|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
J Biomed Mater Res
59
- Failure characteristics of multiple-component fibrin-based adhesives.
- Effect of water vapor treatment on apatite formation on precalcified titanium and bond strength of coatings to substrates.
- Preparation of TiO2 layers on cp-Ti and Ti6Al4V by thermal an anodic oxidation and by sol-gel coating techniques and their characterization.
- Implanted octacalcium phosphate is more resorbable than .BETA.-tricalcium phosphate and hydroxyapatite.
- Biological characterization of a novel biodegradable antimicrobial polymer synthesized with fluoroquinolones.
- Quantifying adhesive penetration in adhesive/dentin interface using confocal Raman microspectroscopy.
- Adhesion/decalcification mechanisms of acid interactions with human hard tissues.
- Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels.
- Assessment of the genotoxicity of resin and zinc-oxide eugenol-based root canal sealers using an in vitro mammalian test system.
- Bone morphogenetic protein 3b expressing reindeer antler.
- Protein adsorption and human osteoblast-like cell attachment and growth on alkylthiol on gold self-assembled monolayers.
- Structural alteration of erythrocyte cell membrane in presence of artificial prostheses: A radiowave dielectric spectroscopy study.
- Novel hydroxyapatite ceramics with an interconnective porous structure exhibit superior osteoconduction in vivo.
- Biocompatible microcapsules with enhanced mechanical strength.
- Perfusion culture of hepatocytes within galactose-derivatized biodegradable poly(lactide-co-glycolide) scaffolds prepared by gas foaming of effervescent salts.
- Adhesion behavior of monocytes, macrophages and foreign body giant cells on poly (N-isopropylacrylamide) temperature-responsive surfaces.
- In situ gelling and mucoadhesive polymer vehicles for controlled intranasal delivery of plasmid DNA.
- Transforming growth factor .BETA. released from natural coral implant enhances bone growth at calvarium of mature rat.
- A biologically active VEGF construct in vitro: Implications for bioengineering-improved prosthetic vascular grafts.
- Metabolic heat production as a measure of macrophage response to particles from orthopedic implant materials.
- Mutagenicity evaluation of forty-one metal salts by the umu test.
- Bone response to radio frequency sputtered calcium phosphate implants and titanium implants in vivo.
- Static coefficient of friction between Ti-6Al-4V and PMMA for cemented hip and knee implants.
2
- Effects of low-intensity pulsed ultrasound on proliferation and chondroitin sulfate synthesis of cultured chondrocytes embedded in Atelocollagen gel.
- In vitro stability of a novel compliant poly(carbonate-urea)urethane to oxidative and hydrolytic stress.
- Surface modification of extrasynovial tendon by chemically modified hyaluronic acid coating.
- PMMA-based bioactive cement: Effect of glass bead filler content and histological change with time.
- In situ hydrogelation of photocurable gelatin and drug release.
- Sintered dicalcium pyrophosphate increases bone mass in ovariectomized rats.
- Interface-mediated synthesis of hydroxyapatite.
- Reactivity of plasma-sprayed wollastonite coating in simulated body fluid.
- Transforming growth factor-.BETA.1 incorporation in a calcium phosphate bone cement: Material properties and release characteristics.
- Biodegradable poly(ethylene oxide)/poly(.EPSILON.-caprolactone) multiblock copolymers.
- Experimental investigation of Poisson's ratio as a damage parameter for bone fatigue.
- Effect of mechanical perturbation on the release of PGE2 by macrophages in vitro.
- Nucleation and growth of hydroxyapatite on an amino organosilane overlayer.
- Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. I. Structure and microstructure.
- Hydroxylapatite with substituted magnesium, zinc, cadmium, and yttrium. II. Mechanisms of osteoblast adhesion.
- Biodegradable dextran-polylactide hydrogel networks: Their swelling, morphology and the controlled release of indomethacin.
- Albumin adsorption onto pyrolytic carbon: A molecular mechanics approach.
- Bioactive sol-gel foams for tissue repair.
- Drug-releasing scaffolds fabricated from drug-loaded microspheres.
- A comparative study of primary and immortalized cell adhesion characteristics to modified polymer surfaces: Toward the goal of effective re-epithelialization.
- Angiogenesis and neovascularization associated with extracellular matrix-modified porous implants.
- On carbide dissolution in an as-cast ASTM F-75 alloy.
- Visible-light-induced surface graft polymerization via camphorquinone impregnation technique.
- Hydroxyapatite coating on titanium by thermal substrate method in aqueous solution.
- Comments on acoustic emission visualization of bone cement fatigue locations.
3
- Effect of experimental parameters on the in vitro release kinetics of transforming growth factor .BETA.1 from coral particles.
- Effect of initiation chemistry on the fracture toughness, fatigue strength, and residual monomer content of a novel high-viscosity, two-solution acrylic bone cement.
- Adsorption and release properties of growth factors from biodegradable implants.
- Effect of poly(ethylene glycol) molecular weight on tensile and swelling properties of oligo(poly(ethylene glycol)fumarate) hydrogels for cartilage tissue engineering.
- Control of wound infections using a bilayer chitosan wound dressing with sustainable antibiotic delivery.
- Biocompatibility of lipid-protein-sugar particles containing bupivacaine in the epineurium.
- Induction of c-fos and c-jun protooncogenes expression by formaldehyde-releasing and epoxy resin-based root-canal sealers in human osteoblastic cells.
- Localization of metallic ions within gingival fibroblast subcellular fractions.
- Formation of apatite layers on modified canasite glass-ceramics in simulated body fluid.
- Synthesis, degradation, and in vitro cell responses of sodium phosphate glasses for craniofacial bone repair.
