Science Links Japan | Papers of Technical Meeting on Magnetics, IEE Japan

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Papers of Technical Meeting on Magnetics, IEE Japan

MAG-01

1-2.4-12

Consideration of the method to reduce the static error of 2X-VR type Resolver.
Radio communication system using magnetic flux signal.
Effect of Magnetic Field Distribution on the Impedance in a Coupled Magnetic Ribbon Structure.
Alignment method of the output voltage using the linear function in GMR line-sensor.
Relationship between the exitation frequency and the imaging property of a Dahle-type probe.
Consideration and observation of magnetic field distribution in two dimensions at Magnetic Flux CT.
Development of Eddy Current Testing Probe suited to diagnosis of Crack using Magnetic Field Numerical Analysis.
Selective Reflection of Electromagnetic Fields Based on a Biomechanism.
Magnetic shielding transformer using bulk high Tc Superconductor.
Effect of Laser Irradiation on the Magnetostriction of Grain-Oriented Electrical Steels.
Effect of Co addition on the magnetic properties of nanocrystalline Fe-Rich Fe-Nb-(Nd,Pr)-B alloys produced by crystallization of an amorphous phase.
13-23
Dependence of PTFE Dry Etching Using Synchrotron Radiation Light on Process Conditions.
Fabrication of Three-Dimensional Microstructures By Plane-Pattern to Cross-Section Transfer(PCT) Technique Using SR light.
Deflection analysis of thin-film vacuum chamber deformed by the atmospheric pressure for polysilicon vibrating gyroscopes.
An Air flow Sensor Modeled on Wind Receptor Hairs of Insects.
Ultrasonic micro-degassing device.
Synthesis and magnetic properties of carbonaceous magnetic materials made from triethylamine.
Low temperature fabrication methods of ferrite.
Permeability Characteristics of Highly Resistive (CoFeB)-(SiO2) Films.
Microfabrication of sandwich type RF integrated inductors for Q=25 at 2GHz.
Application to the smart actuator of the strain sensor by magneto-elastic effect.
Evaluation of the Bending Fatigue of Using Residual Magnetization Method with Thin-Film Flux-gate magnetometer.
24-35
Some Magnetic Properties of Amorphous and Nanocrystalline Fe-Based Alloys.
Investigation on Process of Reducing Permeability of Fe-Cu-Nb-Si-B Ribbons by Creep-Induced Magnetic Anisotropy.
Spin-dependent single electron tunneling in microfabricated insulating granular films.
Electromagnetic Wave Absorption Properties of Iron Nano-Particles formed by a Disproportionation Reaction in Sm2Fe17 Compounds.
Dielectric Constant Changes with Magnetic Field in Amorphous Ferromagnetic Oxide Films.
Formation and Magneto-optical Effect of Epitaxial Semiconductor-based Magneto-photonic Crystal.
Electrochemical Process for Preparing Iron Oxide Nano-scaled Magnetic Composite Film.
Room temperature synthesis of spinel ferrites particles.
Preparation of Hexaferrite Thin Films by Chelete Ferrite Plating and Annealing Process.
Magnetic Encoder disk with Rare Earth Magnet.
Synthesis and Magnetic anisotropy evaluation of Co, Co-Pt fine particles.
Formation of nano-scale magnetic structures by oblique sputtering and their application to TMR elements.
43-47
A Read/Write Experiment without Multiple Pulses of Phase Change Optical Disk at High Transfer Rate.
A PRML Channel for a high-transfer-rate optical disk.
Performance Evaluation of PRML Systems for Advanced Optical Disks.
Asymmetrical DC control code for optical disks.
Product code interleaved in each row for optical disks.
48-54
Method of Test and Evaluation of Saturation Field for Permanent Magnet Materials.
Experimental Results of Saturating Field for Nd-Fe-B Sintered Magnets.
Magnetizing Behavior of Nd-Fe-B and Sm-Fe-N Bonded Magnets.
Magnetization behavior of Sm-Co sintered magnets.
Investigation of High-performance Small Permanent Magnet Motors.
Investigation of Large Permanent Magnet Motors.
