Science Links Japan | ISIJ Int (Iron Steel Inst Jpn)

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

ISIJ Int (Iron Steel Inst Jpn)

Occurrence and Composition of Some Mineral Phases in the Tuyere Coke
Deoxidation Equilibrium of Aluminum and Silicon in the Liquid Iron-Nickel Alloys
The Effect of Na2O and Al2O3 on Dephosphorization of Molten Steel by High Basicity MgO Saturated CaO-FeOx-SiO2 Slag
Kinetics of the Non-Isothermal Reduction of Nb2O5 with Aluminium
Thermodynamics of Titanium and Nitrogen in Fe-Si Melt
Vortexing Flow Patterns in a Water Model of Slab Continuous Casting Mold
A New Equiaxed Solidification Predictor from a Model of Columnar Growth
Mathematical Modeling of Draft Schedule for In-line Rolling of Ultra Thin Strip in the Combined Single-belt Casting/Hot Rolling Process
Examination of Oxide Scales of Hot Rolled Steel Products
CO2 Laser Welding Characteristics of 800 MPa Class TRIP Steel
Influence of Welding Parameters and Shielding Gas Composition on GTA Weld Shape
Analysis of the Initial Stage of Localized Corrosion on Zn and Zn Alloy Coated Steels by Photon Rupture Method
Inhibition of Conversion Process from Fe(OH)3 to .BETA.-FeOOH and .ALPHA.-Fe2O3 by the Addition of Silicate Ions
Modelling of Microstructure Evolution during Hot Rolling of a 780 MPa High Strength Steel
Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon Steels
Effect of Nitriding on Grain Oriented Silicon Steel Bearing Aluminum
Dependence of Solvus Temperature of the Laves Phase on (Mo+W+Re) Contents in High Cr Ferritic Steels
Phase Equilibrium between Austenite and MX Carbonitride in a 9Cr-1Mo-V-Nb Steel
Difference in the Role of Non-quench Aging on Mechanical Properties between Acicular Ferrite and Ferrite-Pearlite Pipeline Steels
Certainty Factor Estimation Using Petri Neural Net for HSLA Steel
Fatigue Crack Initiation in an Interstitial Free Steel
The Effects of the Oxygen-enriched Surface Layer on Mechanical Properties of .ALPHA.+.BETA. Type Titanium Alloys
Numerical Simulation of Peritectic Reaction in Fe-C Alloy Using a Multi-phase-field Model
2
Iron Ore Reduction in a Laboratory-scale Fluidized Bed Reactor-Effect of Pre-reduction on Final Reduction Degree
The Effect of B2O3 on Dephosphorization of Molten Steel by FeOx-CaO-MgOsatd.-SiO2 Slags at 1873 K
Theoretical Analysis on the Injection of H2, CO, CH4 Rich Gases into the Blast Furnace
The Wear of Tundish Stopper Refractories by Inclusion Slags
Numerical Simulation of Grain Structure Evolution in Solidification of an Al-5.0wt%Cu Alloy under Electromagnetic Stirring and Its Experimental Verification
Solidification Parameters Dependent on Interfacial Heat Transfer Coefficient between Aluminum Casting and Copper Mold
Dimensional Analysis of Hot Strip Rolling for On-line Prediction of Thermo-mechanical Behavior of Roll-Strip System
Mathematical Modelling of Jet Finishing Process for Hot-dip Zinc Coatings on Steel Strip
Numerical Simulation of Gas-Jet Wiping in Steel Strip Galvanizing Process
Modelling Upper and Lower Bainite Trasformation in Steels
Neural Network Model for Isothermal Pearlite Transformation. Part I: Interlamellar Spacing
Neural Network Model for Isothermal Pearlite Transformation. Part II: Growth Rate
Deformation and Recrystallization of Tensile-deformed or Rolled Fe-3%Si Alloy Single Crystals
Image Quality Analysis: A New Method of Characterizing Microstructures
A New Evaluation Method of Hydrogen Embrittlement Fracture for High Strength Steel by Local Approach
