Science Links Japan | Papers of Technical Meeting on Rotating Machinery, IEE Japan

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Papers of Technical Meeting on Rotating Machinery, IEE Japan

RM-01

1-7

The Study of Commutation Spark in Universal Motors by High-speed Camera.
An Measurement of Arc Energy by Commutation Spark and the Electric Field Intensity using Commutation Testing Machine.
An Effect of Gas Adsorption on the Contact Voltage Drop.
A wear characteristic of Carbon-fiber brush by Commutation Arc in Gasoline.
An Research of DC Machine Insulation Life Diagnosis based on Humidity Dependency of Insulation Resistance, using Model Coils.
An Investigation of Starting Characteristic in Small DC Motor.
The usefulness of instantaneous torque analysis method using the gage curves for SRM.
8-19
A Study on the Effect of Magnetic Saturation.
Analysis of Leakage inductances of a Salient-Pole Synchronous Machine with Damper Circuits.
Stator Core Loss and Rotor Copper Loss of Self-Starting Permanent Magnet Synchronous Motor.
Transient Performance Analysis of Interior Permanent Magnet Synchronous Generator with Damping Windings.
Life Estimation Technology and Rewinding with New Coil Resulting Improved Efficiency and Extended Life on Turbine Generator Stator Winding.
On-Line Partial Discharge Measurements of Hydro Power Generators.
Identification of T-II Type Equivalent Circuit Constants from Standstill Test.
Analysis of Surge Propagation in the Motor Winding.
The measuring of the voltage distributions in the stator windings of the induction motor applied by the single pulse generator.
A Calculation Method of Three-Phase Squirrel-Cage Induction Motor under Unbalanced Three-Phase Voltage Condition.
Study of Stray-Load Losses in Induction Motors.
Simulation of Wind Generator Considering Pitch Control System for Protecting Wind Turbine.
49-61
The Efficiency Improvement of SRM by the Optimization of the Applied Voltage.
New Developed SRM Drive System based on the Conventional 6 arms Power Module.
Non-linear Drive Characteristics Analysis- and GA-based Search for Optimum Control Parameters of SRM Drives.
Position Sensorless Drive Characteristics of SRM for Hydraulic Pump Unit.
Basic Considerations on Vibration Analysis of 6/4 Switched Reluctance Motor.
The Effect of Noise Reduction of Switched Reluctance Motor with Hole inside the Pole.
Magnetization Characteristics Analysis of SRM by Simplified Non-linear Magnetic Analysis.
A Fundamental Investigation about Maximum Torque Control of Synchronous Reluctance Motor.
A Position Sensor-less and Sine-wave Drive of PM Motor.
Current and position sensorless control of an interior permanent magnet motor.
The application to the IPMSM of Current Waveform Model Based Sensor-less Drive Method.
Analysis of Blushless DC Motor Dynamics Using Magnetic Circuit.
Optimizing Material Distribution of Interior Permanent Magnet Synchronous Motor using Genetic Algorithm.
62-68
Reduction of Vibration on Permanent Magnet Synchronous Motors with Considering Radial Stress.
Characteristics of 8 pole V type IPMSMs with Several Rotor Configurations.
Investigation of Brushless DC Motors with Concentrated Windings for Air Conditioners.
A Study on Low Speed V/f Control for Small Induction Motor.
Instantaneous Characteristic Measurements of LR Load with Symmetrical 3-Phase Distorted AC Supply Voltage.
Current Simulation of Five Phase Stepping Motor with New-Pentagon Connection.
Discussion on Relationship between Chaotic behavior of a Stepping Motor and Its Iron Loss.
107-128
Modeling of a Hybrid Excitation Type Synchronous Machine with a Rotor Divided into Two Parts Axially.
A fundamental characteristics examination of permanent magnet motor at asynchronous starting period.
Dynamic Analysis of Distribute Winding Brushless DC Motor using RNA Method.
The Reduction Method of vibration and noise on IPM Motors with CAE.
Reduction of Rotor Eddy Current Loss in High Speed, Permanent Magnet Generator.
Analysis of Eddy Current Loss in Permanent Magnet under Alternating Magnetic Field.
Development of Flat Type Permanent Magnet Motor For Machine-Room-Less Elevator.
Magnetize Method for Rotor Magnets of the Traction Machine for the Machine-Room-Less Elevator.
Development of Totally-enclosed Type Traction Motor (Improvement of the Cooling System).
Design and Properties of Synchronous Reluctance Motors with Composite Magnetic Material Rotor.
The effect of iron loss for the switched reluctance motor in PWM drive.
Stabilization of Synchronous Generators by Superconducting Fault Current Limiter in the Case of Unsuccessful Reclosing.
On the Synchronous Reactance at Various Loads.
