|
List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Quarterly Journal of the Japan Welding Society
21
- Effects of Laser Pulse Energy, Defocus and Twisted Pitch of Bundle on Melting Behavior. Study on Uniform Melting of the Bundle of Cu Wires by YAG Laser. (1st Report).
- Extension of Gap Tolerance in Square Butt Joint Welding with Nd:YAG Laser.
- GHTA Welding Experiments in the Space Station Orbital Pressure.
- Improvement in Reliability of Gas Pressure Welds on Rails.
- Effects of Welding Multiple Heat Cycles on Joint Performance in Beam-to-Column Welded Connection of Steel Framed Structures. Studies on Relation between Joint Performance and Welding Heat Cycles in Welded Joints. (Report 1).
- Analytical Study on Effects of Welding Deposition Sequence on Microstructure and Hardness in Beam-to-Column Welded Connection of Steel Framed Structures. Studies on Relation between Joint Performance and Welding Heat Cycles in Welded Joints. (Report 2).
- Repair of Fatigue Cracks Initiated around Box Weldes by Using Low-Transformation Temperature Welding Material.
- A Method for Improving Strength of Dissimilar Joints with Soft Metal by Cyclic Pre-Loading.
- Improvement of Fatigue Strength of SM490A Welded Joint by High Hardness and Large Specific Gravity Shot Peening.
- Study on Longitudinal Shrinkage and Bending Distortion of Fillet T Joint.
- Improvement in Fatigue Strength of Thermite Welds on Rails.
- Mechanical Properties of Rolled H Section Steel Jointed by Newly Developed Flash Welding System.
- Bonding Mechanism in Roll Bonding of Low Carbon Steel and Aluminium Alloys.
- Relation Between Microstructure and Properties of HVOF Sprayed Cr3C2-NiCr Cermet Coatings.
- The Effect of Additional Elements on the Interfacial Structure and Strength at the Solder Joint between Sn-Ag-X Solder and Electroless Ni-P Plating.
- Positioning Controlled Friction Welding of Carbon Steel.
2
- Effects of Full Annealing Heat Treatment on Long-term Creep Strength of 2.25Cr-1Mo Steel Welded Joint
- Study on Keyhole Behavior in Twin Spot Beam Welding of Aluminum Alloys by Means of X-ray Observation - Study of Twin Spot Nd:YAG Laser Welding of Aluminum Alloys (Rep. 1) -
- Effect of Twin Spot Beam Configuration on Overlap Joints Welding - Study of Twin Spot Nd:YAG Laser Welding of Aluminum Alloys (Rep. 2) -
- Factors affecting flash weldability in high strength steel - Study on toughness improvement of flash welded joint in high strength steel (Report 1) -
- Neural Network Model of Weld Pool in Pulsed MIG Welding
- Workability Evaluation of Welding Works Using Virtual Human Model and Kansei Engineering
- Characteristics of Resistance Spot Welds of Ultra-fine Grained High Strength Steel Sheets
- The Effect of Ultrasonic Vibration on The Mechanical Properties of Austenitic Stainless Steel Weld
- Monte Carlo Simulation for Grain Growth and Recrystallization Behaviors in HAZ of Weldments
- HAZ Properties of Ultra-fine Grained High Strength Steels welded by High Power Laser
- Fracture Toughness Evaluation of Long-Term Used Vessels by Small-Size Specimen with the Local Approach
- Laser Roll Bonding of A5052 Aluminium alloy and SPCC Steel
- Improvement of Ultrasonic Weld Strength for Al-Mg Alloy by Adhesion of Alcohol - Ultrasonic Welding of Al-Mg Alloy (2nd Report) -
- Diffusion Bonding of Tantalum to Titanium
- Friction Welding of Pipe to Plate - Estimate of Heat Input and Comparison with MAG Welding -
3
- Formation of Droplets on Thin Film Surface in Pulsed Laser Deposition Using Metal Targets
- Theoretical Analysis on Temperature Dependence of SHG by Nonlinear Optical Crystal
- GHTA Starting Experiments Using DC High Voltage Process in the ISS Orbital Pressure
- Study of Semi-automatic TIG Welding
- Development of Hot Wire TIG Welding Methods Using Pulsed Current to Heat Filler Wire-Research on Pulse Heated Hot Wire TIG Welding Processes (Report 1)-
- Design of Silicon Nitride and Stainless Steel joint for Airtight Seal Parts