- Effects on articular cartilage of subchondral replacement with polymethylmethacrylate and calcium phosphate cement.
- Novel current-conducting composite substrates for exposing osteoblasts to alternating current stimulation.
- The effect of particle wear debris on NF.KAPPA.B activation and pro-inflammatory cytokine release in differentiated THP-1 cells.
- Proliferation and differentiation of rat calvarial osteoblasts on type I collagen-coated titanium alloy.
- Hypothermia-induced platelet aggregation in human blood in an in vitro model: The dominant role of blood-material interactions.
- Biomimetic calcium phosphate coatings on Polyactive 1000/70/30.
- Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model.
- In catheter infections by Staphylococcus epidermidis the intercellular adhesion (ica) locus is a molecular marker of the virulent slime-producing strains.
- Fabrication of poly(.ALPHA.-hydroxy acid) foam scaffolds using multiple solvent systems.
- Retention and activity of BMP-2 in hyaluronic acid-based scaffolds in vitro.
- Evaluation of the biocompatibility of a chitosan scaffold in mice.
- Probe of specific interaction between a simplified synthetic glycopolymer and erythrocytes as mediated by a glucose transporter(GLUT) on a cell membrane.
4
- Silica- and zirconia-hybridized amorphous calcium phosphate: Effect on transformation to hydroxyapatite.
- Prosthetic metals have a variable necrotic threshold in human fibroblasts: An in vitro study.
- Biocompatibility studies on biodegradable polyester-based composites of human osteoblasts: A preliminary screening.
- Sterically blocking adhesion of cells to biological surfaces with a surface-active copolymer containing poly(ethylene glycol) and phenylboronic acid.
- Low pressure plasma treatment of poly(3-hydroxybutyrate): Toward tailored polymer surfaces for tissue engineering scaffolds.
- Cells, rather than extracellular matrix, nucleate apatite in glutaraldehyde-treated vascular tissue.
- The relationship between stress, porosity, and nonlinear damage accumulation in acrylic bone cement.
- Electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy analysis of titanium surfaces cultured with osteoblast-like cells derived from human mandibular bone.
- Effect of adsorbed fibronectin concentration on cell adhesion and deformation under shear on hydrophobic surfaces.
- Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method.
- A comparative evaluation of the tissue responses associated with polymeric implants in the rat and mouse.
- Matrix engineering for osteogenic differentiation of rabbit periosteal cells using .ALPHA.-tricalcium phosphate particles in a three-dimensional fibrin culture.
- Novel synthesis and characterization of an AB-type carbonate-substituted hydroxyapatite.
- Bonelike apatite growth on hydroxyapatite-gelatin sponges from simulated body fluid.
- Solution deposition of hydroxyapatite on titanium pretreated with a sodium ion implantation.
1
60
- Hydroxyapatite deposition by electrophoresis on titanium sheets with different surface finishing.
- Alteration of leukocyte motility on plasma-conditioned prosthetic biomaterial, ePTFE, via a flow-responsive cell adhesion molecule, CD43.
- Co-extrusion of biocompatible polymers for scaffolds with co-continuous morphology.
- Effects of DMAEMA and 4-methoxyphenol on gingival fibroblast growth, metabolism, and response to interleukin-1.
- Control of in vivo microvessel ingrowth by modulation of biomaterial local architecture and chemistry.
- MMA/MPEOMA/VSA copolymer as a novel blood-compatible material: Effect of PEO and negatively charged side chains on protein adsorption and platelet adhesion.
- Biocompatibility of fluorinated polyimide.
- Recombinant human bone morphogenetic protein-2 promotes osteogenesis within atelopeptide type I collagen solution by combination with rat cultured marrow cells.
- Effect of calcium phosphate coating crystallinity and implant surface roughness on differentiation of rat bone marrow cells.
- Interaction of bioactive glasses with peritoneal macrophages and monocytes in vitro.
- Cell adhesion peptides alter smooth muscle cell adhesion, proliferation, migration, and matrix protein synthesis on modified surfaces and in polymer scaffolds.
- Heparin and non-heparin-like dextrans differentially modulate endothelial cell proliferation: In vitro evaluation with soluble and crosslinked polysaccharide matrices.
- Influence of bioresorbable, unsintered hydroxyapatite/poly-L-lactide composite films on spinal cord, nerve roots, and epidural space.
- Electrically communicating three-dimensional cardiac tissue mimic fabricated by layered cultured cardiomyocyte sheets.
- Transverse process fusion with bovine anorganic bone.
- Engineering protein and cell adhesivity using PEO-terminated triblock polymers.
- Fluorinated surface-modifying macromolecules: modulating adhesive protein and platelet interactions on a polyether-urethane.
- Shear stress and material surface effects on adherent human monocyte apoptosis.
- Hydroxyapatite ceramic bodies with tailored mechanical properties for different applications.
- Shear force modulates osteoblast response to surface roughness.
- Comparative study of the formation of hydroxyapatite in simulated body fluid under static and flowing systems.
- Anticoagulant activity of sulfonated polyrotaxanes as blood-compatible materials.
- Compliant design of artificial graft: Compliance determination by new digital X-ray imaging system-based method.
- Smooth muscle cell adhesion on crosslinked hyaluronan gels.
- Prophylactic treatment of gram-positive and gram-negative abdominal implant infections using locally delivered polyclonal antibodies.
2
- Alginate type and RGD density control myoblast phenotype.
- Resorbability and solubility of zinc-containing tricalcium phosphate.
- Fabrication of porous hydroxyapatite bodies by a new direct consolidation method: Starch consolidation.
- Bone formation in transforming growth factor .BETA.-1-coated porous poly(propylene fumarate)scaffolds.
