|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Quarterly Journal of the Japan Welding Society
18
- Effects of Fabricating Method and Chemical Compositions of Al-Clad Materials on Formation of Intermetallic Phases. Development of Clad Materials by Vacuum Roll Bonding and its Characteristics. (Report 3).
- Effects of Solidification and Wetting on Flattening Behavior of Thermal Sprayed Ceramic Particles.
- Study on Gas Metal Arc Welding Procedure of Stainless Steel.
- Investigation on TIG Welding Using 2 Filler Wires with Electromagnetically Controlled Molten Pool Process in Horizontal Position.
- Measurement of Groove and Weld Bead Shape by Spot Laser Sensor.
- Characteristics of Reheat Cracking in Weld Metal. Study of Reheat Cracking in FCAW Stainless Steel Weld Metal. (Report 1).
- Evaluation for High Temperature Ductility in Weld Metal with Creep Rupture Test. Study of Reheat Cracking in FCAW Stainless Steel Weld Metal. (Report 2).
- Evaluation for High Temperature Ductility in Weld Metal with Constant Speed Tensile Test. Study of Reheat Cracking in FCAW Stainless Steel Weld Metal. (Report 3).
- Evaluation for Reheat Cracking Sensitivity of Weld Metal with Constant Load Tensile Test using Notched Specimen. Study of Reheat Cracking in FCAW Stainless Steel Weld Metal. (Report 4).
- Metallurgical Characteristics of Laser Weld Metal for Heavy Plates.
- Theoretical Analysis of Grain Boundary Liquation at HAZ of Inconel 718 Alloy. A Study on Laser Weldability of Ni-base Superalloys. (Report 3).
- Analysis on Grain Boundary Liquation Phenomenon using Two Dimensional Grain Boundary Liquation Model. A Study on Laser Weldability of Ni-base Superalloys. (Report 4).
- Study of Practical Use of Welding Consumables for Steel of Hot Dip Galvanizing Bath.
- Structure and Phases in Nickel-Base Self Fluxing Alloy Coating.
- Effect of Bonding Misfit on Mechanical Properties of TLP-Bonded Joints at Elevated Temperature. Transient Liquid Phase Bonding of Ni-Base Single Crystal Supealloy. (Report 7).
- Fatigue Strength Improvement of Box Welded Joints by Using Low Transformation Temperature Welding Material.
- Evaluation Method for Sensitivity of Electrochemical Migration by Quantity of Electricity for Electrochemical Reaction in Water Drop Test.
2
- Application of Neural Networks to Modeling Cut Surface Quality for Plasma Arc Cutting.
- Reaction Mechanism between Ti and Ni on Brazing Process.
- Effect of Aluminum Content on Penetration Shape of Stainless Steel in TIG Arc Welding. Effect of Chemical Compositions on Weldability in Fabrication in High Alloyed Steel (Report III).
- Relationship Between Welding Position and Proper Welding Parameters in All Position Electron Beam Welding. Study on A11 Position Electron Beam Welding of Large Diameter Pipeline Joints (Report 1).
- All Position Continuous Electron Beam Welding of Horizontally Fixed Heavy Sectioned Pipe. Study on All Position Electron Beam Welding of Large Diameter Pipeline Joints (Report 2).
- GHTA Welding Experiments under Simulated Space Environment in Flying Laboratory.
- The Erosion Phenomena of Silicon Nitride at The Brazed Interface.
- Porosity Formation Mechanism and Suppression Procedure in Laser Welding of Aluminum Alloy.
- Effect of Oxygen Content in Copper on Diffusion Bonding Joint of Copper to Molybdenum.
- Investigation of Flattening Behavior of Thermal Sprayed Particle Based on Measured Data.
- Fundamental Characteristics of GHTA under Low Pressure.
- Bondability Between Various Titanium Alloys and Cemented Carbide During Cutting Process. Study on the Adhesion Mechanism During Machining Process (Report 1).
- Active Control of Welding Parameters in Deviating Weld Groove. Automatic Control System for 3-electrode One-side Submerged Arc Welding with Flux Copper Backing (Report 1).
- Practical Development of Fully Automated Welding System. Automatic Control System for 3-electrode One-side Submerged Arc Welding with Flux Copper Backing (Report 2).
- Bead Shape Control Systems for Butt Joints of Aluminium Alloy.
- Effect of Oxygen on Shape Recovery and Tensile Properties of Ti-Ni Alloy Weldments. GTA Welding of Ti-Ni Shape Memory Alloy (Report 1).
- Effect of Nitrogen on Shape Recovery and Tensile Properties of Ti-Ni Alloy Weldments. GTA Welding of Ti-Ni Shape Memory Alloy (Report 2).
- Effect of Misorientation Angle at Bonded Interface on Diffusion Bonding Joints Using Oxygen Free High Conductor Copper.
