
|
| Figure&Table&Reference;FIG.15, TBL.1, REF.4 |
| Pub. Country;Japan |
| Language;Japanese |
| Abstract;We have developed a high vacuum die casting technique using horizontal clamping vertical squeeze casting machine and applied this technique to the mass production of a suspension parts for a sportscar. This technique principally consists of steadily evacuating air in the die cavity using a new shutoff valve and closely sealing the gaps of the die parting planes by a new sealing method. By this method, sufficiently high vacuum condition under 3 KPa was obtained in a cavity. Moreover, since the quality of molten aluminum remarkably affects the occurrence of cracks by severe plastic deformation during the clinching of the ball joint part for fixing parts, we developed a new system of pouring from bottom of the ladle to prevent air entrapment in the molten aluminum, etc. (author abst.) |
|
|
|
Related Articles;
|
