Science Links Japan | Papers of Technical Meeting on Rotating Machinery, IEE Japan

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Papers of Technical Meeting on Rotating Machinery, IEE Japan

RM-02

22-30

The Study of Brush Sparking Voltage Generating in Universal Motors.
Considerations for commutation theory by residual current, using commutation testing machine.
An Effect of Surface Film Formation on Electrical Sliding Contacts.
The commutation improvement of the large DC motors for the metal rolling mills.
An analysis of torsional vibration with the backlash.
An Evaluation of Insulation Deterioration by Dust Analysis for Large DC Mill Motor.
An experimental study of impregnation characteristics for aged dc machine to extend its life and feasibility study for application of far infrared radiation for the process.
Low Torque Ripple operation of the switched reluctance motor by PWM drive.
Development of automation system for student training in which motor driven tension control for winding rolled paper is applied.
31-40
Stray Load Loss of Squirrel-cage Induction Motor.
Experimental Study of the Stray Load Loss for Three-Phase Squirre-Cage Induction Motors. Fifth Report. Comparison of the Losses Measured by Four Methods Driven by A Sinusoidal Supply and by A PWM Inverter Supply.
Automatic Parameter Measurement for Surface-Mounted Permanent Magnet Synchronous Motors Compensating Dead-Time Effect.
Effect of Phase Difference on Eddy Current Loss in a Silicon Steel Sheet of Interior Permanent Magnet Motor.
Eddy Current Analysis of Stator Core End of Large 4-pole Turbogenerators.
Analysis of Sudden Three-Phase Short-Circuit Currents and Leakage inductances of a Salient-Pole Synchronous Machine.
Transient stability simulation of wind generator Including output control system.
A Consideration on the Characteristics of d and q Axes Parameters of Synchronous Machines. Part 2.
Determination of Direct and Quadrature axes Inductances of Synchronous Reluctance Motors Taking into account Cross Saturation.
Torque Ripple Reduction of SRM by Multi-Level Drive Circuit.
41-51
The Efficiency Improvement of SRM with High Silicon Steel 10EX900.
Calculation Accuracy of Magnetizing Curves of SRM Based on Simple Non-linear Magnetic Analysis Considering Leakage Flux in End Region of Motors.
Reluctance Torque Assisted Motors in Paper title.
A Simple Method for Evaluating the Iron Loss of Rotating Electrical Machine with Static Electromagnetic Field Analysis.
Neutral Point Signal Characteristics of IPMSM.
Improvement of Radial Force and Torque Ripple for IPMSM with Concentrated Winding.
High Efficiency Control for IPMSM Drive System using Adjustable DC Bus Voltage Inverter.
Rotor Position Sensorless using Neutral Point Signal of IPMSM.
Improvement of Accuracy of Position Sensorless Control of IPM Motor Using PWM Inverter Carrier Frequency Component.
Performance of Switched Reluctance Motor by Changing Excitation Angle.
A electric controller for switched reluctance motor.
52-57
SynRM Modeling on PSIM and its Control Simulation.
Computation of Instantaneous Torque from Stator Voltages and Currents of a Permanent Magnet Synchronous Motor during Starting.
A study on improvement in efficiency of skeleton type single phase PM motor.
Improvement of Driving Characteristic of a Stepping Motor by Adjustment of Command Pulse Train.
Study on Various Characteristics of Synchronous Induction Motors.
Investigation for Practical Use of Half-Pitch Capacitor Induction Motor with the Stator-Core Adopted the Method to Divide into Same Number of the Teeth as Number.
94-107
An Optimal Ventilation System Using Fuzzy Control for an Underground Parking Lot.
Experimental investigation on efficiency of multi-phase stepping motors.
The Effect of Manufacturing of Core Materials on the Performance of Rotating Machines.
Analysis of a parametric induction motor using reluctance network model. 4th report.
A New Control Method of BLDCM Based on Internal Model Principle.
Considerations in distribution of flux density inside brushless DC motor using RNA (Reluctance Network Analysis).
Investigation on Single Phase Brushless Motors Collecting Magnetic Flux with Inductors.