Impact Toughness and Tensile Properties Improvement through Microstructure Control in Hot Forged Nb-V Microalloyed Steel
Tensile Fracture Behaviors in Double-notched Thin Plates of a Ductile Steel
Inadvertent Melting of Radioactive Sources in BOF or EAF: Distribution of Nuclides, Monitoring, Prevention
Hot Deformation of Austenitic Stainless Steel Type 316 up to Strain Rates of 100 s-1
Effect of Absorbed Nitrogen on the Microstructure and Core Loss Property of Non-oriented Electrical Steel
3
Mathematical Model of Over-micron and Nano-scale Powders Accumulation in a Coke Fixed-Bed Filter
Density of Liquid IF Steel Containing Ti
Improvement in Blast Furnace Reaction Efficiency through the Use of Highly Reactive Calcium Rich Coke
Comparison between Standard and Renormalization Group k-.EPSILON. Models in Numerical Simulation of Swirling Flow Tundish
Mathematical Model for Growth and Removal of Inclusion in a Multi-tuyere Ladle during Gas-stirring
Effects of Dynamic Recrystallization on .GAMMA. Grain Refinement and Improvement of Micro Segregation of As Cast Austenite in 9% Ni Steel
Application of Sequential Quadratic Programming Method to Temperature Distribution Control in Reactor Furnace
Analysis of Water Cooling Mechanism by Impinging Jet for Hot Rolled Wire Rod
Improvement in Surface Brightness and Prediction of Spangle Formation Time in a Continuous Galvanising Line through Heat Balance
Accelerated Corrosion Behavior due to Alternating Dry-Wet Conditions for LP Steam Turbine Materials of Fossil Power Plants
Ferrite/Pearlite Band Prevention in Dual Phase and TRIP Steels: Model Development
Role of Pre-deformation in Age Hardening of a Niobium-microalloyed Steel
Ultra-fine (.ALPHA.+.THETA.) Duplex Structure Formed by Cold Rolling and Annealing of Pearlite
Effect of Microstructure on Strain-hardening Behaviour of a Ti-IF Steel Grade
Effect of Zirconium and Lanthanides on the Recovery in 2618 Base Aluminum Alloys
DRI Apparent Density and Its Strength
Effect of a Current Pulse on the Thermal Fatigue Behavior of Cast Hot Work Die Steel
4
Summarized Achievements of the Porous Meso-mosaic Texture Sinter Research Project
Marra Mamba Ore, Its Mineralogical Properties and Evaluation for Utilization
A Perspective of Goethitic Ore Sintering Fundamentals
Fundamental Factors Determining Laboratory Sintering Results
Fundamental Insights into the Sintering Behaviour of Goethitic Ore Blends
Sintering Fundamentals of Magnetite Alone and Blended with Hematite and Hematite/Goethite Ores
Effect of Adding Moisture and Wettability on Granulation of Iron Ore
Influence of the Nuclei Particle Properties on Granulability of Marra Mamba Iron Ore by High Speed Agitating Mixer
The Effect of Marra Mamba Ore Addition on the Granulation Characteristics of Pisolite Based and Hematite Based Sinter Blends
Numerical Simulation Model for Granulation Kinetics of Iron Ores
Effect of Al2O3 and MgO Additions on Liquidus for the CaO-SiO2-FeOx System at 1573 K
Experimental Evaluation of Chemical Composition and Viscosity of Melts during Iron Ore Sintering
Development of a 3-D Sinter Process Mathematical Simulation Model
Properties of Core Ore in Quasi-particle Required for Large Amounts Usage of Limonitic Ores in Iron Ore Sintering Process
Design of Bed Structure Aiming the Control of Void Structure Formed in the Sinter Cake
Sintering Behavior of Raw Material Bed Placing Large Particles
Effect of Raw Material Composition on the Sintering Properties
Crystal Structure of the SFCAM Phase Ca2(Ca,Fe,Mg,Al)6(Fe,Al,Si)6O20
