List of Jounal Titles
A to Z index of Journal Title. Choose a letter.
Trans Mater Res Soc Jpn
29
1 - Femtosecond laser induced phenomena in active ion-doped glasses and their applications
- Lithium Ion Transfer at Electrolyte/Electrolyte Interface-Design of Highly Conductive Composite Electrolyte-
- Convergent-Beam Electron Diffraction Method for Chiral Identification of Enantiomorphic Crystals
- Synthesis and Properties of Novel Metal-Containing Polymers Having Azobenzene Units in the Main Chain
- Synthesis of Ionic-Polymer-Grafted Nanoparticles by Core-Cross-Linking of Silicon-Containing Block Copolymer Micelles
- Enzymatic Synthesis of an Alternatingly 6-Fluorinated Chitin Derivative Catalyzed by Chitinase
- Preparation of Novel Porous Oxide Catalysts from Metal-Containing Silsesquioxanes
- Discovery and Development of Superconducting Materials for Engineering Applications
- Spatial manipulation of valence states of samarium ions by the interference of multiply scattering light in random media
- Development of Electrode Materials for Semiconductor Devices
- DETERMINATION OF PARAMETERS TO CONTROL ELECTRICAL RESISTIVITIES OF NANO-SCALE COPPER INTERCONNECTS
- Electrodeposition of Metals from Quaternary Ammonium Imide Type Room Temperature Ionic Liquid
- Li-Ion Transfer at positive electrode/Electrolyte Interface
- Lithium ion transfer at the interface between electrolyte/non-graphitizable carbon electrode
- Cyclic Peptides as Scaffold for Organization of Functional Groups on Surface
- Preparation of Metal-Oxide Composite Catalysts from Homogeneous Phase
- Controlled Alignments of Metal Nanoparticles in Polymer Matrix
- Structural Studies of Expanded Fluid Metals Using Synchrotron Radiation
- Hydrogen and CO Adsorption Property of Pd Particles on SnO2 and Their Application to Electrode Catalysts
- Synthetic Strategy for Functionalized Polyacene Structure Using Nickel-Catalyzed Alkynylstannylation of 1,2-Dienes
- Investigation of Phase Decomposition Process in Mg-Y-Nd Alloys by Small Angle Scattering
- Rapid synthesis of zinc oxide nanorods by one-step, room-temperature, solid-state reaction
- Crystallinity Study of Germanium Nanodots Synthesized via reduction of Si0.54Ge0.46 Oxides
- Self-organized anisotropic strain engineering for quantum dot ordering
- Self-Formation of Uniform InAs Quantum Dots and Quantum-Dot Chains
- Fabrication of Anisotropic Magnetic Nanostructures by Soft Chemical Approach
- Self-Assembled GaAs/GaSb Quantum Dots by Molecular Beam Epitaxy
- Fabrication of finite aligned nano-hole and trench structures with atomically flat surface by using atomic hydrogen induced surface cleaning technique
- Self-organized formation of erbium-silicon-oxide superlattice
- Synthesis of Block and Random Copolymers of 3-Vinylpyridine by Nitroxide-Mediated Radical Polymerization
- Reorganization and Scrambling Behavior of Alkoxyamine-Based Dynamic Covalent Polymers by Macromolecular Radical Crossover Reaction
- Preparation of Polymer Nanohybrid via in situ Synthesis of Inorganic Nanofiber in Polymer Solution
- Site-Specific Arrangement of Microparticles on Organosilane Monolayer Patterned through Photolithography Process
- Control of Interfacial Structure and Properties of Magnetite Nanoparticle through Surface-Initiated Nitroxide-Mediated Radical Polymerization of Styrene and 3-Vinylpyridine
- Influence of Octacyclopentylsilsesquioxane Nanofiller on the Dewetting Behavior of Polymer Thin Film
- Synthesis and Characterization of Novel Azacrown Core Dendrimers and Functional Dendrons with Long Alkyl Chain Spacers
- Preparation of the Nanoparticles Dispersed in Random Copolymer
- Surface Molecular Mobility and Functionality for Amphiphilic Copolymers Having Hydrophilic and/or Hydrophobic Side-Chains
- Segmented Polyurethane/2-Methacryloyloxyethyl Phosphorylcholine Nano-Ordered Surface Morphology for Biomedical Applications
- Regulation of Nano-surface Properties by Finely Synthesized Fluorinated Phosphorylcholine Polymers
- Water Intrusion Property on Novel Porous Matrix Composed of Bioinspired Polymer Stereocomplex
- Self-Organized Hierarchical Structure of a Semi-Rod-Coil Diblock Copolymer
- Preparation and Structure of Water-dispersible Silver Nanoparticles with Highly Positively Charged Surface
- Conjugated Material Self-assembly: Towards Supramolecular Electronics
- Metallo-Supramolecular Polymers: Towards New Functional Materials with Controlled Nanostructures
- Nanostructured Polymer/Layered Silicated Materials
- Effects of Nanoporous Morphology on the Photoelectrochemical Responses from Dye-Gold Nanoparticle Multistructures
- Segmental Motion in Polystyrene Thin and Ultrathin Films Based on Dynamic Viscoelastic Measurement