The influence of seasonal deformation of foundation on guide-bearing of hydropower generator in underground plant.
Performance Prediction of a Hybrid Excitation Type Synchronous Machine with a Rotor Axially Divided into Two Parts.
Performance Calculation of a Permanent-Magnet Induction Generator Taking into Account the Core Loss.
Performance Calculation of a Stand-Alone Permanent-Magnet Induction Generator.
Influence of mutual leakage reactance of salient-pole synchronous machine at sudden three phase short-circuit.
A Consideration on the Characteristics of d and q Axes Parameters of Synchronous Machines. (Part 3).
A Simulation for Transient Stability of Wind Generators. Analysis of the case including multiple generators. Part 2.
108-132
A Method of Low Torque Ripple Operation of Switched Reluctance Motor.
A Study of Sensorless Driving System of SRM Using New Digital Phase Locked Loop.
Consideration on Calculation Method of Iron loss Characteristics of SRM using Simple Magnetic Circuit Model.
High-Efficiency Operation of Vector-Controlled Synchronous Reluctance Motors.
A Fundamental Study of A Linear PM Vernier Motor.
SPM motor simulation using Electro-Magnetic analysis.
Air-gap Flux Analysis of Permanent Magnet Motor.
Magnetic Field Analysis of Interior Permanent Magnet Synchronous Motors.
Initial Rotor Position Estimation of Interior Permanent Magnet Synchronous Motor.
A no-load characteristics calculation method of induction motors taking magnetic saturation of core into account.
Adaptive Parameters Identification with Magnetizing Current and Rotor Flux Observer for Field-Oriented Induction Mtor Drive.
A Basic Experiment of the Electromagnetic Vibration Caused by Time-harmonic Voltage for A Three-Phase Squirrel-Cage Induction Motor under Loaded Condition.
Experimental Investigation of Vibration and Noise in a PWM Inverter-Fed Induction Motor.
Simulation of Space Flux Distribution of Induction Motor.
Effect of the Stray Load Loss on the Performance Calculation of Three-Phase Squirrel-Cage Induction Motors.
A Study on Calculation of Stray Load Loss of Induction Motor Using Finite Element Method.
Negative Torque of Induction Motors Caused by Harmonic Fields. Part II: Experimental and Calculated Results at Load Condition.
The Measuring Results of Magnetic Saturation Effects in Synchronous Machine Using AC/DC Power System Simulator.
The Distribution of the Rotating Magnetic Field in the Synchronous Machine Stator Yoke Part.
Calculation of Sudden Three-Phase Short-Circuit Current of Turbine Generator by 3D Magnetic Field Analysis.
Development of a Calculation Program for Evaluation of the Stator Core End Design of Air Cooled Turbine Generators.
Performance Evaluation of a Turbine Generator through a Thorough Measurement on the Actual 250MVA Class Machine.
Performance Assessment Study of 250MVA Air-cooled Turbo Generator.
A Maximum Capacity Analysis for Large Turbine Generators Considering Temperature Limitation.
Development of Large Capacity Hydrogen Cooled Turbine Generator.
133-144
Characteristic Analysis of IPMSM considering Air Layers on Magnet Circumference and Magnet Temperature.
Characteristics of 8 pole 12 slot IPMSM with Concentrated Winding due to Stator and Rotor Configurations.
Experiment and Analysis of Eddy Current Loss in Permanent Magnet under Alternating Magnetic Field.
Electromagnetic Force Analysis of DC Motors Taking Commutation Characteristics into Account.
Performances Comparison of Various Generating System Using Permanent Magnet Synchronous Generator.
Design of Blushless DC Motor using PC-BDC.
Effects of Additional Harmonic Component in Magnetization Condition on Rotational Iron Loss of Non oriented Electrical Steel.
The Selection and Usage of Core Materials for Small Motor Design.
Position Sensorless Control of SynRM and Starting Characteristic.
Torque Control at Sensor-less Drive of IPM Motor.
145-150
A Study on Magnetic Circuit Optimal Design of Interior Permanent Magnet Synchronous Motor.
Downsizing and high efficiency of Brushless DC Motors
Efficient-ized technology of Brushless DC Motor.
Activity Survey of Optimal Design Methods for Small Motors.
Dvelopment of Sensorless Techniques for Motor Drive Systems.
Trend of Control Techniques of Stepping Motors.