55-64
Evaluation of Nuclear Reactor Pressure Vessel Integrity by Magnetic Interrogation and Problems of Relevant Magnetic Field Analysis.
Development of Eddy Current Testing Probe that have uniform eddy current by numerical analysis and diagnosis of cracks.
Methods of analysis for magnetic sensor.
Modeling of Two-Dimensional(Vector) Magnetic Property.
A Convergence Characteristic of Nonlinear Magnetic Field Analysis Taking Account of the 2-D Magnetization Property.
Power Loss in Ferrite Cores under Magnetic DC-Biased Condition.
Problems in Application of Magnetic Properties of Core Materials to Core Characteristics Analysis.
Proposal of Representation and Evaluation for Magnetic Materials.
Fabrication and characteristic of coplanar type RF integrated inductor.
Common-Mode Noise reduction in Active-Clamped DC-DC Converters.
65-71
Detection of Deterioration in a Distribution Line by Evaluation of Magnetic Field Distribution.
High Spatial Resolution Identification of Current Distribution on Printed Circuit Board and Its Experimental Examination.
Present Status of the Analysis of Electrical Appliances Using a Parametric Oscillation.
Analysis of a parametric induction motor using reluctance network model.
A Study of Electromagnetic Field Analysis.
Consideration on the Electromagnetic Field Visualization Methodologies.
Summary of methodologies for electromagnetic devices analysis. Constitutive Equation of magnetization characteristics.
72-82
Electrophoresis with Magnetically Ordered Agarose Gel.
Vortex- and Ordering-patterns of Cell Assembly under Strong Magnetic Fields.
Magnetically Disturbance of Immobilized-Enzyme-Activity on a platinum-black Electrode.-Difference between Catalase and Peroxidase.
Mutagenicity of extremely low frequency magnetic fields(ELF-MF) and its mechanisms.
Experimental study on variation of temperature in the strong magnetic field.
Investigation of a Jaw Tracking Device Using Super-Sensitive Magnetic Field Sensors.
Analysis of a parametric induction motor using reluctance network model-second report.
Construction and Responsive Characteristics of Thermal Biosensor Utilizing Temperature-Sensitive Magnetic Film.
Experimental results on environment of Powder-Type Magnetic Wood(1).
Characteristic of the signal transmission coil for high frequency magnetic telemetry system.
Fundamental examination regarding the contactless drive of SMA for the artificial sphincter.
83-93
A Method of Measurement of Magnetic Properties of Stress-Loaded Silicon Steel Sheets.
Study on the Single Sheet Magnetic Measurement Method with Consideration to Transient Phenomenon.
The Measurement of Magnetostriction of Silicon Steel Sheet by Laser Displacement Meter.
Effect of Flux Waveform Distortion on Magnetic Testing of Electrical Steel Sheet.
Iron Loss Characteristics of The Amorphous Magnetic Material under the Distorted Wave Magnetic Flux.
Influence of Primary and Secondary Condition over Magnetization of Transformer core.
Relationship between Magnetostriction and Vibration of Transformer Core.
Magnetic Properties of Grain-Oriented Magnetic Steel Sheets under Temperature Distribution.
Fine-Grained Doubly-Oriented Silicon Steel Sheets and Their Magnetic Properties (No.2).
Effect of coating amount on the properties of insulating coating of non-oriented electrical steel sheets.
Furequency Dependence Characteristic of Rotating Barkhausen noise.
94-99
Microstructure at as-Quenched State and Soft Magnetic Properties at Nanocrystallized State of Fe-Zr-Nb-B Alloys.
Effect of P Additions of Nanocrystalline Soft Magnetic Fe-Nb-B Alloys Produced in Air.
Investigation on Magnetic Properties of Creep-Induced Fe-based Cores with Low Permeability.
Magnetic properties of MnZn ferrite films prepared by low temperature process using PLD method.
Physical Properties of Ferromagnetic Shape Memory Alloy Ni2MnGa.
A simulation of magnetic and non-magnetic powder material by using a magnetic separator.
100-112
Characteristics of Iron loss of Switched Reluctance Motor.
A Novel High Power Factor Converter Using a Coupled Inductor.
Performance Analysis of Blushless DC Motor uding RNA Method.