- Nanoscale Patterning of Metal nanoparticles in Polymer Thin Films
- Characterizations and Surface Wettability of Fluorinated Block Copolymers Synthesized by Atom Transfer Radical Polymerization
- Influence of annealing treatment on the Adhesion of Poly(butylene terephthalate) and its Interfacial structure
- Novel Orientation Textures of Poly(vinylidene fluoride) in the Blend with Nylon 11
- Novel formation method of opto-electric devices by using vacuum process
- Preparation of Supramolecular Assembly Films of Fullerene C60 on the Aqueous Solution of Water-soluble Azocalixarene
- Triblock Copolymer Synthesis of Highly Ordered Titanium-substituted Mesoporous Silica with the Aid of Prehydrolysis Route
- Crystal Structure in the Near-Surface Region of Melt-Crystallized Polyethylene Films Investigated by Grazing Incidence X-ray Diffraction
- Reflectometric Investigation of Monolayers of Copolymers with Dendritic and Perfluoroalkyl Side Chains
- Synthesis of a zero-birefringence optical polymer by the birefringent crystal dopant method and analysis of its characteristics
- The Phase Behavior of Polymer Blends under High Shear Flow/High Pressure Fields
- Polyimides Having Dendron Side Chains
- Microstructure and Interfacial Interaction of Polyimide Based Hybrid Nanocomposites
- Microstructure and Properties of PBT/EVA-g-MAH/Organoclay Ternary Nanocomposites
- Surface Segregation of Fluoroalkyl Side Group of Fluorinated Block Copolymers
- Evaluation of noise filtering function of biological ion Channel by H infinity control theory
- Combinatorial Catalysis Tool Under High Pressure For Heterogeneous Catalyst Consisting of Multi-Well Microplate System, Neural Network and Genetic Algorithm-Optimization of Cu-Zn-Al-Ga Oxide Catalyst
- Multi-dimensional data management by virtual sample library written in object-oriented script language Ruby
- The recovery of radiation damages in ZnO introduced by combinatorial ion implantation techniques
- Computational Techniques for Studying the Structure/Acidity Relationship in Zeolites and Zeolite-type Materials
- High Throughput Preparation and Characterization of Pseudo-ternary Compounds by Combinatorial Wet-dry Process
- Combinatorial catalysis concerning PEMFC technology
- Soft Magnetic Properties of Iron based Aerosol Deposition film
- High-Throughput Experimentation in Polymer Chemistry
- Characterization of Organic-Inorganic Composite Thin Films by TEM and XANES
- Precursor test for the deposition of carbon nitride thin films using microwave plasma enhanced chemical vapor deposition
- Surface Plasmon Resonance Imaging Detection of DNA Hybridization Using Colloidal Au Attached Probe DNA
- A Transparent Microchannel Chip for Quantitative PCR
- Thermal Characterization of Amino-Terminated Self-Assembled Monolayers
- Electrical and Mechanical Characteristics of Precious Metal-Doped Carbon Films
- Magnetic behaviour of Co@Ag nanoparticles prepared by the microemulsion technique
- Self-assembled hexagonal Au and Ag particle networks on silicon from Au and Ag nanoparticle solutions
- Measurement of the mechanical properties of fatty acid solutions confined between solid surfaces
- High Water-repellent Sheets Prepared by Nanoimprint Process
- Nano/micro patterning of ceramic thin films and fine particles
2 - Microstructure and Sintering Behavior of Hafnia-based Thermal Barrier Coating by EB-PVD Process
- A New Laser CVD Process for Thermal Barrier Coatings
- Thermal Conductivity of Yttria-stabilized Zirconia Films Measured by a Laser-heating AC Method
- Microstructure of YSZ Films Prepared by MOCVD
- New Oxide Compounds for Thermal Barrier Coating
- Microstructure modification of YSZ layers prepared by EB-PVD
- Alumina-Zirconia Composite Coating Fabricated from Nano-size Powders
- Alumina-based Nano Composite Coating Prepared by Plasma Spray
- Design of Thin Films with Tailored Nano-morphology
- The Effect of Processing Temperature on the Columnar Structure of ZrO2-4mol%Y203 Thermal Barrier Coatings Fabricated by Electron Beam Physical Vapor Deposition
- Analysis of Thermal Conductivity and Thermal Diffusivity of EB-PVD Coating Materials
- TEM and XPS analysis of (Ti,Cr)CN/DLC superhard nanocomposite coatings
- Stress depth profile in ceramic films on different interfacial layers
- Nanolithography and Nanochemistry utilizing Scanning Probe Techniques: Directed Self-Assembly of Sub-Micrometer-Sized Structures by Scanning Probe Lithography Defined Templates
- Self-Organized Nanostructure Formation on High-Index Si Surfaces Induced by Ga
- Designer DNA: Design and Synthesis of DNA Nanostructures
- UHV-STM/STS Studies of Lanthanum Endohedral Metallofullerenes
- Microstructure of Carbon Coils
