|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Abstracts. Meeting of JIM
138th
- Catalytic properties of Ni3Al powder for methane steam reforming: isothermal test
- Anisotropic deformation behavior of Ni/Ni3Al two-phase alloy
- Effects of ternary elements additions on thermoelectric properties of Ba-Ge type-III clathrate compounds
- Lotus-type porous nickel-free stainless steel with high temperature nitriding
- Microstructure and Strength of Extruded Mg-Zn-Ho alloys containing quasicrystal phase
- Role of Solute Atoms in the Microstructure Refinement of Mg Alloys during Extrusion Processes
- Evolution of Microstructure in SiC-AlN Ceramics by EELS Mapping
- Interfaces of icosahedral phase with .ALPHA.-Mg and pure Pb and Bi nanoparticles and its effect on properties
- Electrochemical-Alkali Treatment on Ti29Nb13Ta4.6Zr Alloy for Hydroxyapatite Growth
- Analysis of anelastic recovery behaviors of different magnesium alloys by acoustic emission
- A New Titanium Catalyst for NaAlH4 as a Hydrogen Storage Material
- PCI Measurement of TiCl3-doped LiNH2-LiH based on the samples obtained from optimized preparing method
- Mechanism of hydrogen sorption in Li-Mg-N-H system composed of Mg(NH2)2 and LiH II
- Study of Hydrogen Storage Haucke Compounds (I): Electronic Properties
- Study of Hydrogen Storage Haucke Compounds (II): Elastic Properties
- Neutron, Synchrotron X-ray Diffraction and Instrumented Indentation Studies of Deformation in Shape Memory Alloys
- Aging effect on electrostrain property in hybrid doped BaTiO3 ceramics
- Electric-field induced shape-memory-effect in (PbLa8)(Zr65Ti35)O3 relaxor ferroelectrics
- Shape memory behavior of Ti-Ta alloys
- Precipitation Kinetics in Ni-rich Ti-Zr-Ni Alloys
- Evidence for strain glass in Ti48.5Ni51.5 alloy by quasi-static strain measurement
- Evidence for Strain Glass in Ti50Ni50-aXa(X=Fe,Mn,Cr,Co,V)Ternary Systems
- Strain Glass in Ti50Pd50-aXa(X=Fe,Mn,Cr,Co,V) Ternary Systems
- Analysis of Point Defects Formation and Mobility during Heavy Ion Irradiation
- The Influences of Ir Particle Size on Formation of IrAl composite by SHS Process
- Progress in PM Foaming Technique: Application of Calcium Carbonate Foaming Agent for High Strength Al Matrix Alloy.
- Effect of ball-milling treatment on microstructure of in situ powder-in-tube MgB2 tape
- Pseudo-EQ Bond Coat for a 5'th' Generation Ni-Based Superalloy
- Diffusion and Oxidation of Pt Plated NiCrAl Alloys and TMS82+ Superalloy
- Protective Role of CuO layer Regarding Impurity Effect
- Transmission electron microscopy analysis of tin oxide on an Sn/FeNi42 solder material
- Effect of heat exposure on interfacial shear mechanical properties in EB-PVD TBCs by a pushout method
- The Industrial Ecology of Metals
- Formation of nanocrystalline PdO
- Microstructure, magnetic properties and spin polarization of Co2Cr1-xVxAl Heusler alloys
- Spin polarization measurement of Co2MnGe L21 and A2 ordered thin films
- Structural properties of epitaxial Fe/Co monoatomic layer growth on Au(001) electrode
- Thermal Conductivity Measurement of Tungsten Oxide Nanoscale Thin Films
- Magnetic Microstructure of L10(Fe0.55Pt0.45)78Zr2-4B18-20 Nanocrystalline Alloys Observed by Electron Holography
- Single Wall Carbon Nanotube-Based Electrochemical Capacitors For Space Exploration Applications
- Annealing effect on the structural perfection of MBE grown .BETA.-FeSi2 epitaxial film
- Effects of Fe deposition thickness on .BETA.-FeSi2/Si heterostructures
- Microstructure formation and phase identification from undercooled CoSi-CoSi2 eutectics solidified on an EML and ESL
- Microstructure and Mechanical properties of In-situ Formed Nb-based Composites
- A thermodynamic recalculation of the Ni-Al phase diagram by a CALPHAD approach
- Pt-based glassy alloys with prospective properties for nanoimprinting
- Corrosion behaviour of Ti-based bulk metallic glass
- Corrosion Behavior of Cu-Hf-Ti-Ta Bulk Glassy Alloys
- Crystallization Behavior and Thermal Stability of As-Cast Zr-Al-Ni-Cu-(Pd,Pt) Glassy Alloys Prepared under Various Pressures of Casting Chamber
- Glass/crystallization transformation curve of bulk Zr55Cu30Al10Ni5 metallic glass for viscous flow fabrication
- Supercooled liquid region in Al-based glassy alloys as a function of electronegativity difference among the alloying elements
- Thermal expansion and free volume changes in glassy alloys studied using reciprocal-space and real-space distribution functions
- Synthesis, structure and mechanical properties of of Cu-Zr-Ti bulk metallic glass matrix in situ composites
- Formation of glassy and icosahedral phases in the as-cast(Zr9Ni4)75(Al1-xTix)25 alloys
- Gd-Co-Al and Gd-Ni-Al bulk metallic glasses with high thermal stability and their mechanical and magnetic properties.