3
- Effect of Gravity on Arc Shape in GTA Welding.
- Friction Welding of Aluminum and Plain Low Carbon Steel.
- Thermohydrodynamics Analysis on Mechanism of Bump Formation in Laser Texturing.
- Effect of Gas Flow Rate on Shapes of Weld Bead Sections. Study on High Speed Surface Treatment by Arc with Laser. (2nd Report).
- Investigation of Transition Phenomenon in Flattening of Thermal Sprayed Particle According to Substrate Temperature Change.
- Influence of Impurity Elements to Hot Crack Occurrence in Electron Beam Welding of Pipeline Steel. Study on all position electron beam welding of large diameter pipeline joints. (Report 3).
- A Compact High Frequency Oscillation Device with Electromagnetic Force and Bead Formation. Development of High Frequency Oscillating arc. (Report I).
- Change in Microstructures of Weld Metal During Isothermal Process. Study of Reheat Cracking in FCAW Stainless Steel Weld Metal. (Report 5).
- The Study of Prevention of Solidification Cracking in Laser Weld Metal of Al-Mg-Si Alloy. CO2 Laser Welding of Al-Mg-Si Alloy. (Report 1).
- The Study of The Aging Treatment to Laser Weld Parts of Al-Mg-Si Alloy. CO2 Laser Welding of Al-Mg-Si Alloy. (Report 2).
- Evaluation of Hot-Cracking Susceptibility by Miniature Spot-Varestraint Testing. Repair Weld Cracking of Long Term Exposed HP-Modified Heat-Resisting Cast Alloys. (Report 1).
- Changes in Microstructure of HP-Modified Heat-Resisting Cast Alloys with Long Term Aging. Repair Weld Cracking of Long Term Exposed HP-Modified Heat-Resisting Cast Alloys. (Report 2).
- Growth Feature of Crystals in Aluminum and Aluminum Alloy Welded with Laser.
- Interlayer Materials for Diffusion Bonding of Bi2Sr2Ca2Cu3Ox Superconducting Wire.
- Formation of p-n Junction by Diffusion Bonding.
- Study of Tendon Force Generating in Welded Joint.
- Crack-Tip Stress Field Measured by Infrared Thermography and Fracture Strength in Bonded Dissimilar Plate.
- Microstructure and Toughness of 950 MPa High Strength Weld Metals.
4
- Experimental Research of Micro-Arc Discharge Phenomena.
- Study on Cracking in Electron Beam Welding of A6061 (Al-Si-Mg alloy).
- A Mathematical Modeling of MAG Welding.
- Control of TIG Arc with Scanning CO2 Laser Beam. Study on High Speed Surface Treatment by Arc with Laser. (3rd Report).
- Modeling of Heat and Fluid Flow in Weld Pool by Stationary Gas Tungsten Arc. Analytical Study of Penetration Process in GTA Welding. (1).
- Imaging Method with Separated Fields of Vision for High Accurate Visual Sensing.
- Study on High Speed Fillet Welding by Tandem Arc MAG Process.
- Removing of Surface Oxide Film of SUS316 and Improvement of Diffusion-Bondability of A6061 Aluminum Alloy to SUS316 Stainless Steel using Surface-Activated Pre-Coating Technique. Study on Diffusion Bonding of Aluminum Alloy to Stainless Steel. (Report 3).
- Joining of An Iron Pipe to An Aluminum Pipe by Zinc Plating.
- Effects of Interfacial Phases on Bond Strength of Diffusion-Bonded Joints of Al-X Binary Alloys (X=Mg, Si, Mn, Zn, Cu). Diffusion-Bonding Mechanism of Al Alloys by Transmission Electron Microscopy. (Report 6).
- Mechanism of Hot Cracking in HAZ of Repair Weldments. Repair Weld Cracking of Long Term Exposed HP-Modified Heat-Resisting Cast Alloys. (Report 3).
- TEM Observation of Corrosion Layer in Au-Al Bond Encapsulated in Mold Resin.
- Weldability of Neutron-Irradiated Stainless Steel and Nickel-Base Alloy.
- A Study of Stress-strain, Acoustic Wavevelocity and Hardness Distributions Across Joint Interface of Pure Ti/Pure Al Friction Weld Joint.
- Fatigue Strength Improvement of Box Section Member by Using Low Transformation Temperature Welding Material.
- Fatigue Crack Propagation of Mash Seam Welded Joints.
- Proposal of Evaluation of Fracture Toughness Deterioration of Pressure Vessels in Service Using Small-Size Specimens.
- The Hot Zone Phenomenon Which Occurs in The Electric Circuit.
- Production of Composite Materials Consisting of Hard Materials and Copper Using Hot Isostatic Pressing.
- Characteristics of Plume Sound in Nd:YAG Laser Drilling.
- Difference between Deformation of Cutting and One of Edge Welding.
1
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