- Electric and Mechanical Properties of Carbon Coils
- Preparation and properties of super-elastic carbon microcoils by Ni-catalyzed CVD
- Electromagentic Wave Absorption Properties of Carbon Microcoils/Nanocoils
- Preparation of Ceramics/Carbon Microcoils Composites using Carbon Microcoils as a Template
- Structure of Carbon Coils observed by Neutron Diffraction
- Graphite Nanofibers-A Unique Catalyst Support Media
- Cosmo-mimetic Helical/Spiral Materials and Their Potential Applications
- Morphologies, Microstructure and Growth Mechanism of Carbon Nanocoils over Stainless Steel Catalysts
- Preparation and morphologies of elastic carbon microcoils/nanocoils by various catalysts
- Preparation of Carbon Microcoils/Nanocoils and their Morphologies
- Hydrogen Absorption of Carbon Micro Coils
- Effects of Mechanical Milling on Hydrogen Absorption Behavior of Carbon Micro Coils
- Synthesis of Twisted Carbon Nanofiber by Catalytic CVD Method
- Carbon nanohelical coils and nanotubes preparation using metal clusters synthesized by plasma-gas-condensation
- Morphology and Helical Growth Mechanism of Plasmalemma in Cotton Fiber
- Direct Observation of the Growth of Helical and Spiral Graphite Nanofibers
- Vapor phase preparation of carbon nanocoils by noble metal catalysts
- Solubilization of Carbon Nanotubes with a Pyrene-carrying Polymer in Water
- Nanohorns Particle Including Metal-Nanocapsule Formed by Arc Discharge in Liquid Nitrogen
- Selective Formations of Fe-Included Carbon Nanocapsules and Nanotubes by Pyrolysis of Ferrocene
- Liquid phase synthesis of the nanowhiskers of fullerene derivatives
- Cap-Formation Process of a Carbon Nanotube
- Preparation of Fullerodendrimers by the Use of a Diels-Alder Reaction
- Continuous Synthesis of Nanocarbons using an Induction Plasma Reactor
- Quasiparticle Band Structure of Carbon Nanotubes
- Effect of Multi-catalysts on Carbon Nanofiber Synthesis in CVD
- Application of Density Functional Heaviside-Fermi Level Operator Formalism to Large Molecules and Nanoscale Materials
- Nanotech Net Working of New Materials using Pulsed Power Technology
- Improvement of Nerve-Cell Affinity of Silicone Rubber by Carbon-Negative-Ion Implantation and Its Application to Rat Sciatic Nerve Regeneration
- Observation of ion implanted materials using 3D electron microscope
- Formation of Patterned Cellular Chips by Ion-beam Irradiation into Biodegradable Polymer
- Ion Beam Irradiated ePTFE Remarkably Improving Fibrin Glue and Tissue Adhesion
- Ion-Beam Modification of Coronary Stent Grafts
- Ion Implantation into ePTFE for Therapy of Broad-based Brain Aneurysms
- Effects of Ion Microbeam Irradiation on Silica Glass
- Iron nano-clusters in SiO2 synthesized by ion implantation and the magnetic properties
- Size Distribution Control of Alpha-iron Nano-particles in Iron-implanted Al2O3 by Multi-step Implantation Combined with Moderate Annealing
- Magneto-optical Kerr Effect of Nickel Nanoparticles in SiO2 Fabricated by Negative-ion Implantation of 60 keV
- Nonlinear Optical Response of Metal Nanoparticle Composites for Optical Applications
- Optical Transitions in Silica Glass During Heavy Ion Implantation
- The Dielectric Constant and Crystalline Size of TiO2 Films Deposited on Silicon by Use of Ionized Oxygen
- Hardness of DLC film prepared using toluene plasma and hybrid process of plasma-based ion implantation and deposition
- Effects of Si Content in DLC Films on Their Friction and Wear Properties
- Ion Beam Modification of Al-Doped ZnO Thin Films
- Reaction between Si Substrates and High-Density, High-Temperature Zr Plasma Produced by Ion-Beam Evaporation
- Elucidation of Droplet Development Process in Al Thin Films Prepared by Ion-Beam Evaporation
- Enlargement of Compositionally Gradient Area in Si-Ge Thin Films Prepared by Ion-Beam Evaporation
3 - Annealing Effects on the Mixed Abrasive Slurry in the Oxide Chemical Mechanical Polishing
- Chemical Mechanical Polishing (CMP) Characteristics of Ferroelectric Thin Films for FRAM Applications
- Thermal stability and electrical characteristics of ultrathin high-k dielectric metal oxide films on the SiON-passivated Si substrate
- Borazine-Siloxane Polymer, A Novel Low-k Material
- Electrical characterization using scanning probe microscopy for microscopic diagnosis of device structure
- Vertical Double-Gate MOSFET Fabricated Using Ion-Bombardment-Retarded Etching
- Current Status and Future Prospects of Low Dielectric Constant Materials for ULSI Applications
- Tight-Binding Quantum Chemical Molecular Dynamics Simulations on Low Energy Boron Implantation Process into Silicon Surface
- The Nano-CMOS era. Will CMOS be scaled beyond the roadmap?