Relation between the Pole Pitch and the Motor Characteristics of the Linear Parametric Motor with Double Driving Surfaces.
Experimental Study on the Relation between the Pole Arrangement and the Fundamental Characteristic in a Laminated Core-Type Parametric Motor.
A Consideration of Core Temperature Analysis of Ferrite Orthogonal-Core for High Frequency Region.
Application of ECT probe for inspection of a PCB considering the tangential component.
Consideration of Current Distribution Estimation on Printed Circuit Boards.
Real-time motion tracking system in three dimensional space using two uniform magnetic fields and a gradient magnetic field.
Characteristic and design of magnetic AC marker for motion capture system.
3D-Motion Capture System Using Magnetic Markers.
A Magnetic Fluid Actuator for an Artificial Heart.
Development of Active Noise Control System for Biomagnetic Measurements. (II).
113-124
Optimum Configuration of Winding Conductors in Inductors Using Bar-Core.
The circuit pattern influence of Flexible-Micro-Transformer on transmission characteristic.
Analysis of Over-current Detection using Magnetic Saturation of Planar Inductor.
Fabrication of Two-Dimensional Magnetophotonic Crystals.
Orthogonal fluxgate mechanism operated with dc biased excitation.
Magnetic Domain Imaging in Coated Silicon Steel Using Micro Fluxgate Sensor.
Fabrication and Characterization of Hybrid material composed of Mn-Zn Ferrite particle and Polyimide.
LPE garnet base magneto-optic spatial light modulators.
Transmission characteristic of CoZrNb/Polyimide Multilayered Microstrip-line at Vicinity of Ferromagnetic Resonance Frequency.
Shape and characteristic of functional magnetic thin film device.
Study on the Structure of Magnetic Head for Torque Sensors.
In vitro study for pulsed magnetic field effects on anticancer drugs potency.
125-134
A Simple Analysis Model for Influence of Core Material on the Performance of a Brushless DC Motor.
Fe-Nb-B Based Nanocrystalline Alloy with High Bs and Low Core Loss for Pole Transformers.
Measuring system for two dimensional magnetic properties of magnetic steel sheets.
Footmark on Researches and Developments of Hot-Rolled Silicon Steel Sheets in Japan.
Magnetic properties of Amorphous powder cores produced by cold-pressing method.
Cross measurements of thin-film permeability up to 3GHz.
Magnetic properties and galvanomagnetic effects in alternate evaporated Co-Bi films.
Magnetization of Fe-SiO2 multilayers.
Spin dependent tunneling magnetresistance in Co-SiO2 granular ultrathin films.
Fabrication of Metal Oxide Granular Films by Metal-Oxide Co-electrodeposition Method.
135.137-146
Observation of nanoscale magnetic particles by scanning probe microscope.
Magnetic Properties of FeRh Alloy Films Prepared by Ion Beam Sputtering.
Effects of third elements (Ag, B, and Ir) additives on the ordering of FePt films.
TMR of spin tunneling double junctions.
Magnetic memory based on planer-type double ferromagnetic tunnel junctions.
Preparation of High Resistivity and Low Coercive Force Magnetite Films by Chemical Reaction from an Aqueous Solution.
Application of micro-machine by ferrite plating technique.
Low temperature (3-25.DEG.C.) synthesis of ferrites fine particles and its bio-application.
Annealing effect in iron oxide films prepared by gel-coating.
Dynamic switching testing of LPE base reflective magneto-optic spatial light modulator.
Application and Properties of Reflection type One-dimensional Magnetophotonic Crystals for Use in Optical Isolators.
147-157
Characteristic Analysis of A Phase Converter Using Shading Coil Effect.
Performance Analysis of a Flux-Concentration Type Linear Induction Motor Using Three-Phase Equivalent Circuit.
Configuration of the outer rotor of a small-sized repulsive type magnetic bearing and its operation.
High performance bench-top cylindrical magnetic shield with magnetic shaking enhancement.
Study of geomagnetism and past-lightning by the rockmagnetic method.
Controllability of Power Systems Voltage Control by Using a Magnetic Flux Control Variable Reactor.
Development of a Magnetic Flux Controlled-Type Spot-Welding Machine.