Effects of Slag Content and Composition on the Reducibility of Iron Oxide Including CaO-SiO2-FetO Slag
Influence of Artificially Induced Porosity on Strength and Reduction Behavior of Hematite Compacts
Measuring Strains for Hematite Phase in Sinter by Electron Backscattering Diffraction Method
Meso-porous Modeling for Theoretical Analysis of Sinter Ores by the Phase-field, Unit-cell Method
Improvement of Sinter Softening Property and Reducibility by Controlling Chemical Compositions
Research in the Reduction of Iron Ore Agglomerates Including Coal and C-containing Dust
Observation of Behavior of Dioxins and Some Relating Elements in Iron Ore Sintering Bed by Quenching Pot Test
5
A Review of Slag Splashing
Observations of the Reduction of FeO from Slag by Graphite, Coke and Coal Char
Kinetics of Reduction of FeO from Slag by Graphite and Coal Chars
A Model for Estimation of Viscosity of Molten Silicate Slag
The Effect of Grain Boundaries on the Surface Rearrangement during Wuestite Reduction within its Range of Existence
A Thermodynamic Study of Silicon Containing Gas around a Blast Furnace Raceway
A Three-dimensional Mathematical Modelling of Drainage Behavior in Blast Furnace Hearth
Modeling of Mixing in Ladles Fitted with Dual Plugs
Improvement of Hot Ductility in the Nb-microalloyed Steel by High Temperature Deformation
Design of Heat-treated Alloy Steels Using Intelligent Multi-objective Optimisation
Enhanced Plasticity of a Tool Steel Near .ALPHA.-.GAMMA. Transformation
Local Austenite Grain Size Distribution in Hot Bar Rolling of AISI 4135 Steel
Analysis of the Effect of Mn on the Recrystallization Kinetics of High Nb Steel: An Example of Physically-based Alloy Design
Process Monitoring Method with Window Technique for Clinch Joining
Cr2O3 Film Formed by Surface Oxidation of Stainless Steel Irradiated by a Nd-YAG Pulsed Laser
Grain Structure of Fe-0.3mass%C-9mass%Ni Steel Processed through .ALPHA..RAR..GAMMA..RAR..ALPHA.' Transformation Caused by Spontaneous Reverse Transformation
Texture Development during Grain Growth in Nonoriented Electrical Steels
Fabrication of Ultrafine Grained Ferrite/Martensite Dual Phase Steel by Severe Plastic Deformation
Three-dimensional Observation of Ferrite Plate in Low Carbon Steel Weld
A Comparative Study on the .THETA. Projection and the .OMEGA. Method
6
Iron and Steel Production and Technology in Japan during 2004
Phase Equilibria in the Cristobalite, Tridymite and Pyroxene Primary Phase Fields in the MgO-"FeO"-SiO2 System in Equilibrium with Metallic Iron
Effect of Al2O3 and Cr2O3 on Liquidus Temperatures in the Cristobalite and Tridymite Primary Phase Fields of the MgO-"FeO"-SiO2 System in Equilibrium with Metallic Iron
Copper Enrichment Behaviours of Copper-containing SteelsIn Simulated Thin-slab Casting Processes
Development of Coating Granulation Process at Commercial Sintering Plant for Improving Productivity and Reducibility
Effect of Iron Oxide Feeding Rate and Hot Metal Temperature on Dephosphorization Rate in Torpedo Car
Physical Modeling of Slag Foaming for Various Operating Conditions and Slag Compositions
Roll Speed and Roll Gap Control with Neural Network Compensation
Effect of TMCP Parameters on the Microstructure and Properties of an Nb-Ti Microalloyed Steel
Regression Method of Determining Generalized Description of Flow Curve of Steel under Dynamic Recrystallization
TEM Characterization of the Recrystallization Behaviour of Warm Rolled Low Carbon Steels Containing Chromium during the Early Stages of Annealing