- Self-aligned FinFETs with Wide Source/Drain Regions
- Structure and electrodynamics at a crystalline oxide-semiconductor heterojunction: dipole charges and the "Coulomb Buffer" in the Si(001):SrSi2:SrO interface
- Analysis of New SOI Materials and Advanced SOI MOSFETs
- Technology Requirements for 45nm Node CMOS and beyond
- High-performance and Damage-free Plasma Etching Processes for Future ULSI Patterning
- A Fresh Dimension to Interface Research-Geometrical Interface Engineering and Research management-
- Self-assembling Dyes for Use as Molecular Rectifiers
- Nano-Electrostatic phenomena at metal-Phthalocyanine film interface
- High Field Transport at Interface of Conducting Polymer/Metal Junctions
- Photoirradiation Effects on Polymer Light-Emitting Devices
- Electrical characterization of a P3 HT thin film prepared by an applying-field casting method
- Multiple Surface Plasmon Excitations and Emission Light due to Reverse Irradiation in Kretschmann Configuration with Nanostructured Dye LB Films
- Chromogenic Responses Induced by Electric Field in Phthalocyanine Derivative LB Films
- Rotational molecular deformation of Ion selective channel protein that perforate excitable biological membrane.
- Enhanced Electrochemomechanical Deformation of Polyaniline Film by Optimization of pH and Electrolyte Concentration
- Electrochemical Biosensor Based on Thin Conducting Polymer Film for Phenol
- Photoelectric Cells of Organic Dye Thin Films Utilizing Surface Plasmon Excitations
- Pure Polarization Gratings from Photocrosslinkable Polymer Liquid Crystals
- Antiferroelectric Siloxane Twin Liquid Crystal
- Light-Induced Dynamic Behaviors and Tailored Droplet Arrays of Micro- Droplets in Photoresponsive Liquid Crystal Emulsions
- Novel Liquid Crystalline Compounds Based on 4-Ary1-2,3,5,6,7,8- hexasilabicyclo[2.2.2]octanes
- Photochemical switching behavior of composites of polymer liquid crystal/cholesteric liquid crystal by photoisomerization of chiral azobenzene molecules
- Photochemical tuning of the helical structure of cholesteric LC by photoisomerization of chiral azobenzene-based compounds
- Phase Transitions and Orientational Structures of Ionic Liquid Crystalline Polymers and Their Nonionic Family
- Influence of Aligned Fine Polymer Fibers on Thermal Phase Transition of Liquid Crystal
- (Polymer/Liquid Crystal) Composite Systems with Steep Electro-optical Response and Elucidation of its Mechanism based on Light Scattering and Dielectric Property
- Electro-Rheological Behavior of Hydrogen-Bonded Liquid Crystalline 4'-n-Docosyloxy-3'-nitrobiphenyl-4-carboxylic Acid (ANBC-22) under Sinusoidal Electric Field
- Creation of Large Size Monodomains of Polymer-stabilized Cholesteric Blue Phases
- Electro-optical Properties of Liquid Crystal Molecules in the Induced Isotropic state by Polymer Network
- Study of Molecular Interactions in the Photopolymerization-Induced Phase Separation of Liquid Crystal and Polymers
- Synthesis and Thermal Properties of Liquid Crystals having a Carbonyl Group at the Terminal Position
- Effect of Molecular Structure on the Formation of Chiral Smectic C Phase in Some Ester Compounds
- Memory Effect of Liquid Crystals Dispersed in Ferroelectric Copolymer of Vinylidene Fluoride and Trifluoroethylene
- Thermal Properties and Molecular Arrangement of Smectic Phase for 4-Alkoxy-3-nitrobenzoic Acids
- Molecular dynamics simulation of a nematic liquid crystal under an applied electric field
- Fabrication of Functional Devices Based on Highly Ordered Nanohole Arrays in Anodic Porous Alumina
- Fabrication and Electrochemical Study of Fractal Polypyrrole
- Self Assemble Structure of Amphiphilic Di-block Copolymer Having Azobenzene Moieties
- Tunable Structural Color in Colloidal Crystal Films
- Enhanced Optical Sensing of Biological Important Anions with Functionalized Gold Nanoparticles
- Synthesis and Chiroptical Property of Helical Conjugated Poly(isocyanide) derived from L-Valine
- Surface plasmon resonance from self-assembled Ag nanodots prepared by one-step pulsed laser deposition
- Photopattern Shapes of a Photodegradable Polyelectrolyte Monolayer Affected by an Ionic Strength of Aqueous Developer Solutions
- Photoswitchable Magnetic Langmuir-Blodgett Films
- Morphology Control of Fibrous Molecular Self-Assemblages Formed from an Azopyridine Carboxylic Acid
- Porphyrin Supramolecules as Materials for Photosynthesis and Third Order Nonlinear Optics
- Study of the Organic-inorganic Multi-layer Thin Films Fabricated via a Layer-by-layer Self Assembly Method for an Optical Filter
- Preparation of Monodispersed Polymer Particles Containing Azobenzene Moieties
- Structure and Properties of Protonated Water-insoluble Porphyrin J-Aggregates Formed at Liquid-Liquid or Gas-Liquid interface
- Molecular Wire by Supramolecular Array of Hexacoordinating Imidazolyl Porphyrin Ga Complex
- Study of optimized bandwidth depending on dopants in perfluorinated graded index polymer optical fibers
- Dye-sensitised Solar Cell Using Chlorophyll Immobilized on TiO2 Nanocrystalline Film Electrode
- The Response Characteristic of Optical Carbon Dioxide Sensor Using pH Indicator Immobilized in Ethyl Cellulose Film
- Visible Light-induced H2 Production from the Bioresources Using Photosensitization of Zn Chlorophyll-.ALPHA.