- Chemistry and biocompatibility of alginate-PLL capsules for immunoprotection of mammalian cells.
- In vitro and in vivo dissolution behavior of a dysprosium lithium borate glass designed for the radiation synovectomy treatment of rheumatoid arthritis.
- Effects of enamel matrix derivative to titanium implantation in rat femurs.
- Apatite-forming ability of a zirconia/alumina nano-composite induced by chemical treatment.
- Hemocompatibility of materials used in microelectromechanical systems: Platelet adhesion and morphology in vitro.
- Effects of pH on human bone marrow stromal cells in vitro: Implications for tissue engineering of bone.
- Analysis of acid-treated dentins mear debris and smear layers using confocal Raman microspectroscopy.
- Adhesion between poly(ethylene-co-vinyl alcohol)(EVA) and titanium.
- Effect of sodium hypochlorite on dentin bonding with a polyalkenoic acid-containing adhesive system.
- Biomechanical comparison of the sandblasted and acid-etched and the machined and acid-etched titanium surface for dental implants.
- Surface characteristics and structure of anodic oxide films containing Ca and P on a titanium implant material.
3
- Osseointegration of hydroxyapatite-coated and noncoated Ti6A14V implants in the presence of local infection: A comparative histomorphometrical study in rabbits.
- Platelet adhesion to polystyrene-based surfaces preadsorbed with plasmas selectively depleted in fibrinogen, fibronectin, vitronectin, or von Willebrand's factor.
- In vitro behavior of albumin-loaded carbonate hydroxyapatite gel.
- Effect of elastin on the calcification rate of collagen-elastin matrix systems.
- Heparin-like polymers modulate proinflammatory cytokine production by lipopolysaccharide-stimulated human monocytes.
- Synergistic effects of glucose and ultraviolet irradiation on the physical properties of collagen.
- TGF-.BETA., BMPs, and their signal transducing mediators, Smads, in rat fracture healing.
- Surface modification of poly(D,L-lactic acid) with chitosan and its effects on the culture of osteoblasts in vitro.
- Cationic lipid-mediated transfection of bovine aortic endothelial cells inhibits their attachment.
- Polythylene wear characteristics in vivo and in a knee simulator.
- Concentration- and composition-dependent effects of metal ions on human MG-63 osteoblasts.
- Use of Ti-coated replicas to investigate the effects on fibroblast shape of surfaces with varying roughness and constant chemical composition.
- Transforming growth factor-.BETA. 1,2, and 3 can inhibit epithelial tissue outgrowth on smooth and microgrooved substrates.
- Enzymatic responses of human deciduous pulpal fibroblasts to dental restorative materials.
- Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys.
- Novel osteoblast-adhesive peptides for dental/orthopedic biometerials.
- In vitro generation of differentiated cardiac myofibers on micropatterned laminin surfaces.
- Uptake of poly(D,L-lactic-co-glycolic acid) microspheres by antigen-presenting cells in vivo.
- Protein and surface effects on monocyte and macrophage adhesion, maturation, and survival.
- Heparin-like polymer improved healing of gastric and colic ulceration.
- Biocompatibility evaluation of ePTFE membrane modified with PEG in atmospheric pressure glow discharge.
4
- Effect of grooved titanium substratum on human osteblastic cell growth.
- Evaluation of nanostructured carbonated hydroxyapatite coatings formed by a hybrid process of plasma spraying and hydrothermal synthesis.
- Morphologic and functional evaluation of peripheral nerve fibers regenerated through polyimide sieve electrodes over long-term implantation.
- Increase in gap-junctional intercellular communications (GJIC) of normal human dermal fibroblasts (NHDF) on surfaces coated with high-molecular-weight hyaluronic acid (HMW HA).
- Biocompatibility assessment of silicone oil and perfluorocarbon liquids used in retinal reattachement surgery in rat retinal cultures.
- Mechanical properties and osteoconductivity of new bioactive composites consisting of partially crystallized glass beads and poly(methyl methacrylate).
- Theoretical analysis of adsorption thermodynamics for hydrophobic peptide residues on SAM surfaces of varying functionality.
- Manipulation of bacterial adhesion and proliferation by surface charges of electrically polarized hydroxyapatite.
- Composite consisting of poly(methyl methacrylate) and alumina powder: An evaluation of their mechanical and biological properties.
- Biodegradable polyurethanes for implants. II. In vitro degradation and calcification of materials from poly(.EPSILON.-caprolactone)-poly(ethylene oxide) diols and various chain extenders.
- Fibrin as an alternative biopolymer to type-I collagen for the fabrication of a media equivalent.
- Electrospun nanofibrous structure: A novel scaffold for tissue engineering.
- Adsorption of proteins from infant and adult plasma to biomaterial surfaces.
- In vitro characterization and in vivo properties of a carbonated apatite bone cement.
- The porosity dependence of the dielectric constant for sintered hydroxyapatite.
- Biodegradation of carbonate apatite/collagen composite membrane and its controlled release of carbonate apatite.
- Viability, adhesion, and bone phenotype of osteoblast-like cells on polyelectrolyte multilayer films.
- Engineering vascular networks in porous polymer matrices.
- Stress influence on interface in plasma-sprayed hydroxyapatite coatings on titanium alloy.
1
61
- Three-dimensional macroporous calcium phosphate bioceramics with nested chitosan sponges for load-bearing bone implants.
- Trabecular bone response to injectable calcium phosphate (Ca-P) cement.
- Absorbable sandwich-like membrane for retinal-sheet transplantation.
- Bacterial adhesion onto azidated poly(vinyl chloride) surfaces.
