|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
JSME Int Journal. Ser C. Mech Systems, Mach Elem Manuf
45
- Three-Dimensional Vibration Analysis of Paraboloidal Shells.
- Micro-Control Actions of Segmented Actuator Patches Laminated on Deep Paraboloidal Shells.
- Dynamic Characteristics of Cylindrical Composite Panels with Co-cured and Constrained Viscoelastic Layers.
- Identification of Elastic Parameters for Laminated Circular Cylindrical Shells. Comparison of Numerical and Experimental Results.
- A Study on Refined Analytical Method for Free Vibration Analysis of Laminated Composite Cylindrical Shells Using Equivalent Curvatures.
- Analytical Study of Vertical and Torsional Free Vibration of Cable Supported Bridge Decks.
- Influence of Initial Tension on Out-Plane Vibrations of a Rotating Circular Plate.
- Noncontact Vibration Control of a Magnetic Levitated Rectangular Thin Steel Plate.
- Vibration and Control of Axially Moving Crawler Used for Tracked Vehicles.
- Reduced-Order Nonlinear Modal Equations of Plates Based on the Finite Element Method.
- Optimization Approach for Reducing Sound Power from a Vibrating Plate by Its Curvature Design.
- Simultaneous Optimal Design of Stiffness and Damping of a Flexible Structure Reinforced by FRP Sheets.
- The Study of Analytical Models for Vibration of Cross-ply Laminated Thick Plates.
- Vibration Analysis of Shear-deformable Circular and Elliptical Laminated Composite Plates.
- A Bispectrum Feature Extraction Enhanced Structure Damage Detection Approach.
- Simultaneous Structure-Control Optimization of a Steering Wheel for Vibration Suppression.
- Curving Analysis of Modified Designs of Passenger Railway Vehicle Trucks.
- Lateral Stability Simulation of a Rail Truck on Roller Rig.
- Lateral Stability and Steady State Curving Performance of Unconventional Rail Trucks.
- Robust Model Following Control for Uncertain Systems with Input Nonlinearities.
- Robust Nonlinear H2/H.INF. Control for a Parallel Inverted Pendulum with Dry Friction.
- A Constrained Multibody System Dynamics Avoiding Kinematic Singularities.
- A Global Sliding-Mode Control Scheme with Adjustable Robustness for A Linear Variable Reluctance Motor.
- Optimal Tracking Design for Sampled-Data Systems with Input Time Delay under State and Control Constraints.
- A Study on Stability Characteristics of Actively Controlled Hydrodynamic Journal Bearings.
- Design of the Electronic Brake Pressure Modulator Using a Direct Adaptive Fuzzy Controller in Commercial Vehicles for the Safety of Braking in Fail.
- Tolerance Allocation of Sheet Metal Assembly Using a Finite Element Model.
- Autonomous Behavior-Mode Switching in a Two-Mobile Robotic System. S-Temperature Based On-line Learning.
- Neuro-Fuzzy Dynamic Obstacle Avoidance for Autonomous Robot Manipulators.
- A Multiple RCC Device for Polygonal Peg Insertion.
- 3-Dimensional Elastohydrodynamic Lubrication Analysis on the Cam-Roller Contact with Consideration of Roller Profiling.
- Dynamic Routing in Automated Guided Vehicle Systems.
- System Matrices Identification of Structure: An Insensitive Procedure for Data Point Configurations.
- Coining Process Design by the Three-Dimensional Backward Tracing Scheme of the Finite Element Method and Its Experimental Confirmation.
- Creative Design of Double Safety Shoes Mechanisms.
2
- Vibration Suppression Design of Adaptive Truss Structures by Simulated Annealing.
- Modeling, Control and Experiment of a Feedback Active Noise Control System for Free Sound Fields.
- General Collocation Method for Three Dimensional Acoustic Analysis of a Simple Expansion Chamber.
- Nonlinear Analysis of Friction Induced Vibrations of a Two-degree-of-freedom Model for Disc Brake Squeal Noise.
- Nonlinear Vibration Control by Semi-active Piezo-actuator Damping.
- Neuro-Fuzzy Control for Pneumatic Servo System.
- Robust Position and Attitude Control of an Active Vibration Isolation System.
- Variable Structure Controller Design for Output Tracking of a Class of Discrete-time Nonlinear Systems.
- The Neural-fuzzy Thermal Error Compensation Controller on CNC Machining Center.
- Sensor Fusion and Bang-Bang Control with Nonholonomic Constraints.
- Optimal Motion Cueing Algorithm Using the Human Body Model.
- Dynamic Analysis of the X-shaped Groove Aerostatic Bearings with Disk-Spring Compensator.
- Investigation of the Impedance Characteristic of Human Arm for Development of Robots to Cooperate with Humans.
- Optimum Tolerances Synthesis for Globoidal Cam Mechanisms.
- Influences of Newly Formed Woven Bone on Tissue Stresses in Rat Caudal Vertebrae Subjected to Mechanical Loading (A Study Based on Morphological Measurement Using a Micro-CT and Computational Stress Analysis).
- Extended Assemblability Evaluation Method (AEM). Extended Quantitative Assembly Producibility Evaluation for Assembled Parts and Products.
- Collaborative Design Supporting System for Manufacturing Systems.
- Shape Imperfection in Cylindrical Cups Formed by Processes of Deep- and Stretch-Drawing with Ironing.
- Development of Micro Ultrasonic Abrasive Machining System. 1st Report. Studies in Micro Ultrasonic Abrasive Machining.
- D-Stability Analysis for a Class of Uncertain Discrete Systems with Multiple Time Delays.