- Development of Pressure-Sensitive Paints: Electro- and Photochemical Behavior of a Porphyrin Monolayer
- PHOTOCHEMICAL PROPERTY OF PORPHYRIN DERIVATIVES ASSEMBLED ON DIRUTHENIUM COMPLEX HAVING A SIMILAR FRAME OF HEMERYTHRIN
- Photoelectrochemical Formation of Nano-Porous Structures on TiO2 Film Electrode
- Nanoporous and Low-Density Materials for Laser Produced Extreme UV Light Source
- Regioselective Immobilization of Protein on the Surface of Polymeric Microchannel by Photo-reactive Crosslinker
- Photo-Fluorescent Behaviors of MMA or St-Copolymers having Azomethine Side Chain Groups Synthesized by the Reaction of Coploy-Vinylguanamine Units with p-Dimethylaminobenzaldehyde
- Photoinduced Reorientation of Liquid Crystals Doped with Thiophene having Ester Moieties
- Electronic structure of oligo-3,4-ethylenedioxythiophene
- ESR and ENDOR Spectroscopy of Solitons and Polarons in .PI.-Conjugated Polymers
- Charge Carrier Studies of Regioregular Polyalkylthiophene
- Photogeneration and Recombination Kinetics of Charged Excitations in Conducting Polymer/Fullerene Composites
- Third-harmonic generation in CT-type conjugated polymers
- Thiophene-Based Semiconducting Materials: Integrated Functionalities of Electronics and Photonics
- Mesomorphic and Luminescent Polyacetylenes
- Structures and Properties of Liquid Crystalline Materials Oriented under Magnetic Field
- Influences of Surface Shape of Thin Films on Electrical Characteristics of Organic Electroluminescent Devices
- Ribbon-Formed Organosulfur Supramolecules for Novel Nanoenergy Devices
- Application of Poly(3,4-ethylenedioxythiophene) in Dye-Sensitized Solar Cells
- Dye-sensitized Solar Cells Using Ionic Liquid-based Electrolytes
- Effects of Compositions of Boroxine Polymers on Electrochemical Properties of PEO-based Electrolyte Systems
- Ionic Conductivity and Mechanical Property of Cross-linked Hyperbranched Polymer Electrolytes for Lithium Secondary Batteries
- Design of Lithium Polymer Gel Electrolyte Using Ion-polymer Interaction
- Polymer Electrolyte Membranes from Novel Sulfonated Polyimides for Direct Methanol Fuel Cell
- Performance of Polymer Electrolyte Membrane Fuel Cells Made from Sulfonated Polyimide
- Pyridine as a Bronsted Base for Anhydrous Proton Conductors
4 - Piezoelectic Properties of Alkaline Niobate Perovskite Ceramics
- ON THE THEORETICAL MODELS OF FERROELECTRIC THIN FILMS AND GRADED FERROELCTRICS
- Recent Development Trend of Piezoelectric Single Crystals: A Review
- Effect of Rare Earth Oxide, Ho, on dc Electrical Degradation for Ni-MLCC
- Structure and Reliability Issues of (Bi,Nd)4Ti3O12 Ferroelectric Thin Films
- Temperature-dependent ferroelectric properties of (Pb0.75La0.25)TiO3 thin films
- CO2 Laser Annealing Effect of Electrical Properties and Microstructures on Pb(Zr,Ti)O3 Thick Films Prepared by Aerosol Deposition
- Dielectric Film by Aerosol Deposition Method for Microwave Filter Application
- Theory of Dielectric Constant in Porous Materials
- Microwave Characterization of (La,Sr)(Al,Ta)O3 Using TE011 Mode Dielectric Resonator
- Phase Transformation in Aerosol Deposition Method of Aluminum Nitride
- Preparation of Ferroelectric PbSc0.5Ta0.5O3 Thin Films by Pulsed Laser Deposition
- Synthesis of Perovskite Oxide Films for Memory Applications
- Effect of Buffer Layer of Undoped Bi4Ti3O12 Thin Films Prepared by Metalorganic Chemical Vapor Deposition
- Ferroelectricity and Electronic Structure of Sm-Doped SrBi2Ta2O9 Ceramics
- Ferroelectricity of C-Axis Oriented Ba2NaNb5O15 on La-doped SrTiO3 Prepared by Pulsed Laser Deposition
- Orientation Control of Bi4Ti3O12 Thin Film by Two-Dimensional RF Magnetron Sputtering
- Superparaelectric State of LiTaO3 Nanoparticles Embedded in a Mesoporous Silicate
- Synthesis and Electric Properties of M2BiNb5O15 (M=Na, K) Tetragonal Tungsten Bronze Type Oxides
- Study of Acoustic Anomalies in Pb(Mg1/3Nb2/3)O3-PbTiO3 Relaxor Single Crystal by Brillouin Scattering