Prediction of Acicular Ferrite from Flux Ingredients in Submerged Arc Weld Metal of C-Mn Steel
Hot Corrosion Behaviour of Plasma Sprayed Coatings on a Ni-based Superalloy in Na2SO4-60%V2O5 Environment
Correlation between the Microstructure of Galvannealed Coatings and the Defoliation during Press Forming
Thermodynamic Modeling in Reduced Activation Steels
Low Temperature Tempering of a Medium Carbon Steel in High Magnetic Field
Texture Effect on Magnetic Properties by Alloying Specific Elements in Non-grain Oriented Silicon Steels
Ridging-free Ferritic Stainless Steel Produced through Recrystallization of Lath Martensite
Evaluation of Plastic Deformation Limit by Circumferentially Notched Tension Test
Hydrothermal Synthesis of Zeolite A Using Blast Furnace Slag
7
Magnetohydrodynamic Simulation of DC Arc Plasma under AC Magnetic Field
Numerical Simulation of a Falling Droplet of Liquid Metal into a Liquid Layer in the Presence of a Uniform Vertical Magnetic Field
Refining Mechanism of Solidified Structure of Alloy by Electromagnetic Refining Process
Refining of Si by the Solidification of Si-Al Melt with Electromagnetic Force
Effect of Rotating Magnetic Field on Two-phase Flow in RH Vacuum Degassing Vessel
Free Surface Behavior of a Liquid Metal under the Imposition of a High Frequency Magnetic Field
Inclusions Behavior Analysis during Levitation Melting of Steel in Cold Crucible for Application to Cleanliness Assessment
Investigation of the Melt Flow on Solidified Structure by a Levitation Technique Using Alternative and Static Magnetic Fields
The Crystal Orientation Taking Account of Gravity Force under High Magnetic Field
Phenomenological Discussion of Fe and Co Film Electrodeposited in a Magnetic Field
Management of Water Transport in the Cathode of Proton Exchange Membrane Fuel Cells Using Permanent Magnet Particles Deposited in the Cathode-side Catalyst Layer
Effect of Oxygen to Silicon Ratio on the Viscosity of Metallurgical Slags
Phase Equilibria in High MgO Ferro-manganese and Silico-manganese Smelting Slags
Structure Analysis of Coke, Wood Charcoal and Bamboo Charcoal by Raman Spectroscopy and Their Reaction Rate with CO2
Surface Active Effect of Na2O on the Rate of CO2 Dissociation on the Surface of Molten FeOx-Na2O and FeOx-SiO2-Na2O Systems
Degradation Behaviour of a High CSR Coke in an Experimental Blast Furnace: Effect of Carbon Structure and Alkali Reactions
Development of Fluoride-Free Fluxes for Billet Casting
Use of Flow Barriers to Eliminate Vortex in the Flow Field Generated in a Continuous Galvanizing Bath
Correlation of High-temperature Steam Oxidation with Hydrogen Dissolution in Pure Iron and Ternary High-chromium Ferritic Steel
The Washing Effect in Electromagnetic Rotational Stirrers for Continuous Casting
8
The Preferable Growth Direction of Iron Nuclei on Wuestite Surface during Reduction
Heating Efficiency of Twin Torch Plasma Arc
Model Study of the Rupture Phenomena of a Metal Droplet Growing on a Slag-Metal Interface
Phase Equilibria in the Olivine Primary Phase Field in the MgO-"FeO"-SiO2 System in Equilibrium with Metallic Iron
Effects of Al2O3 on Phase Equilibria in the Olivine Primary Phase Field of the MgO-"FeO"-SiO2-Al2O3 System in Equilibrium with Metallic Iron
Thermodynamics of TiN Formation in Fe-Cr Melts
Segregation Behavior for Fine Particles of Sintered Ores and Coke Supplied at the Top of a Two Dimensional Cold Model of Blast Furnace
Heat Transfer Analysis and Estimation of Refractory Wear in an Iron Blast Furnace Hearth Using Finite Element Method