- Transmission electron microscopic visualization of the degradation and phagocytosis of a poly-L-lactide screw in cancellous bone: A long-term experimental study.
- Dentin proteoglycans: An immunocytochemical FEISEM study.
- Histopathologic reaction of a calcium phosphate cement for alveolar ridge augmentation.
- Liquid photocurable biodegradable copolymers: In vivo degradation of photocured poly(.EPSILON.-caprolactone-co-trimethylene carbonate).
- Experimental studies on bone induction using low-molecular-weight poly (DL-lactide-co-glycolide) as a carrier for recombinant human bone morphogenetic protein-2.
- Self-curing acrylic formulations containing PMMA/PCL composites: Properties and antibiotic release behavior.
- Chondroinduction of mouse mesenchymal stem cells in three-dimensional highly porous matrix scaffolds.
- Improved sample preparation of biomaterials for in vitro genotoxicity testing using reference materials.
- Soft-tissue response to silicone and poly-L-lactic acid implants with a periodic or random surface micropattern.
- In vitro mineralization of a glass-ceramic of the MgO-3CaO P2O5-SiO2 system: Wettability studies.
- Synthesis of macroporous hydroxyapatite scaffolds for bone tissue engineering.
- Cytotoxicity of glutaraldehyde crosslinked collagen/poly(vinyl alcohol) films is by the mechanism of apoptosis.
- Effect of perforations in burr hole covers on cranial bone regeneration in rabbits.
- Mechanical and morphological study of biostable polyurethane heart valve leaflets explanted from sheep.
- Synthesis of pH-sensitive inulin hydrogels and characterization of their swelling properties.
- Detection of microscopic cracks in dental ceramic materials by fluorescent penetrant method.
- In vitro degradation and fracture toughness of multilayered porous poly(propylene fumarate)/.BETA.-tricalcium phosphate scaffolds.
- Biomaterial implants induce the inflammation marker CRP at the site of implantation.
2
- Modulation of marrow stromal osteoblast adhesion on biomimetic oligo[poly(ethylene glycol) fumarate] hydrogels modified with Arg-Gly-Asp peptides and a poly(ethylene glycol) spacer.
- In vivo evaluation of a dexamethasone/PLGA microsphere system designed to suppress the inflammatory tissue response to implantable medical devices.
- Poly(D,L-lactic acid-co-glycolic acid)-b-poly(ethylene glycol)-b-poly (D,L-lactic acid-co-glycolic acid) triblock copolymer and thermoreversible phase transition in water.
- Application of frog (Rana tigerina Daudin) skin collagen as a novel substrate in cell culture.
- Membrane-encased polymer millirods for sustained release of 5-fluorouracil.
- Interactions of 3T3 fibroblasts and endothelial cells with defined pore features.
- Micro-wear patterns on UHMWPE tibial inserts in total knee joint simulation.
- Characterization of angiogenesis and inflammation surrounding ePTFE implanted on the epicardium.
- Nanoscale modifications of PET polymer surfaces via oxygen-plasma discharge yield minimal changes in attachment and growth of mammalian epithelial and mesenchymal cells in vitro.
- The use of liposomal enrofloxacin for intracellular infections in Kangal dogs and visualization of phagocytosis of liposomes.
- Preparation of albumin preferential surfaces on poly(vinyl chloride) membranes via surface self-segregation.
- Adsorption characteristics of human plasma fibronectin in relationship to cell adhesion.
- Surface micromechanics of ultrahigh molecular weight polyethylene: Microindentation testing, crosslinking, and material behavior.
- Improvement in zirconia osseointegration by means of a biological glass coating: An in vitro and in vivo investigation.
- Interaction of human skin fibroblasts with moderate wettable polyacrylonitrile-copolymer membranes.
- In vitro dissolution of melt-derived 45S5 and sol-gel derived 58S bioactive glasses.
- Accelerated aging studies of UHMWPE. I. Effect of resin, processing, and radiation environment on resistance to mechanical degradation.
- Accelerated aging studies of UHMWPE. II. Virgin UHMWPE is not immune to oxidative degradation.
- An improved method to prepare hyaluronic acid and type II collagen composite matrices.
- Performance of a polyurethane vascular prosthesis carrying a dipyridamole (Persantin) coating on its lumenal surface.
3
- Effect of surface treatment of NiTi alloy on its corrosion behavior in Hanks' solution.
- Control of surface mineralization using collagen fibrils.
- Effects of ion concentration and pH on hydroxyapatite deposition from aqueous solution onto titanium by the thermal substrate method.
- Feasibility study using a natural compound (reuterin) produced by Lactobacillus reuteri in sterilizing and crosslinking biological tissues.
- Force spectroscopy study of the adhesion of plasma proteins to the surface of a dialysis membrane: Role of the nanoscale surface hydrophobicity and topography.
- Application of magnetic resonance microscopy to tissue engineering: A polylactide model.
- Sequential robust design methodology and X-ray photoelectron spectroscopy to analyze the grafting of hyaluronic acid to glass substrates.
- Initial interaction of U2OS cells with noncoated and calcium phosphate coated titanium substrates.
- Gene expression analysis of osteoblastic cells contacted by orthopedic implant particles.
- The sintered microsphere matrix for bone tissue engineering: In vitro osteoconductivity studies.
- Interaction of oxidation and crosslinking in gamma-irradiated ultrahigh molecular-weight polyethylene.
- Histological characterization of the early stages of bone morphogenetic protein-induced osteogenesis.
- Immunogenicity of polymeric implants: Long-term antibody response against polyester (Dacron) following the implantation of vascular prostheses into LEW.1A rats.
- Biocompatibility and in vivo gentamicin release from bioactive sol-gel glass implants.