A Consideration on the Characteristics of d and q Axes Parameters of Synchronous Machines.
Performance Analysis of a Self-Excited Alternating Generator System Considering the Effects of Magnetic Saturation.
A Study on Parallel Operation of a Shaft Generator System with a Power System.
A Study on Computation Accuracy of Non-salient Machine Model.
Prediction of Starting Performance of Solid Pole Salient-Type Synchronous Motors by DC Testing Method.
Stabilization of Synchronous Generator by Fuzzy Logic Controlled Braking Resistor. Part 2.
A Basic Study of Fuzzy-Logic-Based Power System Stabilization with Doubly-Fed Asynchronous Machine.
Pulling into Synchronism of Synchronous Motor considering the Pulsation Torque.
Asynchronous Torque Characteristics of VR Type Vernier Motor.
129-158
Torque and Magnetic Energy Decoupling Control in Induction Machine with Nonlinear Observer.
Control System Synthesis of Efficiency Optimized Induction Motor with Field Orientation by Nonlinear Observer.
Current Sensorless Identification Method of Motor Parameter for PM Motor.
The application to the IPMSM of Current Waveform Model Based Sensor-less Drive Method. (2).
A Position Sensorless Speed Control Systems of SRM Based on Impressed Voltage Pulse.
An Initial Estimation Method of Rotor Salient-pole Position for SRM.
A study of the optimal ventilation control system in the underground parking lot.
The analytical model of parametric induction motor considered the distribution of magnetic flux flowing into the rotor.
A decrease effect of pulsating loss for tooth in a capacitor motor with ferrite magnetic wedges application.
Development of High Thermal Conductive Mica Insulation System.
Heat Transfer Characteristics of Stator Coils using High Thermal Conductivity Insulation.
On-Line Partial Discharge Phenomenon of Hydro Power Generators.
Experimental Study of the Stray Load Loss for Three-Phase Squirrel-Cage Induction Motors. Fourth Report. Comparison of four methods.
Loss Calculation of Induction Motors Considering Harmonic Electromagnetic Fields in Stator and Rotor.
Analysis of Cage Induction Motor Considering magnetic saturation by Permeance Model.
The Improvements of Torque Characteristics for A New Prototype Six-Phase Pole Change Induction Motor for EVs.
Instantaneous Characteristic Measurements of a Three-Phase Induction Motor fed by Voltage-Source Inverter.
Effects of Skewed Slots on the Electromagnetic Vibrations of A Capacitor Induction Motor under Load Conditions.
Modeling of a Permanent Magnet Induction Machine.
A Method to Calculate the Current Performance of a Linear Induction Motor taking into consideration the Mutual Inductance between windings.
Characteristic Calclation Method of Pole-changing Induction Motor with Easy Procedure of Pole-Amplitude modulation.
Wave form of Open-Phase Voltage at Suddenly Line-to-Line Short Circuit of Synchronous Machine.
Investigation on Design of Compact Superconducting Generator.
Electromagnetic Vibration Analysis of Stator Coil End for Turbine Generators.
Loss Analysis of Stator Coil End Short bar of Turbine Generator.
Strand Current Distributions of Turbine Generator Model Coils.
Practical Calculation Method of Armature Strand Current Distributions for Large Turbine Generators.
Development of a Highly Efficient Air-Cooled Turbine Generator with Inner Coolers.
8,880MVA Short Circuit Generator.
The application of direct heat dispassion cooling system to large capacity bulb turbine generators.
159-164.166-169
Characteristics of 6 pole V type IPMSMs with Several Rotor Configurations.
A Sensor-less Drive of IPM Motor with Over-modulation PWM.
Examination of Performance Improvement Brushless DC fan motors.
The comparison of the characteristics in INV drive BLDG motor and Brushed DC motor.
Position Sensor-less Starting and Speed Control Operation of Ultra High Speed Permanent Magnet Synchronous Generator.
A Study on Torque Ripple of Synchronous Reluctance Motor.
Magnetized process after inserting non-magnetized magnets into IPM rotor.
Analysis of a Claw Poled PM Stepping Motor Considering the Magnetizing Process.
Suppression of Rotor Oscillation of a Stepping Motor by Pre-Compensator.
170-176
A control method to change the motor parameters to any value.
A new soft-start method for decreasing the rush current on the induction-generating systems.
Instantaneous Characteristic Measurements of a PWM Inverter Fed 3-Phase Induction Motor.
A guideline for the Design of Sinusoidal Excitation Equipment.
Iron Loss Behavior of Three-Phase Induction Motor under PWM Inverter Driving.
Changes in Motor Losses Due to Core Conditions.
A Study on a Design Method of Small Motors.