Modeling the Effects of a Swirling Flow on Temperature Stratification of Liquid Steel and Flotation of Inclusions in a Tundish
Mathematical Model for Removal of Inclusion in Molten Steel by Injecting Gas at Ladle Shroud
Promotion of Uniform Dispersion of Fine Particles into a Mechanically Agitated Steel Bath
The Effects of Thermosolutal Convection on Macrosegregation during Alloy Solidification
Cold Model Study of the Effects of Density Difference and Blockage Factor on Mold Powder Entrainment
Robust Molten Steel Level Control in a Strip-casting Process
Mathematical Model for the Thin Strip Cold Rolling and Temper Rolling Process with the Influence Function Method
Characterization of Internal Voids and Cracks in Cold Heading of Dual Phase Steel
The Coupled Model of a Microstructure Evolution and a Flow Stress Based on the Dislocation Theory
Microstructure and Formability of Aluminum Bearing TRIP-Aided Steels with Annealed Martensite Matrix
Mechanical Properties and Microstructures of Zr-Microalloyed Cast Steel
Effect of Microstructural Features on Ductility of Drawn Pearlitic Carbon Steels
Model Study on a Swirl Motion of a Bubbling Jet Generated in a Wastewater Bath Covered with Top Oil Layer
Variant Selection in Mechanically-induced Martensitic Transformation of Metastable Austenitic Steel
9
Contributions by Japanese Researchers at Carnegie Mellon University
Empirical Expression of Phosphorus Solubility in Molten Fe1-yCry Given as Functions of Temperature and Phosphorus Activity
Microwave Heating Behavior of Blast Furnace Slag Bearing High Titanium
Precipitation and Growth of V-concentrating Phase in Synthetic V-bearing Steelmaking Slag
Solubility of Oxygen in Iron-Silicon Melts in Equilibrium with Silica at 1873 K
Characterisation of Manganese Furnace Dust and Zinc Balance in Production of Manganese Alloys
Kinetic Analysis of the Iron Oxide Reduction Using Hydrogen-Carbon Monoxide Mixtures as Reducing Agent
Interfacial Phenomena Occurring during Iron/Char Interactions in a Blast Furnace
Time-dependent Fractal Characteristics on Time Series of Silicon Content in Hot Metal of Blast Furnace
Three-dimensional Simulation of Flow and Combustion for Pulverised Coal Injection
Kinetics of Oxygen Refining Process for Ferromanganese Alloys
Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature
Application of Bismuth for Solidification Structure Refinement and Properties Enhancement in As-cast High-speed Steels
Influence of the Size and Volume Fraction of TiN Particles on Hot Strength and Dynamic Recrystallisation in Structural Steels
Analysis of the Effect of Tension at the Entry of Cold Rolling Mill on the Stability of Strip Tracking
Abrasive Wear Behaviour of Fe-30Cr-3.6C Overlays Deposited on Mild Steel
A Zinc and Manganese Phosphate Coating on Automobile Iron Castings
Effects of S Content and Surface Finish on Pitting Corrosion of Austenitic Stainless Steels Containing Mo in Chloride and Bromide Solutions
Numerical Simulation of Copper Precipitation during Aging in Deformed Fe-Cu Alloys
Modeling the Effect of Copper on Hardness of Microalloyed Dual Phase Steel through Neural Network and Neuro-fuzzy Systems
Comparison of Cold Formability of Cold Drawn Non-heat-treated Steels Having Similar Strength
Metallurgical Investigations on Two Sword Blades of 7th and 3rd Century B.C. Found in Central Italy
Effect of Finish Hot Rolling Temperature on the Surface Quality of Galvannealed IF-HS Steel Sheets
10
