Science Links Japan | Papers of Technical Meeting on Rotating Machinery, IEE Japan

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Papers of Technical Meeting on Rotating Machinery, IEE Japan

RM-99

1-7

Friction coefficient of brushes to variable high current densities.
Effect of Surface Film to Sliding Contact Phenomena.
A Study on Commutation Arc and Brush Wear in Gasoline.
A making on highly effective in the Switched Reluctance Motor.
An Analysis of Parallel Connected Induction Machines.
The detect of the grounding for the DC machines.
Considerations for load-pattern S9, S10 associating with metal rolling motors.
8-15
Determination of Equivalent Circuit Constants Synchronous Machines from Expanded Dalton-Cameron Method.
Calculation for Design of Steady-State Reactances of a Pumped Storage Generator Considering Cross-Magnetization.
Temperature Distribution in the Stator Bar of Turbogenerator.
A Simulation Method of Transient Phenomena of Power System Including Induction Generators.
Equivalent Circuit of Induction Motor to reduce turns of Terminal Coils.
An Experimental Study on the Causes of Electromagnetic Vibration of A Capacitor Motor under Load Conditions.
Analysis of the Shaded-Type Motor Considering the Leakage Flux Using 2D-FEM.
Fundamental Characteristics of a Trial Rotary-Linear Induction Motor.
16-29
Derivation of Instantaneous Torque Equations from Stator Voltages and Currents of a Reluctance Motor.
Three Phase Magnetic Field Generator Inserted Iron Core in Cylindrical Space.
The Torque Characteristics Simulation of Induction Motor by using many kind of applied Voltage Wave Forms.
Examination of Performance Improvement Brushless DC Motors.
Investigation of Slot-Leakege Reactance on Concentrated Winding Brushless DC Motors.
Simulation of Dynamic Characteristics for Small Brushless DC motors.
Distribution of Magnetic Properties in Operating Induction Motor Core.
Simulation of Firing Timing and Torque Characteristics for SR Motor.
A Consideration on Characteristics Analysis of Switched Reluctance Motor.
Parameter Measurement for Synchronous Reluctance Motors Considering Stator and Rotor Iron Loss.
A Study On The Motor Mainly Using Reluctance Torque.
Fundamental Study on the Characteristics of Permanent-Magnet-Type Motor Considering the magnetic Properties of Core Material.
Recent situation of Technical developments and Application of SR motors in U.S.A.
A control method of the voltage and the frequency on the condenser-excited induction-generation systems.
30-35
The Commutation Spark Generation and Armature Terminal Voltage of Universal Motors.
Modeling and Simulation of Hybrid Stepping Motor Drives using PSpice.
Chaotic behavior of a stepping motor.
The high efficiency of a new standing wave type ultrasonic motor.
Effect of rotor configuration on Torque characteristics of the Interior Permanent Magnet Synchronous Motors.
Relation between pole piece form and commutation characteristics of permanent magnet type DC motor.
80-97
Construction of phase-domain model of an adjustable speed generator in terms of instantaneous values and its control blocks.
Determination of Starting Performance of Synchronous Machine from the Frequency Response Method.
A Consideration on the Accuracy of Various Synchronous Machine Models for Transient Stability Analysis.
An Analysis Of Superconducting Fault Current Limiter For Stabilization Of Synchonous Generators (Effect Of Fault Point).
Analysis Methods for Electromagnetic Characteristics of Salient-Pole Synchronous Machines.
Nonlinear Quasi Three-Dimensional Electromagnetic Field Analysis of Large Turbine Generators.
Development for Large Capacity Turbine Generator.
Magnetic flux distribution of the coil end of 2 pole turbine generator.
Analyses of Electrical Performance for 70MW Class Slow Response Excitation Type Superconducting Generator.
Development and Evaluation of Method for Continuous Monitoring and Anomaly Detection of Hydraulic Turbine Generator Vibration.
Design Optimization of Rotating Machine Based on The Estimation of Permeability Distribution-The Shape Optimization of Ventilation Holes in Induction Motors.
