Science Links Japan | Quarterly Journal of the Japan Welding Society

List of Jounal Titles

A to Z index of Journal Title. Choose a letter.

A/ B/ C/ D/ E/ F/ G/ H/ I/ J/ K/ L/ M/ N/ O/ P/ Q/ R/ S/ T/ U/ V/ W/ X/ Y/ Z/ 0/ 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9

Quarterly Journal of the Japan Welding Society

Examination of Melting Characteristics of Pure Titanium and Welding Procedure Conditions. Welding of Pure Titanium and Joint Performance. Report 1.
Inspection of Weld Zone and Joint Performance. Welding of Pure Titanium and Joint Performance. Report 2.
Effects of Electrode Tip Shape and Torch Angle on High Speed DCEN TIG Welding.
TIG Arc Behavior and Reasonable Spot of Laser Beam. Study on High Speed Surface Treatment by Arc with Laser. 5th Report.
Fundamental Characteristics of Hollow Cathode Arc Welding.
Wire Melting Behavior by Non-Steady Heat Conduction Numerical Analysis in Gas Metal Arc Welding. Development of Ultra-Narrow Gap GMA Welding Process. Report 2.
Formalism of Modified Embedded Atom Method in Application to Dimer Systems. Fundamental Study of Applicability of Modified Embedded Atom Method to Joining and Adhesion Problems. Report 1.
Prediction of Austenite Phase Fraction in Duplex Stainless Steel Weld Metals.
Effect of Rare Earth Metal Addition on HAZ Cracking Susceptibility. Study on Weldability of Cast Alloy 718. Report 7.
Underlying Mechanism in the Improvement of HAZ Cracking Susceptibility by Rare Earth Metal Addition. Study on Weldability of Cast Alloy 718. Report 8.
Suppression of Blowhole in High Nitrogen-bearing Stainless Steel Weld Metal and Evaluation of its Solidification Mode and Pitting Corrosion Resistance. Study on Properties of Welded Joints for High Nitrogen-bearing Stainless Steels. 1st report.
Nitride Precipitation Behavior of High Nitrogen-bearing Stainless Steel HAZ and its Corrosion Resistance. Study on Properties of Welded Joints for High Nitrogen bearing Stainless Steels. 2nd report.
Characteristics of Welds of High Strength Steel Sheets with Ultra-fine Grained Microstructure Welded by Resistance Spot Heating Method.
The Influences of Al and V in Titanium Alloys on the Bondability of Diffusion Bonding of Molybdenium to Titanium. Diffusion Bonding of Molybdenum to Titanium. Report-2.
Finite-element Stress Response Analysis of Adhesive Scarf Joints of Dissimilar Adherends Subjected to Impact Tensile Loads.
Study on Longitudinal Shrinkage of Bead-On-Plate.
Three-Dimensional Reconstruction System and Its Application to Fracture Surface of Stainless Steel.
Investigation of Microstructure of Thermal Sprayed TiO2 Coating Photocatalyst and Improvement of its Performance by Adsorbent Addition.
2
Effects of Metal Vapor on Plasma State in Helium Gas Tungsten Arcs.
Relationship between Joint Strength and Bonded Area of Numerical Analysis for Diffusion Bonding of Ultra Fine Machined Copper. Study on Diffusion Bonding of Copper. Report 2.
Laser Welding Phenomena of Mild Steel with Oxide Film. Influence of Oxide Film on High Power CO2 Laser Welding of Mild Steel. Report 1.
Observation of Filler Wire Melting Dynamics during CO2 Laser Welding of Aluminum Alloys and Evaluation of Weldability.
Reduction Mechanism of Porosity in Tandem Twin-Spot Laser Welding of Stainless Steel.
GMA Welding Process with Periodically Controlling Shielding Gas Composition. Development of Ultra-Narrow Gap GMA Welding Process. Report 3.
GMA Welding Process with Synchronized Control of Current Waveform and Wire Feed Rate. Developmemt of Ultra-Narrow Gap GMA Welding Process. Report 4.
Statistical Properties of Welding Bead in Butt Welding Joint with Backing Plate.
Effect of Carbon Content and Peritectic Reaction on Hot Cracking of Weld Metal of High Carbon Steel.
Hardness Distribution in Weld Heat Affected Zone of Boron Bearing Low Carbon Steel.