- Wiener-Hammerstein Model Identification-Recursive Algorithms.
- Analysis and Synthesis of General-Type Goldberg Five-Revolute Mechanism.
- Normal Meshes for Multiresolution Analysis of Irregular Meshes with Boundaries.
- Dual Mode Transmission Designs for Motorcycles.
- Analysis of Spherical Form Errors to Coordinate Measuring Machine Data.
3
- Integrated Study of Time-Frequency Representations and Their Applications in Source Identification of Mechanical Noise.
- A Finite Annular Plate Element with Slight Deviation for Vibration Analysis of a Nearly Axisymmetric Disk.
- Sliding Mode Control for Uncertain Neutral Delay-Differential Systems.
- A Data Conversion Technique for Accurate Interferometric Testing of Spherical Surfaces.
- Development of Power Assisting Suit for Assisting Nurse Labor.
- VSS Controller Design for Gap Control of EDM.
- Strain Rate Self-Sensing of a Piezoelectric Material with the Phase Delay Compensation.
- Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom.
- Motion Control of Flexible Manipulator Possessing Unactuated Joints.
- Cross-Coupling Control for a Direct-Drive Robot.
- A Distributed Navigation Strategy for Multiple Mobile Robots to Make Group Formations Adapting to Geometrical Constraints.
- Quasi-linear H2/H.INF./LTR Control of Vertical Parallel Flexible Structures Connected by a Spring.
- A Model Reference Variable Structure Controller Design for Time-Delay Systems with Input Nonlinearities.
- The Position Tracking Control of Precise Servo Systems with Nonlinear Dynamic Friction Using Variable Structure Control and Friction Observer.
- Evaluation of Bending Strength of Carburized Gears Based on Inferential Identification of Principal Surface Layer Defects.
- Analysis of Bubbly Lubrication in Journal Bearings.
- Wear Reduction Effects of Ca Sulfonate on Coated Tools in Hobbing.
4
- Mechanisms of Protrusion and Cell Locomotion. Actomyosin-based Contraction in the Cell Body and Uropod Rather than Actin-based Motors at the Leading Front Drives Locomotion of Walker Carcinosarcoma Cells.
- Recent Advances in Cartilage Tissue Engineering: From the Choice of Cell Sources to the Use of Bioreactors.
- Active Force Generated by the Motility of the Outer Hair Cell.
- Tensile Properties of Contractile and Synthetic Vascular Smooth Muscle Cells.
- Numerical Simulation of Stress Fiber Orientation in Cultured Endothelial Cells under Biaxial Cyclic Deformation Using the Strain Limit Hypothesis.
- Simultaneous Measurement of [Ca2+]i and Membrane Potential under Mechanical or Biochemical Stimulation.
- Specific Mechanical and Structural Responses of Cortical and Cytosolic Cytoskeleton in Living Adherent Cells.
- Analysis of Stress and Strain Distribution in the Artery Wall Consisted of Layers with Different Elastic Modulus and Opening Angle.
- A Computational Fluid Mechanical Study on the Effects of Opening and Closing of the Mitral Orifice on a Transmitral Flow Velocity Profile and an Early Diastolic Intraventricular Flow.
- Microwave Therapy for Bone Tumors.
- Micromechanics of Minor Cervical Spine Injuries.
- Morphological and Mechanical Properties of Bone Structural Units: A Two-Case Study.
- New Approaches to Solute Transport Measurement in Mechanically Loaded Articular Cartilage.
- Microcomputer-based Acceleration Sensor Device for Swimming Stroke Monitoring.
- A Magnetic Tracking System based on Highly Sensitive Integrated Hall Sensors.
- Transit Characteristics of a Neutrophil Passing Through a Circular Constriction in a Cylindrical Capillary Vessel. Effect of Mechanical Properties of the Cell and Constriction Geometry.
- Shear Evaluation by Quantitative Flow Visualization Near the Casing Surface of a Centrifugal Blood Pump.
- An Image-Based Computational Fluid Dynamic Method for Haemodynamic Simulation.
- Modeling of the Human Aortic Arch with Its Major Branches for Computational Fluid Dynamics Simulation of the Blood Flow.
- Computer Simulation of Blood Flow, Left Ventricular Wall Motion and Their Interrelationship by Fluid-Structure Interaction Finite Element Method.
- Profile Measurement of Worn Acetabular Cup by Holographic Contouring.
- Anatomical and Functional Images of in vitro and in vivo Tissues by NIR Time-domain Diffuse Optical Tomography.
- Computer Simulation Study of Human Locomotion with a Three-Dimensional Entire-Body Neuro-Musculo-Skeletal Model. I. Acquisition of Normal Walking.
- Computer Simulation Study of Human Locomotion with a Three-Dimensional Entire-Body Neuro-Musculo-Skeletal Model. II. Biomechanical Relationship between Walking Stability and Neuro-Musculo-Skeletal System.
- Computer Simulation Study of Human Locomotion with a Three-Dimensional Entire-Body Neuro-Musculo-Skeletal Model. III. Simulation of Pathological Walking and Its Application to Rehabilitation Engineering.
- Computer Simulation Study of Human Locomotion with a Three-Dimensional Entire-Body Neuro-Musculo-Skeletal Model. IV. Simulation of Running Motion and Its Transition Process.
- Biomechanics of Rowing. I. A Model Analysis of Musculo-Skeletal Loads in Rowing for Fitness.
- Biomechanics of Rowing. II. A Control Model for the Simulation Study of Rowing and Other Human Movement.
- A Study on the Surface Shape of Fish Scales.
1
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