- Surface modification by alkali and heat treatments in titanium alloys.
- Effect of fibrin sealant composition on human neutrophil chemotaxis.
- Attachment, spreading, and matrix formation by human gingival fibroblasts on porous-structured titanium alloy and calcium polyphosphate substrates.
- Synthesis, characterization, and cytocompatibility of elastomeric, biodegradable poly(ester-urethane)ureas based on poly(caprolactone) and putrescine.
4
- Biodegradation of polycarbonate-based polyurethanes by the human monocyte-derived macrophage and U937 cell systems.
- Thin film rheology and lubricity of hyaluronic acid solutions at a normal physiological concentration.
- Bioactivity of three CaO-P2O5-SiO2 sol-gel glasses.
- Flow properties of liquid calcium alginate polymer injected through medical microcatheters for endovascular embolization.
- Ion leaching from dental ceramics during static in vitro corrosion testing.
- Porous polymer/bioactive glass composites for soft-to-hard tissue interfaces.
- Interfacial tensile strength between polymethylmethacrylate-based bioactive bone cements and bone.
- Effects of dental resin components on vascular reactivity.
- Polymer-calcium phosphate cement composites for bone substitutes.
- Extended bioactivity in the proximity of hydroxyapatite ceramic surfaces induced by polarization charges.
- Characterization of a novel calcium phosphate/sulphate bone cement.
- Effects of substratum surface topography on the organization of cells and collagen fibers in collagen gel cultures.
- The effect of polyethylene particle phagocytosis on the viability of mature human macrophages.
- The biological effects of antiadhesion agents on activated RAW264.7 macrophages.
- Tribological investigation of oriented HDPE.
- Adsorbed poly(ethyleneoxide)-poly(propyleneoxide) copolymers on synthetic surfaces: Spectroscopy and microscopy of polymer structures and effects on adhesion of skin-borne bacteria.
- Kinetic study of citric acid influence on calcium phosphate bone cements as water-reducing agent.
- Delivery of insulin from hydroxyapatite ceramic microspheres: Preliminary in vivo studies.
1
62
- In vivo evaluation of a bioactive scaffold for bone tissue engineering.
- Poly(glutamic acid) poly(ethylene glycol) hydrogels prepared by photoinduced polymerization: Synthesis, characterization, and preliminary release studies of protein drugs.
- Influence of cosolvents and in situ forming hydroxyapatite on the mechanical characteristics of collagen films.
- Behavior of dense and porous hydroxyapatite implants and tissue response in rat femoral defects.
- Raman and IR studies on adsorption behavior of adhesive monomers in a metal primer for Au,Ag,Cu, and Cr surfaces.
- Glycosaminoglycan mimetics(RGTA) modulate adult skeletal muscle satellite cell proliferation in vitro.
- Interactions between MC3T3-E1 cells and textured Ti6Al4V surfaces.
- Mechanical behavior of chemically treated ostrich pericardium subjected to uniaxial tensile testing: Influence of the suture.
- In situ study of partially crystallized Bioglass and hydroxyapatite in vitro bioactivity using atomic force microscopy.
- Resorbable defect analog PLGA scaffolds using CO2 as solvent: Structural characterization.
- Synthesis of functionally graded MgCO3 apatite accelerating osteoblast adhesion.
- Analyses of rampant corrosion in stainless-steel retainers of orthodontic patients.
- A reporter-cell assay for the detection of BMP-2 immmobilized on porous and nonporous materials.
- Hyaluronate-heparin conjugate gels for the delivery of basic fibroblast growth factor(FGF-2).
- Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor.
- Osteoblast culture on polished titanium disks modified with phosphonic acids.
2
- Studies on the tumor promoting mechanism of hard and soft segment models of polyetherurethane: Tyr265 phosphorylation of connexin43 is a key step in the GJIC inhibitory reaction induced by polyetherurethane.
- Activation of caspase 3 during shear stress-induced neutrophil apoptosis on biomaterials.
- Repair of segmental defects in rabbit humeri with titanium fiber mesh cylinders containing recombinant human bone morphogenetic protein-2(rhBMP-2) and a synthetic polymer.
- Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants.
- Loading of collagen-heparan sulfate matrices with bFGF promotes angiogenesis and tissue generation in rats.
- Genetic synthesis and characterization of pH- and temperature-sensitive silk-elastinlike protein block copolymers.
- Response of normal female human osteoblasts(NHOst) to 17.BETA.-estradiol is modulated by implant surface morphology.
- Thermal property and processability of elastomeric polymer alloy composed of segmented polyurethane and phospholipid polymer.
- Tissue response to microfibers of different polymers: Polyester, polyethylene, polylactic acid, and polyurethane.
- Surface characteristics and dissolution behavior of plasma-sprayed hydroxyapatite coating.
- Low-dose, long-term exposures of dental material components alter human monocyte metabolism.
- Novel graft PLLA-based copolymers: Potential of their application to particle technology.
- Interaction of fibrinogen with surfaces of end-group-modified polyurethanes: A surface-specific sum-frequency-generation vibrational spectroscopy study.
- In vitro change in mechanical strength of .BETA.-tricalcium phosphate/copolymerized poly-L-lactide composites and their application for guided bone regeneration.
- The chick chorioallantoic membrane as a novel in vivo model for the testing of biomaterials.
- Improvement of the functions of osteoblasts seeded on modified poly(D,L-lactic acid) with poly(aspartic acid).
- Enhancement of osteogenesis on hydroxyapatite surface coated with synthetic peptide(EEEEEEEPRGDT) in vitro.
- New acrylic bone cements conjugated to vitamin E: Curing parameters, properties, and biocompatibility.