A Study on Estimation of Iron Loss in Switched Reluctance Motor.
Operating Characteristics of 8/6 Switched Reluctance Motor.
Theory and Performance of the BSC-Filter.
Performance Characteristics of a Laminated Core-Type Parametric Motor Using an asymmetric type stator.
An Experimental Study on the Causes of Electromagnetic Vibration of A Capacitor Motor under Load Conditions (Continued Report).
An Estimation Method of Starting Performance of Capacitor-start Single-phase Induction Motor.
A consideration for decreasing effect of iron loss using magnetic wedge in capacitor motor.
98-117
Comparison of Torque Calculations of Induction Motors Using Maxwell Stress Tensor and Equivalent Circuit.
A Method to Calculate The Speed-torque Characteristics of Induction Motor Using Step Response.
Equivalent Circuit and Calculation method of characteristic for Pole-Changing Induction Motor with Pole-Amplitude modulation(Pole-Changing from 6-Pole to 8-Pole or 4-Pole).
Transformation of Equivalent Circuit of Induction Motor for the Purpose of Performance Calculation.
Basic characteristics for 2phase AC motor driven by field oriented control.
Tracking Control of Robot Manipulator Using Neural Networks.
A control system synthesis for an inverter air-conditioner driven by brushless DC motor without speed sensor applied on partial state feedback control theory.
Transient Performance Analysis of a Shaft Generator System with a Load of an Induction Motor.
Harmonic Flux Analysis of 3-Phase Cage Induction Motor by Permeance Model.
Analysis of Current and Torque of Induction Motor on the Bus transfer.
Transient Phenomena on the Bus Transfer of Squirrel-Cage Motor.
Characteristic of Induction Motor to reduce turns of Terminal Coils.
A Study to Suppress Transient Torque Dip during Pole Change Operation of A Six-Phase Pole Change Induction Motor for Electric Vehicles.
Experimental Study of the Stray Load Loss for Three-Phase Induction Motors.
Starting Method and Running Characteristics of Single-Phase PM Motor.
Initial Rotor Position Estimation of Surface Permanent Magnet Synchronous Motor.
Distinguishing method of the magnetic polarity at standstill-mode for PM-motor using the partial magnetic saturation of stator core.
A Study of Characteristic Calculation for Permanent Magnet Synchronous Motor Using dq-axes Equations Considering Magnetic Saturation.
Decoupling Control Synthesis of Brushless DC Motor Using Magnetic Energy Model.
Sensorless Drive Method of Brushless DC Motors Based on Neural Network and Its Experiment.
118-129.131
Analysis of Torque Ripple and Instantaneous Torque Computed from Stator Voltages and Currents of Three-Phase Induction Motor fed by Voltage-Source Inverter.
Rotor Design Strategy of Interior Permanent Magnet Synchronous Motor.
Examination of Performance Improvement Brushless DC fan motors.
Characteristics Evaluation of PM type Stepping Motor as Blush-less Motor.
Effects of Rotor Slot Configuration on No-load EMF of Interior Permanent Magnet Synchronous Induction Motors.
Present Finishing Machine Used Various Excited Electro-Magnetic Field.
Investigation of Operating Characteristics of Three-Phase Small Induction Motor fed by Six-Stepped Wave-Voltage Inverter.
The Commutation Spark Generation in One Revolution of Universal Motors.
Best Selection of Motor Core Materials for Reduction of Motor Core Losses.
Development of Linear Switched Reluctance Motor for Fork Gear of Transferring Vehicle System.
Machine Performances of Permanent Magnet Assisted Synchronous Reluctance Motor.
Position Sensorless Drive Characteristics of SRM Including at Starting Condition.
Improvement of Torque and Radial Forces for Switched Reluctance Motor.
132-136
Improvement of Driving Characteristic of a Stepping Motor using Genetic Algorithm.
A Proposal of Precise Mathematical Model for High Peformance PM Motor Drives.
Rotor Loss of Interior Permanent Magnet Synchronous Induction Motor during Start-up.
Parameter Measurement Method Considering Iron Loss for Cylindrical Permanent Magnet Synchronous Motors.
Operating Characteristics Analysis of Interior Permanent Magnet Syncronous Motor(IPMSM) Using Magnetic Field Analysis.