- 500MHz-18GHz Microwave Absorber Using Magnetic-Dielectric Composite Material
- Preparation of Oriented PZT Films via Sol-Gel Method and Their Dielectric and Piezoelectric Properties
- Domain Structures of Pb(Mg1/3 Nb2/3)O3-PbTiO3 Single Crystals for Various Cooling Rate Observed using Contact Resonance PFM
- Micro-Brillouin Scattering Study of Pb[(Zn1/3Nb2/3)0.91Ti0.09] O3 Relaxor Ferroeletric Crystals
- Effect of Y doping on Mn valence in BaTiO3 dielectric system
- Effect of A-Site Substitution on Electrical Properties of Pb(ZrX,Ti1-X)O3 Thin Films with Chemical Solution Deposition
- Measurement of Space Charge in Insulating Polymer by Pulsed Electroacoustic Method
- MnCO3 and CaZrO3 Additive Effects on Electrical Properties of BaTiO3 Ceramics
- The Influence of CaZrO3 on Microstructure and Dielectric Properties of BaTiO3
- Nonlinear Characteristics of Piezoelectric Ceramics
- Influence of mm-wave annealing on ferroelectrics properties of PZT films fabricated by AD method
- Preparation of Texture Controlled Lead Zirconate Titanate Thick Films with Seed Layer
- Magnitudes of Nonlinear Susceptibility Coefficients for First Order Transitions in Bulk Ferroelectrics
- Evaluation of Domain Observation in Pb(Zn1/3Nb2/3)O3-20%PbTiO3 by Kelvin Force Microscopy
- Structure and Dielectric Properties of Co-Sputtered (Ba0.5 Sr0.5)TiO3 Thin Films
- Preparation of Alumina Thick Films by Aerosol Deposition Method for Integrated RE Modules
- Domain Size Dependence on Piezoelectric Property of BaTiO3 Single Crystals with Engineered Domain Configuration
- Growth of Silver Niobate Based Single Crystals from Their Stoichiometric Composition Melts
- Size Effect on Dielectric Properties of Barium Titanate Fine Particles
- Ferroelectric behavior in SrZrO3/SrTiO3 Artificial Superlattices
- Low Temperature Fabrication of BaTiO3 Thick Films by Aerosol Deposition Method and Their Electric Properties
- Dielectric Spectra of (Ba0.6Sr0.4)TiO3 and Ba(Zr0.25Ti0.75)O3 Ceramics in RF Region Measured by Impedance Analyzers
- Frequency Dependence of Piezoelectric d-constant of PZT Ceramics Determined from Direct and Converse Effects
- Development of Ag-sheathed Bi2223 superconducting wires
- Recent Processing Advances For Increased Jc in (Bi,Pb)2Sr2Ca2Cu3Ox
- Transition state of phase formation during sintering process inside Ag-sheathed (Bi,Pb)2223 tape
- Fabrication and Superconducting Properties of Suspension-spun MgB2 Filament
- Effect of post-annealing on superconductive properties of dip-coated Bi-2223 tapes
- Investigation of Crystal Defects in YBCO Films by Post-Annealing of Precursor Films Including BaF2
- Fabrication of Sm 123 film on Ni textured substrate by PLD method
- Fabrication and microwave properties of double side Tl(Ba,Sr)2Ca2Cu3Oy films on LSAT substrate
- Weak Ferromagnetism of La1.99Sr0.01CuO4 Thin Films: Epitaxial Strain and Corrugation in CuO2 planes
- Preparation and characterization of NdBa2Cu3O7-.DELTA. thin films on MgO substrates with Ba2NdTaO6 buffer layers
- Narrowband Superconducting Filters for Mobile Communication
- YBCO film properties for 2GHz band receivers with HTS filters and the filter characteristics
- High-Tc SQUIDs Magnetocardiography Systems
- Nondestructive Evaluation of Cracks with High-Tc SQUIDs and Perspective
- Application of 60 mm-diameter Superconducting Bulk Magnet to Magnetron Sputtering
- Construction of A Wide and Strong Magnetic Field Generator Using melt-processed High Tc Bulk Superconductors Arrayed in One Plane
- Flux pinning allowing levitation experiments at liquid oxygen temperature
- Pulsed Magnetization for Gd-Ba-Cu-O Bulk with a Couple of Vortex-type Coils
- Conductive Properties of ReO3/SrCuO2 Bilayered Films
- Anomalous oxygen annealing effects on (Cu,C)-1223
- Electronic Transport Properties of C60 Derivative Self-Assembly Monolayer on Au Ultrathin Film
- Preparation of MgB2/AlN/MgB2 multi-layers for Josephson tunnel junctions