- In vivo drug distribution dynamics in thermoablated and normal rabbit livers from biodegradable polymers.
3
- A new vascular prosthesis coated with polyamino-acid urethane copolymer(PAU) to enhance endothelialization.
- Characterization of cartilagenous tissue formed on calcium polyphosphate substrates in vitro.
- Human monocyte response to retrieved polymethylmethacrylate particles.
- Theoretical investigation of elastic flexural properties for multistranded orthodontic archwires.
- Bone formation by rat bone marrow cells cultured on titanium fiber mesh: Effect on in vitro culture time.
- Collagen fiber disruption occurs independent of calcification in clinically explanted bioprosthetic heart valves.
- Optimization of monomethoxy-polyethylene glycol grafting on the pancreatic islet capsules.
- Calcium phosphate/chitosan composite scaffolds for controlled in vitro antibiotic drug release.
- Liquid acrylate-endcapped biodegradable poly(.EPSILON.-caprolactone-co-trimethylene carbonate). I. Preparation and visible light-induced photocuring characteristics.
- Liquid acrylate-endcapped biodegradable poly(.EPSILON.-caprolactone-co-trimethylene carbonate). II. Computer-aided stereolithographic microarchitectural surface photoconstructs.
- Characterization of microrough bioactive glass surface: Surface reactions and osteoblast responses in vitro.
- Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. Mechanically polished samples.
- A jet impingement investigation of osteoblastic cell adhesion.
- Tissue responses against immunoisolating alginate-PLL capsules in the immediate posttransplant period.
- Fabrication and surface modification of macroporous poly(L-lactic acid) and poly(L-lactic-co-glycolic acid)(70/30) cell scaffolds for human skin fibroblast cell culture.
- Adhesive phase separation at the dentin interface under wet bonding conditions.
- The most appropriate (Ca+Zn)/P molar ratio to minimize the zinc content of ZnTCP/HAP ceramic used in the promotion of bone formation.
- Novel approach for achieving double-layered cell sheets co-culture: Overlaying endothelial cell sheets onto monolayer hepatocytes utilizing temperature-responsive culture dishes.
4
- The participation of P- and E-selectins on biomaterial-mediated tissue responses.
- Intracellular signaling involved in macrophage adhesion and FBGC formation as mediated by ligand-substrate interaction.
- In vivo biocompatibility testing of peek polymer for a spinal implant system: A study in rabbits.
- Growth of connective tissue progenitor cells on microtextured polydimethylsiloxane surfaces.
- Biostability of electrically conductive polyester fabrics: An in vitro study.
- In vitro evaluation of phosphonylated low-density polyethylene for vascular applications.
- Pharmacological studies of RGTA11, a heparan sulfate mimetic polymer, efficient on muscle regeneration.
- Surface engineering of poly(D,L-lactic acid) by entrapment of chitosan-based derivatives for the promotion of chondrogenesis.
- Oxidation-induced dynamic changes in morphology reflected on freeze-fractured surface of gamma-irradiated ultra-high molecular weight polyethylene components.
- Biocompatibility of dense hydroxyapatite prepared using an SPS process.
- Cell adhesion on poly(propylene fumarate-co-ethylene glycol) hydrogels.
- Adsorption/desorption phenomena on pure and Teflon AF-coated titania surfaces studied by dynamic contact angle analysis.
- Micropattern formation of apatite by combination of a biomimetic process and transcription of resist pattern.
- In vivo evaluation of hydroxyapatite foams.
- Preparation of calcium aluminate cement for hard tissue repair: Effects of lithium fluoride and maleic acid on setting behavior, compressive strength, and biocompatibility.
- Synthesis and characterization of hydroxyapatite crystals: A review study on the analytical methods.
- Adhesion and growth of endothelial cell on amphiphilic PU/PS IPN surface: Effect of amphiphilic balance and immobilized collagen.
- Synthesis and photopolymerization of trifunctional methacrylates and their application as dental monomers.
1
63
- Effect of Porosity Reduction by Compaction on Compressive Strength and Microstructure of Calcium Phosphate Cement.
- The Role of Seprafilm bioresorbable Membrane in the Prevention and Therapy of Endometrial Synechiae.
- Interlaboratory Validation of Oxidation-Index Measurement Methods for UHMWPE after Long-Term Shelf Aging.
- The Effects of Localized Cold Work on the Heating Characteristics of Thermal Therapy Implants.
- Collagen and Bone Viscoelasticity: A Dynamic Mechanical Analysis.
- Evaluation of a Novel Hemostatic Device in an Ovine Parenchymal Organ Bleeding Model of Normal and Impaired Hemostasis.
- Effect of Sodium Content on the Crystallization Behavior of Fluoramphibole Glass-Ceramics.
- Cytotoxicity of Modern Dentin Adhesives-In Vitro Testing On Gingival Fibroblasts.
- Fixation Strength of Tapered versus Bicylindrical Hydroxyapatite-Coated External Fixation Pins: An Animal Study.
- A Composite Graft Material Containing Bone Particles and Collagen in Osteoinduction in Mouse.
- The Effect of Structural Characteristics on the In Vitro Bioactivity of Hydroxyapatite.
2
- In Vitro Behavior of Sintered Powder Injection Molded Ti-6Al-4V/HA.
- Characterization of New Acrylic Bone Cements Prepared with Oleic Acid Derivatives.
- Deposition of 90YPO4 and 144CePO4 Radioisotopes on Polymer Surfaces for Radiation Delivery Devices.
- The Contribution of Coating Microstructure to Degradation and Particle Release in Hydroxyapatite Coated Prostheses.