Reduction of CO2 Emissions from Integrated Steel Works and Its Subjects for a Future Study
Subjects for Achievement of Blast Furnace Operation with Low Reducing Agent Rate
Two Dimensional Cold Model Study on Unstable Solid Descending Motion and Control in Blast Furnace Operation with Low Reducing Agent Rate
Development of New Simulation Method for Flow Behavior of Granular Materials in a Blast Furnace Using Cellular Automaton
Predicition of Stable and Unstable Flows in Blast Furnace Raceway Using Numerical Simulation Methods for Gas and Particles
Numerical Simulation of Blast Furnace Raceway Depth and Height, and Effect of Wall Cohesive Matter on Gas and Coke Particle Flows
Stress Field and Solid Flow Analysis of Coke Packed Bed in Blast Furnace Based on DEM
Analyses on Blast Furnace Raceway Formation by Micro Wave Reflection Gunned through Tuyere
Stabilization of Tapping Hole Length by Controlling Blast Furnace Raceway Depth
Analyses on Dynamic Solid Flow in Blast Furnace Lower Part by Deadman Shape and Raceway Depth Measurement
Development of a Visual Information Technique of Nonstationary Fluctuations in a Blast Furnace Process
Effects of Packed Structure and Liquid Properties on Liquid Flow Behavior in Lower Part of Blast Furnace
Characteristics of Liquid Hold-ups in a Soaked and Unsoaked Fixed Bed
Influence of Channeling Factor on Liquid Hold-ups in an Initially Unsoaked Bed
Analysis of Reaction Rate between Solid Carbon and Molten Iron by Mathematical Models
Numerical Analysis on Behavior of Unburned Char and Fine Coke in Blast Furnace
Effect of Various In-furnace Conditions on Blast Furnace Hearth Drainage
Effect of FeO in Dripping Slag on Drainage Ability of Slag
Effects of Operation Condition and Casting Strategy on Drainage Efficiency of the Blast Furnace Hearth
11
Current Trends in Cross Wedge Rolling for Part Forming
Wetting and Interfacial Reaction Investigations of Coke/Slag Systems and Associated Liquid Permeability of Blast Furnaces
Supersaturation of Carbon in Austenite during Carburization by CO Gas
Experimental Study of Phase Equilibria in the MnO-"TiO2"-"Ti2O3" System
Experimental Study of Phase Equilibria in the MnO-SiO2-"TiO2"-"Ti2O3" System
Thermal Implications of Phase Transformations during Induration of Iron Ore Pellets Produced from Hematite
Use of Slag Containing Water as a Lubricant in High Straining Rolling for Ultrafine-grained Steels
Complex Deoxidation Equilibria of Molten Iron by Aluminum and Calcium
Laboratory Scale Investigation to Improve the Productivity of Stamp Charge Coke Oven through Optimisation of Bulk Density of Coal Cake
Continuous Off-gas Measurement and Energy Balance in Electric Arc Steelmaking
Solid Inclusion Transfer at a Steel-Slag Interface with Focus on Tundish Conditions
Mechanism of Resulfurization in Magnesium Desulfurization Process of Molten Iron
Numerical Investigation of Fluid Flow Phenomenon in a Curved Shape Tundish of Billet Caster
Experimental and Numerical Analysis of the Free Surface in a Water Model of a Slab Continuous Casting Mold
Laboratory Evaluation of New Type of Backup Roll for Strip Shape Control
Mathematical Modelling of Roll Cooling and Roll Surface Stress
Microstructural and Micro-textural Evolution during Single Pass High Z-large Strain Deformation of a 0.15C Steel
An Unusual Structure of an As-cast 30 % Cr Alloy White Iron
Hot Deformation and Recrystallization of 3% Silicon: Steel Part 1: Microstructure, Flow Stress and Recrystallization Characteristics
Hot Deformation and Recrystallization of 3% Silicon: Steel Part 2: Effect of Microstructural Variables on Static Recrystallization
