|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Machine Design and Tribology Division Meeting in JSME
2nd
- The present and the future of high accurate finishing in gear cutting.
- Micro Systems(Micromachines, MEMS/MOEMS) and their Applications.
- A Survey of Tactile Sensors and Displays.
- The State of Research on Tribology in Sweden.
- Residual Stresses and Hardened Layers of Gears Due to Dual Frequency Induction Hardening.
- Development of Case-Carburized Gears for the High Load-Carrying Capacity. Influence of Shot Peening Processes on Surface Durability.
- Fatigue Strength Simulation of Carburized Gears based on Weibull Distribution of Inclusions.
- Global Local Finite Element Method(GLFEM) in Gear Tooth Stress Analysis. Application of Tooth Flank Film Element.
- Observation of Modal Vibration on Thin Webbed Parallel Axes Gears.
- Vibration Behavior of a Helical Gear Pair under Light Load Condition. Experimental Verification of Meshing Properties.
- Evaluation system of sideband noise of mesh frequency in bevel gears.
- Power Loss of Bevel Gear Drives.
- A Study on Gear Mesh Loss Reduction of Cylindrical Gear.
- Tooth Bearing Evaluation System for Hypoid Gears using Artificial Intelligence.
- Design and Performance of Tooth Surfaces of Cylindrical Gears.
- Study on Small-size Hourglass Worm Gear with a High Performance. (1st Report).
- Study on Small-size Hourglass Worm Gear with a High Performance. (2nd Report).
- Study on Small-size Hourglass Worm Gear with a High Performance. (3rd Report).
- Possibility of Rapid Detection of Tooth Form Deviation by Laser Holography.
- A Study of Variable Speed Transmission with Combined Planetary Gear Train.
- Development of CVT Applying Crossed Axle Traction Drive. 2nd Report: Prototype and Evaluation.
- Deformation and Fatigue Failure in Dry Hybrid Belt.
- Bending Fatigue Resistance of Cords.
- Mechanism of Fatigue Failure of Synchronous Belt.
- Transmission Error in Helical Synchronous Belt Drives in Bidirectional Operation. No Load.
- A Study on Jumping of Synchronous Belt Drives(Mechanisms of Jumping).
- A Basic Study on Sandwich-Belts Conveyor. Belt's Tension and Slip.
- A Displacement Analysis of 2-DOF MEMS Optical Switches.
- Development of a micromanipulator made of diamond having reversal mechanism.
- Study on foil bearing. Stiffness effect.
- A Control Method of Spherical Ultrasonic Motors with a Magnetized Rotor.
- Trajectory Generation of Manipulators by Heuristic Algorithms.
- Study on Dynamic Stresses for Planar Four-Bar Mechanism.
- Improvement of Accuracy for Parallel Mechanism. Compensation Method of Joint Error and Thermal Expansion.
- Kinematic Calibration of a Spatial Six-Degree-of-Freedom In-Parallel Actuated Mechanism Using a Fourier Series. Investigation of Identified Kinematic Parameters.
- Kinematic Analysis of a Spatial Parallel Manipulator with 3DOF.
- A Microactuator Making Use of ECF Jet flows with Needle-type Electrodes. Proposition and Characteristic Evaluation of a Large Model.
- Control of linear drive system using ECF.
- An ER Valve-Integrated Microactuator.
- A Fluid Power Source with High Power Density for Microfactory.
- Development of nutation motors. 1st report. Design and basic characteristics of pneumatic nutation motor.
- Analysis of Low Pressure Water Hydraulic drive System with Flexible Long Tube.
- Development of Three-Degrees-of-Freedom Precision Stage Constructed of Electromagnetic Actuator Using Rubber Film.
- Method for Detecting the Friction Coefficient using Strain Inside an Elastic Finger Having Curved Surface.
- A Study on The Tactile Sensor with Multi Artificial Whiskers.
- Development of High Power Linear Ultrasonic Motor using Optimum Geometry Design Method.
- Development of Multi-Layered Composite PZT Thin Films using Sol-Gel and Sputtering Process.
- Effect of Polarizing Applied Voltage on Photovoltaic Effect of PLZT Element for Optical Motor.
- On Occurrence of Dimple in EHL Conditions. An Explanation with Measured Results of Temperature Profiles across Oil Film.
- Soft-EHL Analyses of Sliding Surface Structure and Development of Tribo-Sheet.
- A Study on the Transition of Traction Coefficient of Lubricants with Temperature Change Based on Lubrication Regime Diagram.
- Experimental Investigation on the Change of Traction Coefficient .MU. of Lubricants in the Lower Temperature Range. Construction of .MU. Contour Lines on Lubrication Regime Diagram.
- Tribological Performance of Particle Dispersed Composite Plating in High Vacuum.
- A study on ultra low friction of a-CNx in nitrogen gas.
- Ball Bearing Life of Biodegradable Vegetable Oils.
- A Study on Rolling Contact Fatigue of Si3N4 Ceramics. 2nd Report. A Examination of Influence of Lubrication.
- Effects of Substrate Surface Treatment on Durability of Thermally Sprayed WC Cermet Coating in Rolling/Sliding Contact.
- Frictional Properties of Super-Water-Repellent Coating Films by the Sol-gel Method.
- Friction and wear of spheroidal graphite cast iron under high sliding speed and high contact pressure.
- An Active-head Slider with a Piezoelectric Actuator for Controlling Flying Height.
- Development Research of the Aluminum Alloy Bolt. Relation between FEM analysis and product evaluation by the nano-indentation hardness.
- Study on multi-objective optimising design method for transmission system.
- A Study of Face Gear-set Which Has Non-intersect and Inclined Axes.
- Experimental Study of Visualization of an Abnormal Sound Source Location at a Rolling Bearing with a Fault.
- An Approach to Cam Curve Design According to Application Purposes.
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