- Preparation of Josephson Junctions by MOCVD films
- In-Phase Motion of Vortices in Intrinsic Josephson Junctions in Mesas of Bi2Sr2CaCu2Oy Single Crystals
- In-situ Characterization of Electronic Structure of Engineered Surfaces of c-axis YBCO films for Sandwich type Junctions
- Interaction between optical phonons and ac Josephson oscillations in intrinsic Josephson junctions of (Bi1-xPbx)2Sr2CaCu2Oy
- Temperature Dependence of Shapiro Steps in Surface Intrinsic Josephson Junctions of Bi2Sr2CaCu2Oy Single Crystals
- Temperature dependence of critical currents of small-sized intrinsic Josephson junctions in Bi2Sr2CaCu2Oy
- Crystal Growth of Relaxor Ferroelectric Solid Solution Single Crystals near a Morphotropic Phase Boundary with High Curie Temperature and Some Properties.
- Structural and Electrical Properties of Bi4-xLaxTi3O12 Thin Films Formed on p-Si(100) Substrates
- Array of PZT Films Preparation by Sol-gel Method
- Pulsed Laser Deposition and Characterization of (001)-oriented Pb(Zr0.52Ti0.48)O3/LaNiO3 Heterostructures
- Improvement of Pb(Zr0.52Ti0.48)O3 Thin Films with LaNiO3 as Bottom Electrodes
- Dielectric properties of SrTiO3 films under electric fields
- YBa2Cu3O7-d Films with a Nanoparticulate Dispersion of Y2BaCuO5 for Enhanced Flux Pinning
- Improvements in Current-density of YBa2Cu3O7-.DELTA. Films on Sapphire Buffered with Atomically flat CeO2 Having High Density of Nanodots
- Shock-Compaction of Bi-Pb-Sr-Ca-Cu-O Particles
- Preparation of Bi2Sr2Can-1CunOy thick films on MgO by chemical solution deposition
- Bi2Sr2Can-1CunOy superconducting films deposited by rf magnetron sputtering under magnetic field
- Bi2Sr2Can-1CunOy sputtered films deposited using Bi-Sr-Cu-O and Ca-Cu-O targets
- BiSrCaCuO thin films with deficit of bismuth synthesized by Molecular Beam Epitaxy
- Growth of Bi-based whiskers from the glassy quenched platelets including SiO2, TiO2 and Al2O3
- Physics aspects of ferromagnetic/superconducting superlattices
- Time constant of laser-induced thermoelectric voltage device made by LaCaMnO3, YBa2Cu3O7-.SIGMA. and LaSrCoO3 thin films
- Synthesis and Physics in YBa2Cu3O7/La0.7Sr0.3MnO3 Heterostructures
- Electrical and Magnetic Properties of La(Ba)MnO3 Thin Films
- Preparations and Evaluations of Magnetoelectric Oxides / Superconductor Multilayers
- Magnetic Properties of Gd-Al-Substituted Garnet films for Microwave Devices
- Large-Area ITO Deposition Technology and Its Application to Flexible Film Type Solar Cells
- Nano-porous TiO2 Thin Film for Dye-sensitized Solar Cell
- Optical constants of RF sputtered amorphous TiO2 Films
- Synthesis of Titania Hollow Spheres Using Non-aqueous Emulsions
- Photo-rechargeability of TiO2/LiMn2O4 Bi-layer Film Electrodes Prepared by Pulsed Laser Deposition
- Organic-Inorganic Composite SiO2/Al2O3 Films and Their Fine-Patterning by Sol-gel Process
- Mechanical and Electrical Properties of Rare earth-Doped Ceria Ceramics for SOFC Electrolytes
- Preparation and evaluation of Mn-Doped ZnO films
- Evaluation of Some Indium .BETA.-Diketonates as a Precursor for Preparing In2O3 Thin Films by MOCVD
- Effect of Recoiled Oxygen on Characteristics of ITO Films Deposited by Ion Beam Sputtering
- Efficiency of Magnetic Alignment Detected for Non-magnetic Oxide Crystals Deriving from Individual Bonding Orbital
- Magnetic and Electric functionalities of magnet-ferroelectrics BiFe1-x MnxO3 (0.LEQ.x.LEQ.0.5)
- Curie Temperature of Ferromagnetic Metal Mono-layers Studied by First Principle Band Calculation
- Temperature Dependence of the Rare-Earth Sublattice Magnetic Moments in R3Fe5O12 (R=Sm, Gd, and Dy) investigated by X-ray Magnetic Circular Dichroism
- Controllability of rotation of magnetization vortex in Fe particles
- Fe Doping Effects on the Optical and Magnetic Properties of Indium Oxide
- Electric and Magnetic Properties of Eu1-xBaxMnO3
- Magnetism and dielectricity in Nd1-x Prx FeO3+.ALPHA.