- Degradation Characteristics of .ALPHA. and .BETA. Tri-Calcium-Phosphate (TCP) in Minipigs.
- Surface Modification of an Experimental Silicone Rubber Aimed at Reducing Initial Candidal Adhesion.
- Functional and Morphological Evaluation of a Low-Weight, Monofilament Polypropylene Mesh for Hernia Repair.
- Characterization of Damage Modes in Dental Ceramic Bilayer Structures.
- Effect of Additives on the Microstructure and Thermal Properties of a Mica-Based Glass-Ceramic.
- The Effect of Processing Conditions on the Properties of Poly(methyl methacrylate) Fibers.
- Macroporous Poly(L-lactide) Scaffold. 1. Preparation of a Macroporous Scaffold by Liquid-Liquid Phase Separation of a PLLA-Dioxane-Water System.
- A New Electrochemically Graded Hydroxyapatite Coating for Osteosynthetic Implants Promotes Implant Osteointegration in a Rat Model.
- Mechanical Properties of Newly Developed Loop Ligament for Connection between the EndoButton and Hamstring Tendons: Comparison with Ethibond Sutures and EndoButton Tape.
- Healing Process Induced by Three Composite Prostheses in the Repair of Abdominal Wall Defects.
- Rheological Properties of Acrylic Bone Cement During Curing and the Role of the Size of the Powder Particles.
- Bioactivity and Osseointegration Study of Calcium Phosphate Ceramic of Different Chemical Composition.
- Thermal Analysis of Dental Resins Cured with Blue Light-Emitting Diodes (LEDs).
- Cytotoxicity of Precious and Nonprecious Alloys. Experimental Comparison of In Vitro Data from Two Laboratories.
- Permeation of Protein from Porous Poly(.EPSILON.-caprolactone) Films.
- Flexural Strength Distribution of a PMMA-Based Bone Cement.
- Bioactive Glass as Bone-Graft Substitute for Posterior Spinal Fusion in Rabbit.
3
- Slow-Releasing Potential of Vancomycin-Loaded Porous Hydroxyapatite Blocks Implanted into MRSA Osteomyelitis.
- A Scanning Electron Microscopy Study of Human Osteoblast Morphology on Five Orthopedic Metals.
- Ce-TZP/Al2O3 Nanocomposite as a Bearing Material in Total Joint Replacement.
- Preparation of Macroporous Biodegradable PLGA Scaffolds for Cell Attachment with the Use of Mixed Salts as Porogen Additives.
- The Hydrolytic Degradation of Polydioxanone (PDSII) Sutures. Part I: Morphological Aspects.
- The Hydrolytic Degradation of Polydioxanone (PDSII) Sutures. Part II: Micromechanisms of Deformation.
- Long-Term Quantification of the Release of Monomers from Dental Resin Composites and a Resin-Modified Glass Ionomer Cement.
- Micromorphological Changes in Resin-Dentin Bonds after 1 Year of Water Storage.
- A Comparison of the Shapes of Hydroxyapatite Implants before and after Implantation.
- Porous Structure of Purevision versus Focus Night&Day and Conventional Hydrogel Contact Lenses.
- Adhesion Barriers of Carboxymethylcellulose and Polyethylene Oxide Composite Gels.
- Preparation of Blood-Compatible Hollow Fibers from a Polymer Alloy Composed of Polysulfone and 2-Methacryloyloxyethyl Phosphorylcholine Polymer.
- Ultimate Tensile Strength of Dentin: Evidence for a Damage Mechanics Approach to Dentin Failure.
- Lactic Acid Based PEU/HA and PEU/BCP Composites: Dynamic Mechanical Characterization of Hydrolysis.
- The Influence of Material and Design Features on the Mechanical Properties of Transpedicular Spinal Fixation Implants.
- Investigation of Interfacial Strength and Its Structure on the Development of a New Design of UHMWPE Acetabular Component.
- Superabsorbent Materials from Shellfish Waste. A Review.
4
- Osteogenic Stem Cells and Orthopedic Engineering: Summary and Update.
- Mineralization Followup with the Use of NMR Spectroscopy and Others.
- The Effect of the Monomer-to-Powder Ratio on the Material Properties of Acrylic Bone Cement.
- The Influence of Culture Conditions on Extracellular Matrix Proteins Synthesized by Osteoblasts Derived from Rabbit Bone Marrow.
- The Biodegradation Mechanism of Calcium Phosphate Biomaterials in Bone.
- Bone Colonization of .BETA.-TCP Granules Incorporated in Brushite Cements.
- Influence of Resinous Monomers on the Differentiation in Vitro of Human Pulp Cells into Odontoblasts.
- Model of the Mechanism of Ca Loss by Bones under Microgravity and Earth Conditions.
- Surface Structure Study of Biological Calcium Phosphate Apatite Crystals from Human Tooth Enamel.
- Development of a New Ultrasonic Technique for Bone and Biomaterials In Vitro Characterization.
- Study of a Hydraulic Dicalcium Phosphate Dihydrate/Calcium Oxide-Based Cement for Dental Applications.
5
- Key Issues Involved With the Use of Miniature Specimens in the Characterization of the Mechanical Behavior of Polymeric Biomaterials. A Review.
- Ion Release in Patients with Metal-on-Metal Hip Bearings in Total Joint Replacement: A Comparison with Metal-on-Polyethylene Bearings.
- Standardized Analysis of UHMWPE Wear Particles from Failed Total Joint Arthroplasties.
- An Investigation of the Cytotoxicity and Histocompatibility of In Situ Forming Lactic Acid Based Orthopedic Biomaterials.
- Deconvolution of Surface Topology for Quantification of Initial Wear in Highly Cross-Linked Acetabular Components for THA.