Characteristics of magnetic field due to movement of object composed of magnetic materials for measuring apparatus of weak magnetic field. No.1. Magnetic field fluctuation due to automobile movement.
Relation between the stator form and the characteristics of a Laminated Core-Type Parametoric Motor.
Stabilization of the parametric oscillation in a single-phase-input three-phase parametric motor.
A Development of Electric Power Generating System for Medical Implants in a Deep Position by Using Magnetic Coupling.
158-169
The measurement method of the flux density distribution in Torus Induction Machine.
3-D Finite Element Analysis of a Linear Induction Motor with Two Armatures.
Wavelet Magnetic Field Analysis of Finite Linear Induction Motors.
Utilization methodology of the Java platform Application Programming Interface for numerical simulation environment of linear-drive systems.
A Method of Designing Metal Magnets for an Artificial Heart Driver.
Fundamental Characteristics of X-Y Linear Synchronous Motor(X-Y LSM).
The Fundamental Investigation of Magnetic Levitation System of an X-Y LSM.
Investigation of an X-Y LIM Design Approach with respect to Iron Core Shape.
Fault Diagnosis for Short Circuit Using Voltage Ratio in Linear Induction Motor System.
Optimal Design of Linear Oscillatory Actuator with Active Vibration Absorber.
A study on characteristics of the thrusting force of a magnetic levitation type linear induction motor excited by two-phase AC voltage source.
Optimal servo synthesis and mass evaluation for the repulsive type balance magnetic levitation system.
170-182
Magnetic Properties of Bulk Magnets Using M-Type Ferrite Fine Particles. Hot-Press Method and SPS Method.
Magnetic Properties of TbCu7-Type Sm-Fe-W System Nitriding Compounds and These Bonded Magnets.
A Study of the Origin of the Coercivity Enhancement in the Sm2Fe17N3 Magnetic Particles Reacted with Zn Metal Powder.
15MGOe class SmFeN compound for injection molding magnets.
Development of Durable Rare Earth Bonded Magnet from Nd-Fe-B Type Powders with Zinc Metal Coating by Sorption Method.
The effect of the solidification rate on the microstructure of Nd-Fe-B alloys.
Effect of high-speed crystallization in PrFeB exchange-spring magnets.
Structures and magnetic properties of low rare-earth composition bulk exchange-spring magnets.
Improvement of Recyclability with Liquid-Phase Pyrolysis for Isotropic Nd-Fe-B Epoxy-Resin Bonded Magnets.
Magnetic properties of Nd-Fe-B thick film magnets prepared using high deposition rate.
3 Tesla Multi-Pole Wiggler.
Demagnetization of Interior Permanent Magnet Synchronous Motor.
Vibration of Actuator for Security Video Camera.
183-189
Thrust of a Water-beetle Type Magnetic Micro-machine.
Carrying Test of a Bending-type Magnetic Micro-machine.
Velocity Characteristics of a Swimming Actuator toward the Magnetic Field.
Basic properties of an implantable micro-pump driven by external magnetic fields.
Application of Magnetic Micro-Machine for Hyperthermia.
Individual Control of Magnetic Micro-Machine.
Analysis of swimming properties of the miniature magnetic micromachine.
190-199
Analysis of Copper Losses of Flyback Transformers using Litz Wire.
Gradual Decrease Phenomenon of Electric Resistivity in Water Triggered with Milli Gauss Low Frequency Magnetic Field and Bioeffect in Phosphate Buffered Saline Solution.
Noise Characteristics of Twisted Pair Cables covered with Magnetic ribbon.
High Sensitivity TMR Composition Films which used Obliquely Sputtering.
A resolution of high frequency carrier type thin film magnetic field sensor with carrier suppresing circuit.
Magnetic Sensors for Automobile.
Consideration to make force sensor using giant magnetostrictive thin film high sensitivity.
Omni-directional GMR element and suggestion of its application for leakage flux testing.
Nondestructive Testing Method for Steel by Magnetic Measurement.
Gamma-ray Irradiation Tests of High-Tc SQUID.
200-209
Present Stage of Ribbon Materials for Power Applications.
Legislation and Standard for Utilization of Mgnetic Material and Equipment.