- Synthesis of Ti3SiC2 through pulse discharge sintering powder mixture containing coarse Ti
- Continuous DRX in 7475 Al Alloy during the Transient Hot Deformation
- First-principles study on electronic and optical properties of olivine structures of Si3N4 and Ge3N4
- In situ observation of a field-emitting TaSi2 nanowire by electron holography
- Atomic-Scale Structure of .ALPHA.-FeOOH containing Silicate Ions converted from Green Rust
- Dynamic Precipitation and Strengthening of .BETA. phase in a Fully Lamellar TiAl+W Alloy
- Microstructural evolution of a new Co-base superalloy strengthened by .GAMMA.' phase
- Mechanical response of Ir-Hf-Zr ternary alloys with a dual-phase fcc/L12 structure at high temperature
- Creep deformation of a 4'th' and 5'th' generation Ni-base single crystal superalloys
- Hot corrosion behavior of Pt-Ir modified aluminide coatings on nickel-base single crystal superalloy at 1173K
- Creep Behavior of Advanced Ni-Co-base Disk Alloy
- Microstructures and Mechanical properties of Advanced Disk Superalloys
- Temperature dependence of electron-beam-induced structural changes in SiC
- Epitaxially Grown Cobalt-Based Full-Heusler Alloy Thin Films for Spintronic Devices
- Transport of Spin Polarized Electrrons in a Semimetal
- InGaAs Based Semiconductor Heterostructures for Spintronics Devices
- Electrical spin injection and detection of ferromagnetic/nonmagnetic hybrid device
- Thermally Stable Solar-blind Diamond Ultraviolet Photodetector
- Formation Mechanism of Ge Self-Assembled Quantum Dots (SAQDs) on Si (001) with an Undulated Strain Field
- Current status and future prospect of Cu Interconnect in ULSIs
- Metal Gate Technology for Advanced CMOSFETs
- High-performance magnetic refrigerants based on itinerant-electron metamagnetic La(FexSi1-x)13 compounds for room temperature cooling systems
- Fabrication of FeCo based thin films for high frequency applications
- For Further Development of the NdFeB Magnets
- Development and Application of Nd-Fe-B Sintered Magnets
- Nanostructure and magnetization behavior for FePt thin films
- Effect of additives on L10ordering in FePt films
- Microstructure Control of High Nitrogen (.ALPHA.+.BETA.) Type Titanium Alloy Fabricated by Solution Nitriding
- The influence of drilling parameters and initial structure on the microstructure of drilled hole in carbon steels
- Strain gradient hardening in steels obtained by high pressure torsion
- Influences of ECAP and Aging on Microstructures and Mechanical Properties of Al-11mass%Ag Alloys
- Theoretical Study of Organic-Metal Interfaces
139th
- How to make an SEM imaging in the very low energy range
- Slow electrons in material science applications
- New Technologies to Characterize Nanostructured Bulk Materials
- A thermodynamic analysis of the Co-Al-W system
- Equilibrium and dynamic properties of dislocation dipoles
- Effect of steam-to-carbon ratio on the catalytic activity of Ni3Al for methane steam reforming
- The Effect of Calcium Carbonate Foaming Agent on Structure and Energy Management of High Strength Al-Zn-Mg Foam
- Tensil Behavior of Open Cell Stainless Steel Metallic Foams
- Electrochemical behavior of Lotus-type porous nickel-free stainless steel with high temperature nitriding
- Atomic Scale Segregration of Y in Alumina Grain Boundaries Using STEM
- Radiation-induced Microstructural Evolutions in Yttria-stabilized Zirconia Irradiated with Xe Ions
- Characterization of Mechanical Alloyed Fe-Ti-Y2O3 Powders with Heat Treatment
- Hydrogen permeation in Pd-25Ag alloy membrane: thickness effects
- Effect of H2S Impurity on Hydrogen Permeation of Pd60Cu40 Covered V-15Ni Composite Membrane
- Thermoelectric properties of combustion synthesized Sr1-xLaxTiO3(0.LEQ.x.LEQ.1)
- Interfacial chemistry in Alloy 718 after service
- Tensile Creep Behaviors of New Ni-Co-base Disk Alloys
- Cluster Variation Analysis of Partitioning Characteristics of Elements in Ni-base Superalloys
- Phase constituents in Ni-Al-Co-Ti quaternary alloys
- Interdiffusion of Co and Refractory Elements (Re,W,Ru) in Ni base Ternary Alloys
- Effect of microstructure of titanium sheet on photocatalytic performance of its oxide film
- An extended finite difference method for study of liquid phase sintering of tungsten heavy alloy in gravity and microgravity environments
- Modelling of magnetic field-enhanced crystallisation from an amorphous precursor
- An Etching Behavior to Expose Plastic Zone in Carbon Steels
- Microstructure Evolution and Texture Development of Magnesium Alloys AZ31 and AZ61 during Uniaxial Compression Deformation at High Temperatures