Hot Deformation and Recrystallization of 3 % Silicon Steel: Part 3: Effect of Hot Deformation Variables on Static Recrystallization
Hot Deformation and Recrystallization of 3% Silicon Steel: Part 4: Effect of Recovery and Partial Recrystallization between Passes on Subsequent Recrystallization Behaviour
Coherent-to-Incoherent Transition of Intergranular bcc-precipitates by Pre-/Post-deformations in a Ni-43Cr Alloy
Determination of Driving and Pinning Forces for Static Recrystallization during Hot Rolling of a Niobium Microalloyed Steel
Influence of Mn Content on the Microstructure and Mechanical Properties of Ultrafine Grained C-Mn Steels
Characterization of the Relation among the Mechanical Behavior and the Texture Features in High Martensitic Dual Phase Steels
Ultra-high-strength Bainitic Steels
Effect of Microstructure on Static and Dynamic Mechanical Property of a Dual Phase Steel Studied by Shear Punch Testing
Effects of Ni and Heat Treatment on Long-term Creep Strength of Precipitation Strengthened 15Cr Ferritic Heat Resistant Steels
Comments on "Evaluation of Thermodynamic Activity of Metallic Oxide in a Ternary Slag from the Sulphide Capacity of the Slag"
Modeling Stress-Strain Curves of Hot Deformed Ti-Nb Interstitial Free Austenite
Occurrence Condition of a Swirling Bubbling Jet in a Water Bath Covered with an Oil Layer
12
High Power Ultrasonics in Pyrometallurgy: Current Status and Recent Development
Deoxidation Equilibrium of Chromium in Liquid Iron-Nickel Alloys
Lattice Constant of Iron and Austenite Including Its Supersaturation Phase of Carbon
Prevention of Resulfurization in Desulfurization Process with Magnesium Vapor Produced in Situ by Aluminothermic Reduction of Magnesium Oxide
Chlorination and Evaporation Behaviors of PbO-PbCl2 System in Ar-Cl2-O2 Atmosphere
Vaporization Behavior of Zinc from the FeO-CaO-SiO2-Al2O3 Slag System
Effect of Coke Micro-Textural and Coal Petrographic Properties on Coke Strength Characteristics
Discrete Particle Simulation of Solid Flow in a Model Blast Furnace
A Mathematical Model to Study Liquid Inclusion Behavior at the Steel-Slag Interface
Numerical Analysis on Si Deoxidation of Molten Fe, Ni, Fe-Ni, Fe-Cr, Fe-Cr-Ni, Ni-Cu and Ni-Co Alloys by Quadratic Formalism
Dissolution Kinetics of Alumina into Mold Fluxes for Continuous Steel Casting
The Observation of Mold Flux Crystallization on Radiative Heat Transfer
Corrosion Behavior in Graphite Refractories Impregnated with ZrO2 and CeO2 Carrying Solutions
Influence of TiN Particle Precipitation State on Static Recrystallisation in Structural Steels
Effects of Carbon Contents in Steels on Alloy Layer Growth during Hot-dip Aluminum Coating
Mapping the Hot Deformation Microstructure of Ni-30Fe Alloy
Microstructural Changes and Crack Initiation with White Etching Area Formation under Rolling/Sliding Contact in Bearing Steel
An Analysis of the Transition between Strain Dependent and Independent Softening in Austenite
Estimation of the System Free Energy of Martensite Phase in an Fe-Cr-C Ternary Alloy
High Temperature Creep Flow and Damage Properties of the Weakest Area of 9Cr1Mo-NbV Martensitic Steel Weldments
Study of the Inelastic Response of TRIP Steels after Plastic Deformation
Contribution of Microstructural Factors to Hardness Change during Creep Exposure in Mod.9Cr-1Mo Steel
Impact of Ladle Design on Bath Mixing
Prediction of Silicon Content in Blast Furnace Hot Metal Using Partial Least Squares (PLS)