- Long-Term Biocompatibility of Implanted Polymer-Based Intrafascicular Electrodes.
- Implantation Study of a Novel Hydroxyapatite/Collagen(HAp/Col) Composite into Weight-Bearing Sites of Dogs.
- Characteristics and Porcelain Bond Strength of (Ti,Al)N Coating on Dental Alloys.
- Effect of Water Treatment on the Apatite-Forming Ability of NaOH-Treated Titanium Metal.
- Comparison of Two Methods to Measure Permeability of Dentin.
- Effect of Bleaching Agents on the Fluoride Release and Microhardness of Dental Materials.
- Evaluation of Feasibility of Hydroxyapatite Putty as a Local Hemostatic Agent for Bone.
- Morphologic and Immunohistochemical Observations of Tissues Surrounding Retrieved Transvenous Pacemaker Leads.
- Gamma Irradiation Alters Fatigue-Crack Behavior and Fracture Toughness in 1900H and GUR 1050 UHMWPE.
- Carbon Dioxide Extraction of Residual Chloroform from Biodegradable Polymers.
- Biomembranes Enriched with TGF.BETA.1, Favor Bone Matrix Protein Expression by Human Osteoblasts in Vitro.
- Biological Reactivity of Zirconia-Hydroxyapatite Composites.
- Extracellular Matrix of Human Amnion Manufactured into Tubes as Conduits for Peripheral Nerve Regeneration.
- Histological Examination of .BETA.-Tricalcium Phosphate Graft in Human Femur.
- The Peak-Amplitude Method of Vibration Analysis for Nondestructively Studying the Structural Integrity of Dental Gypsum.
- Chitosan-Alginate PEC Membrane as a Wound Dressing: Assessment of Incisional Wound Healing.
- Effect of Ball Milling on the Processing of Bone substitutes with Calcium Phosphate Powders.
- Theoretical Prediction and Experimental Determination of the Effect of Mold Characteristics on Temperature and Monomer Conversion Fraction Profiles During Polymerization of a PMMA-Based Bone Cement.
- Cytotoxicity of Ingredients of Various Dental Materials and Related Compounds in L2- and A549 Cells.
- A Field-Focusing Device to Increase Power Output of ThermoRod Implants for Thermal Ablation of Tissue.
- Effect of Surface Conditions on the Color of Dental Resin Composites.
- The Electrochemical Behavior of Ti-6Al-7Nb Alloy with and without Plasma-Sprayed Hydroxyapatite Coating in Hank's Solution.
- The Influence of System Compliance and Sample Geometry on Composite Polymerization Shrinkage Stress.
6
- The Long-Term Behavior of Poly-L-Lactide Screws in a Minipig Fracture Model: Preliminary Report.
- S/e-PTFE Episcleral Buckling Implants: An Experimental and Histopathologic Study.
- Heparin Release from Slippery-when-Wet Guide Wires for Intravascular Use.
- Long-Term Stability of a Coronary Stent Coating Post-Implantation.
- Osseointegration on Metallic Implant Surfaces: Effects of Microgeometry and Growth Factor Treatment.
- Hydroxyapatite-Based Composite for Dental Implants: An In Vivo Removal Torque Experiment.
- Mechanical Properties of Coagulated Albumin and Failure Mechanisms of Liver Repaired with the Use of an Argon-Beam Coagulator with Albumin.
- Knoop Hardness Depth Profiles and Compressive Strength of Selected Dental Composites Polymerized with Halogen and LED Light Curing Technologies.
- Biaxial Flex-Fatigue and Viral Penetration of Natural Rubber Latex Gloves Before and After Artificial Aging.
- Effect of TEGDMA on the Intracellular Glutathione Concentration of Human Gingival Fibroblasts.
- In Vitro and in Vivo Degradation of Bioabsorbable PLLA Spinal Fusion Cages.
- Machinability of Cast Commercial Titanium Alloys.
- Do Multifilament Alloplastic Meshes Increase the Infection Rate? Analysis of the Polymeric Surface, the Bacteria Adherence, and the In Vivo Consequences in a Rat Model.
- Tissue Reaction and Biodegradation Of Implanted Cross-Linked High Amylose Starch in Rats.
- Lifetime Prediction of CAD/CAM Dental Ceramics.
- The Anticorrosion Ability of Titanium Nitride(TiN) Plating on an Orthodontic Metal Bracket and Its Biocompatibility.
- Predictive Modeling of the Mechanical Properties of Particulate Hydroxyapatite Reinforced Polymer Composites.
- Effect of Antibotics on the Properties of Poly(Methylmethacrylate)-Based Bone Cement.
- In Vivo Release of Vancomycin from Biodegradable Beads.
- An Evaluation of the Cytotoxic Effects of Orthodontic Bonding Adhesives upon a Primary Human Oral Gingival Fibroblast Culture and a Permanent, Human Oral Cancer-Cell Line.
- Immobilization of an Oxalate-Degrading Enzyme on Silicone Elastomer.
- Light Scattering and In Vitro Biocompatibility Studies of Poly(Vinyl Pyrrolidone) Derivatives with Amino-Acid-Dependent Groups.
- Immobilization of Natural Macromolecules on Poly-L-Lactic Acid Membrane Surface in Order to Improve Its Cytocompatibility.
- Wear of Conventional and Cross-Linked Ultra-High-Molecular-Weight Polyethylene Acetabular Cups against Polished and Roughened CoCr Femoral Heads in a Biaxial Hip Simulator.
- Optimizing the Tensile Properties of Polyvinyl Alcohol Hydrogel for the Construction of a Bioprosthetic Heart Valve Stent.
1
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