- Enhancement of Compressive Strength by Quasicrystal Phase in Mg-Zn-Ho Alloys
- Age hardening and microstructure of Mg-Zn-Cu alloys
- Recoverable domain switching under stress field in hybrid doped BaTiO3 ceramics
- Kinetics of Athermal Omega Phase Transformation in Cu-Zn System
- .BETA.-.ALPHA.'' Martensitic Transformation in Ti-Nb Shape Memory Alloys
- Effect of low temperature aging on the shape memory behavior of Ti-Ta and Ti-Ta-Al alloys
- Compression Behaviour of Isothermally Aged Ni-rich Ti-Zr-Ni
- Ultra-high damping in R-phase state of Ti-Ni-Fe alloy
- Defect effect on the transformation behavior of Ti50Ni50-xMnx alloys
- Long time relaxation in a frozen strain glass state
- Eutectic reaction in near-equi-atomic Ti-Ni alloys due to oxidation
- Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite measured by X-ray diffraction
- Synthesis of Ti3SiC2 through pulse discharge sintering TiH2/SiC/C powder mixture
- Preparation of Titania Films by Laser CVD in Nitrogen Atmosphere
- Unusual Local Residual Stress Distribution in TGO Layer of Heat-Exposed EB-PVD TBC System
- Effect of microstructure of HVOF-sprayed WC-Co coatings on their mechanical properties
- Local variation of critical current in tensile- and bending strained Bi2223 composite tape
- In situ non-destructive evaluation method for dielectric composites employing electromagnetic wave
- Microstructural Refinement and Improvement of Creep Resistance in TiAl Alloys
- Deformation behavior of high strength metastable hypereutectic Ti-Fe-Co alloys
- Effect of heating rate on the combustion synthesis of (Ir,Ni)Al intermetallics
- Migration and Formation Volumes of Thermal Vacancies in B2-FeAl
- 3-D in-situ visualization and image-based simulation of ductile fracture in an Al-Si alloy
- 3D characterization of fatigue crack propagation in a cast Al alloy using high resolution synchrotron microtomography
- MBE growth and characterization of Mn doped .BETA.-FeSi2 films
- First-principles study on effective doping in IVA group spinel nitrides
- Quantitative electron holographic analysis on a field-emitting TaSi2 nanowire
- Evaluation of charging effect on non-conductive materials by electron holography
- Atomic mobility for fcc phase of Co-(Cr, Fe, and Ni) binaries: a computational study
- Dielectric and Mechanical Relaxation in Cobalt Ferrites at Low Frequencies
- Low Temperature Synthesis of Oriented L10-FePtCu Nanoparticles with High-Areal Density
- Investigation of Co2FeSi full-Heusler alloy: structure, spin polarization and tunneling magnetoresistance
- New Ce-Cu-Al-Zn bulk metallic glasses
- Origin for the different as-cast structures of Zr65Al7.5Ni10Pd17.5 during mold-casting under various atmospheres
- Factors affecting the glass-forming ability of some Ni-based alloys
- Controlling shear bands by preparation and heat treatment of BMGs
- Ageing response in a new Zr-based bulk metallic glass with improved mechanical property
- Glass-forming Ability and Mechanical Properties of New Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses
- The dependence of the liquid states on the mechanical properties of Ni50Pd30P20 metallic glasses
- Formation and mechanical properties of an in-situ bulk Zr-Al-Ni-Cu-Nb quasicrystal-glass composite
- Fusion Welding of Cu-Based Bulk Metallic Glasses by GTAW & Nd: YAG Laser Welding Method
- Electron-Beam Welding of Zr Based Bulk Metallic Glass to Crystalline Ni Metal
- Glass-Forming Ability and Thermal Stability of New (TiZrNb)50(CuAgPd)50-xSix Bulk Glassy Alloy for Biomedical Application
- Influence of Alloying Elements Ni and Nb on the Corrosion Resistance of Cu-Based Bulk Glassy Alloys
- Glass-Forming Ability, Corrosion Resistance and Mechanical Properties of {[(Fe0.6Co0.4)0.75B0.2Si0.05]96Nb4}100-xCrx Bulk Glassy Alloys
- Fabrication and corrosion property of new Ti-based bulk metallic glasses without Ni
- SPring-8.MU.-XRF analysis of strontium segregation in modified hypoeutectic Al-Si alloy
- Fluidity of lead-free solder Sn-0.7mass%Cu containing trace Ni additions
- Metastable phase formation by containerless solidification of LuFeO3melts in controlled oxygen atmosphere
- Cast hypoeutectic Mg-Ni alloys for hydrogen absorption
- Effect of Bi diffusion on Carrier Concentration in Bi-Sb-Te Alloys
- Long-term native oxidation of Cu thin films at room temperature
- First-principles Study of Short Alkane/Metal Interfaces
- Deformation behavior and AE source in pure magnesium
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