Fatigue Strength Improvement of Non-Load Carrying Type Fillet Welded Joint by The Low-Temperature Transformation Welding Wire.
Examination of the Debonding Behavior of Themal Sprayed Coatings by Local Heating on Substrate Plate. Application of the Laser Speckle Method to Strain Measurement in the Welding Process. Report 4.
A Study on Laser Welding Deformation of 304 Stainless Steel.
A Study of Laser Welding on 304 Stainless Steel Vessel Fabrication.
Effect of Thickness of Nb Intermediate Layer on Friction Weldability of Tungsten to Copper. Friction Welding with an Intermediate Layer of Nb Foil 7-25.MU.m Thick.
Effect of Substrate Surface Condition on Flattening Behavior of Thermal Sprayed Ceramic Particles.
3
Highly Precise Positioning Method by Pull-Up Model Self-Alignment Process Using Liquid Surface Tension.
Scattering Simulation of Fine Particles in Picosecond-Pulse Laser Ablation. Materials Processing Phenomena by Ultrashort-Pulse Laser. (Report 4).
Study on the Dispersion Behavior and Temperature of Spatter caused by CO2 Gas Shielded Arc Welding.
Behavior of Monitoring Signals at the Weld Defect Part in YAG Laser Welding. A Study of the Monitoring for YAG Laser Welding. (Report 2).
Estimation of Arc Length and Wire Extension Using Neural Network.
Mechanical Properties of Lanthanum Containing-Cast Alloy 718 Welds. Study on Weldability of Cast Alloy 718. (Report 9).
Behavior of Deformation in 780MPa Class High Tensile Strength Steel Plate After Prestrain. Studies of Safety Against Fracture on 780MPa Class High Tensile Strength Steel Plate After Prestrain. (Report 1).
Characteristic of Ni Powder by Mechanical Alloying and Application to HVOF Thermal Spraying.
Impact Tensile Properties of Friction Welded Butt Joints between 6061 Aluminum Alloy and SUS 304 Stainless Steel.
Observation of Joining Phenomena in First Phase of Friction Welding. Study of Joining Mechanism of Friction Welding. (Report 1).
Effect of Various Conditions on Friction Torque in the First Phase of Friction Welding. Study of Joining Mechanism of Friction Welding. (Report 2).
Oxidation of HVOF Sprayed 316L Stainless Steel Coatings and Its Control by A Gas Shroud.
4
Melting Characteristics of Various Metals with Combined Lasers of Different Wavelengths.
Behavior of Laser Induced Plasma, Keyhole and Reflected Light during Laser Welding with Superimposed Beams of Different Wavelengths.
Lap Welding Characteristics of Thin Sheet Metals with Combined Laser Beams of Different Wavelengths.
Application of Pulse Modulated High Power YAG Laser to Thick Plate Welding.
High Speed DCEN TIG Welding of Very Thin Aluminium Sheet with Magnetic Control for Arc.
V-I Characteristic of Plasma in the Glow-to-arc Transition.
Feed-Forward Control of Back Bead for Root Gap Variation in V Groove Welding without Backing Plate.
Adaptive Control for Gap Variation in Narrow Robotic Welding.
Microstructures and Mechanical Properties of SUS316 Steel Brazed with Cu-7 mass%P Filler.
Impact Characteristics of Joints of Spheroidal Graphite Cast Irons with Ni-Base Brazing Sheet. Solid State Bonding of Spheroidal Graphite Cast Irons. (Report 9).
Strain Measurement during Welding Procedure. Application of the Laser Speckle Method to Strain Measurement in the Welding Process. (Report 5).
Timesaving Numerical Method of Evaluating Strength of Wide Plate Weld Joints. Numerical Evaluation of Mechanical Properties of Wide Plate Weld Joints. (1).
Simulation of Friction Torque in First Phase of Friction Welding.
Effect of Magnesium on Ultrasonic Weldability of Al-Mg Alloy. Ultrasonic Welding of Al-Mg Alloy. (1st Report).
Relationship between the Friction Time, Friction Torque, and Joint Properties of Friction Welding for the Low Heat Input Friction Welding Method. Study of Joining Mechanism of Friction Welding. (Report 3).