- Formation of Intermetallic Compounds in Friction-Welded Joint of Aluminum Alloys to Copper and its Influence on Joint Efficiency
- Analysis of Bending Deformation Behavior in Cylindrical Parts by Circumferential Welding-Study of Deformation Behavior by Laser Welding in Micron or Sub-Micron Level in Automobile Parts (Report 1)-
- Effect of Weld HAZ Softening on Tensile Strength-Studies on Deformation and Strength in Welded Joints of Fine Grain Steel (Report 1)-
- Prediction of Tensile Strength of Welded Joints for Fine Grain Steel with Softened HAZ-Studies on Deformation and Strength in Welded Joints of Fine Grain Steel (Report 2)-
- Deformation and Ductile Crack Initiation in Weld HAZ Softening Joints-Studies on Deformation and Strength in Welded Joints of Fine Grain Steel (Report 3)-
- Prediction of Static Fracture Strength of Laser Welded Lap Joint by Numerical Analysis
- Mechanical Characteristics of High Power CO2 Laser Welding Joints of Ultra-fine Grained High Strength Steel
- Investigation on Enhancement of Uniform Elongation in 780 MPa Class High Tensile Strength Steel Plate-Studies of Safety Against Fracture on 780 MPa Class High Tensile Strength Steel Plate after Prestrain (Report 2)-
- Cutting Deformation obtained by Parallel Cutting Lines
- Residual Stress Distribution in Electrical Ceramics/Metal Joint
- Devolopment on the Environmental Correspondence Coatings with Functions of Water Repellency and Antimicrobial Activity by Thermal Spraying
- Relationship between the Cooling Rate and the Formation of Chilled Microstructure for Laser Melting of Cast Iron-Laser Surface Modification of Cast Iron Aimed at Refining the Wear Resistance (Report 1)-
- Wear Resistance of the Surface-Modified Cast Iron by Laser Melting-Laser Surface Modification of Cast Iron Aimed at Refining the Wear Resistance (Report 2)-
- Relationship between Joining Phenomena and Yield Strength of Substrates of Dissimilar Friction Welding
4
- Joining of A1050/A5052 and A1050/Cu by Ultrasonic Bonding and their Materials Evaluation
- Effect of Twin Spot Beam Arrangement on Energy Coupling During Welding-Study of Twin Spot Nd: YAG Laser Welding of Aluminum Alloys (Rep. 3)-
- Effect of Upsetting Conditions on Flash Weld Toughness-Study on Toughness Improvement of Flash Welded Joint in High Strength Steel (Report 2)-
- Laser-Arc Hybrid Welding of Thin Steel Sheets
- High Power CO2 Laser-MIG Hybrid Welding Process for Increased Gap Tolerance-Hybrid Weldability of Thick Steel Plates with Square Groove (Report I)-
- Applicability of Stress Measurement Technique using Magneto-strictive Effect to Welded Structures
- Microstructure of Dissimilar Joint Interface of Magnesium Alloy and Aluminum Alloy by Friction Stir Welding
- Ultrasonic Evaluation of Wire Bonded Areas in Semiconductor Devices
- Lap Welding of Titanium Sheet and Mild Steel Sheet by Seam Welding
- Laser Weldability of High Strength Steel Sheets in Fabrication of Tailor Welded Blanks
- Influence of Silicon Nitride Properties on Bonding Strength of Silicon Nitride and Stainless Steel Brazed Joints
- Stress properties of Welded Portions by Hot Dip Galvanizing and Fatigue test-Fatigue Strength of Welded Joins by Hot Dip Galvanizing (Report 1)-
- Fatigue test on Large-scale Welded Girder Specimens with Hot Dip Galvanizing-Fatigue Strength of Welded Joints by Hot Dip Galvanizing (Report 2)-
- Criterion for Ductile Cracking of Structural Steel under Cyclic Loading-Evaluation of Ductile Crack Initiation for Welded Structures Subjected to Large Scale Cyclic Loading (Report 1)-
- Fatigue Strength of SM570Q Steel Non-Load-Carrying Cruciform Welded Joints by .SIGMA.max=.SIGMA.y Test
- HVOF Spraying of Mechanically Alloyed WC-Co Powder and Evaluation of its Coating Property
- Effect of Friction Speed on Initial Seizure Portion on Welded Interface-Study of Joining Mechanism of Friction Welding (Report 4)-
1
| Copyright (c) 2006-2007 Japan Science and Technology Agency. All Rights Reserved. | |