"Eco-Technology" for Magnetic Material and Equipment.
Development trend of electric machines.
Measurement Methods of Magnetostrictions of Electrical Steel Sheets.
Measurement Methods of 2-D Magnetic properties of Electrical Steel Sheets.
210-218.221-223
Operating principle of non-contact magnetostrictive torque sensor with knurls.
Improved Magnetic Head for Torque Sensors.
Magnetic Near Field Probe Based on High Frequency Carrier Type Thin-film Magnetic Field Sensor.
The Vector Current Viewer For Electric Current Visualization.
A Method of Frequency Classified Currents Estimation on Multi-Layered Circuit Board.
Detection Resolution of Magnetic Field Control-Type Current Sensors.
Float Type Tilt Angle Sensor Using Magnetic Fluid.
Flaw detection from ferromagnetic metal using a Dahle-type probe with orthogonal fluxgate pick up one word.
Fabrication of a multi-channel micro magnetic probe.
Resistance Tomography By Generalized Vector Sampled Pattern Matching Method.
A Proposal of Dynamic Image Cognition Methodology And Its Application to Nondestructive Inspection of Electromagnetic Devices.
Electromagnetic Field Source Searching from Electric Field Measurement Using EO Probe.
224-241
Heat Treatment in a Magnetic Field of Co-base Amorphous Ribbons for Applying Magnetic Shield.
Fabrication of the filter circuit with magnetic micro-strip lines.
A Basic Study for Analysis of Magnetic Domains in Electromagnetic Steel Sheets.
Consideration of parameter measurements for Chua type magnetization model.
A Method for Nonlinear Magnetic Field Analysis Taking Account of the 2-D Magnetization Property. Factors Affecting Accuracy of Analysis and Convergence Characteristics.
On A Relation between Magnetic Core loss and its Biased Field.
Magnetization Characteristic Measurement of Thin Magnetic Films by Compensation Coil Method. Experimental Study of Optimal Exciting and Compensation Coil Lengths.
Introduction and Application of Linear Variable inductor for Electric Power System.
Dynamic Analysis of Permanent-magnet Motor using Magnetic Circuit Network.
Analysis of SRM Considered with Nonlinear Magnetic Characteristics.
Relation between the Magnetic Anisotropy of a Stator Core and the Peformance Characteristics in a Laminated Core-Type Parametric Motor.
Analysis of a parametric induction motor using reluctance network model. Third report.
Analysis of Magnetic Field due to a Elliptic Coil.
A Motion Capturing System of Jaw Movement Using Two Magnets.
A Novel Battery Cell Balancing Circuit for Electric Vehicles.
Distribution of Magnetic Field in a Cylindrical Magnetic Shield with Open-ends and Considerations on Compensation Coils.
Dynamic Characteristics of a Magnetic Flux Controlled-Type Spot-Welding Machine.
Consideration on the Design Method of a Linear Parametric Motor with Open Magnetic Circuit.
242-261
Mutagenicity of Static and ELF Magnetic Fields.
Cellular and Molecular Mechanisms of Extremely Low Frequency Electro-magnetic Fields.
Exposure of C. elegans to Extremely Low Frequency High Magnetic Fields Induces Stress Responses.
Biological Effects of power-frequency electromagnetic fields. Evaluation from epidemiological study and animal experiments.
Biological Effects of Radiofrequency Magnetic Fields.
Magnetic orientation and cellular engineering.
Applications of Magnetic Bacteria in Biotechnology.
Magnetic Orientation for Physical Chemistry.
The Challenge of MRI.
Magnetic Technology in the Dental Field. Application of the MI Sensor to a Jaw-Tracking Device.
Implantable Devices and Magnetic support technology.
Medical applications of magnetic stimulation.
Biomagnetic field measurements and applications using a micro-SQUID magnetometer.
3-D measurements and medical applications of the biomagnetism.
Clinical Application of Magnetoencephalography.
Biomagnetic measurements; MEG and MCG, and Source Localization.
Source Analysis of MEG Responses Related to Higher Brain Functions.
Methods of Electromagnetic Field Analysis And Aided Technologies for Medical Treatments.
The future of biomagnetics.