- Efficiency of Magnetic Alignment Detected for Non-Magnetic Insulators in Terrestrial and in Micro-Gravity Condition
- Reduction of Field-Intensity to Achieve Magnetic Alignment of Non-Ferromagnetic Micron-Sized Particles by Reduction of Temperature
- Tunnel Conductance in Ni80Fe20/Al-oxide/Al Junctions below the Superconducting Temperature of Al Films
- Enhanced Current-perpendicular-to-plane Giant Magnetoresistance in Single Spin-valve with Synthetic Antiferromagnet Free layers
- Electromagnetic and structural properties in (La,Y)(Mn,Ni)O3+.DELTA.
- Fabrication and magnetoresistance of the diluted magnetic semiconductor (In,Mn)Sb
- Room Temperature Magneto-Resistance of Fe3O4/Ag Granular System
- Long-time-annealing and interdiffusion at AlOX/Co-Fe/Ir-Mn interfaces
- Improvement of Insulating Characteristics for TMR Granular Multilayers Using Combined Insulators, MgF2 and Al2O3.
- Magnetization Studies of Exchanged Coupled CoFe2/CoFe2O4 Bilayers
- Effect of Nitrogen on Magnetic Properties of FePt-Al2O3 Granular Thin Film
- Effect of Hydrogen on the Preparation of Fe/Pt Multilayer
- Perpendicular magnetic anisotropy of CoPt-TiN nanocomposite magnetic films
- Relationship between Surface Morphology and Magnetic Property of Co/Pd Multilayers
- Writer Materials for High Performance Hard Disk Drives
- Soft Magnetic Fe-Co-B/Ni-Fe Double Layer with High Magnetic Anisotropy Field
- Interlayer Exchange Coupling across Epitaxial Tunnel Barriers Consisting of Si Layers or Si-Ge Layered Structures
- Structure and exchange coupling in (100) oriented Co/Ir artificial alloys
- Transport Property of Magnetic Nanojunction Prepared Using Substrate Transformation
- Magnetoresistance of Nanojunction Configured With Crossing Two Film Edges
- Magnetoresistance of Co-Pt-ITO composites film
- Improvement of perpendicular coercivity of Hexagonal M-type ferrite thin films on Pt underlayer prepared by flash-annealing
- Soft Magnetic Properties and Microstructure of Ni81Fe19/(Fe70Co30)99(Al2O3)1 Films Deposited by Ion Beam Sputtering
- Irradiation Effects in Fe/Si and Fe/FeSi Multilayers
- Effects of Substrate Temperature on Crystal Structure and Magnetic Properties of Sm-Co/Cu Films with Perpendicular Anisotropy
- The influence of annealing temperature on magnetic and magneto-optical properties of Ni films
- Influence of the particle size distribution on magneto-optical property of Bi-YIG particulate film
- High-Rate and Low-Temperature Sputter-Deposition of Ni-Zn Ferrite Thin-Films
- YIG Ferrite Thin-films Epitaxially Grown by Reactive Sputtering Method
- Magnetization Processes in Single Domain Permalloy Thin Films
- Magnetic Properties of Encapsulated Co Nanoparticles Prepared with Reversed Micelle
- Structural Characterization of Oriented Llo-FePd Nanoparticles
- Effects of Co doping on the magnetic properties of Fe2O3 nanoparticles
- Preparation of submicron magnetic latex by miniemulsion polymerization
- Synthesis of monodisperse ferrite nanoparticles coated with polyacrylic acid (PAA)
- Magnetic and Electrochemical Studies on Li-Mn-Ni Spinel Oxides
- Magnetic Properties of High Bs Manganese Zinc Ferrites
- Low-Temperature Sintering of (Ni,Zn)Fe2O4 by Hot Isostatic Press
- Effect of Additives and Ribbon Thickness on Magnetic Properties in Nanocrystalline Fe9.4-xCo70Nb2.6Si9B9Mx Alloys (M: Nb, Zr, W, Mo, V, Cr, Ti, Ni, Si, Al, Ga)
- Magnetic Properties of Sm-Fe-Co-Cu-Nb-B Melt-Spun Ribbons
- Magnetic Study on Olivine Compounds
- Damage Evaluation Techniques for FBR and LWR Structural Materials Based on Magnetic and Corrosion Properties along Grain Boundaries
- Magnetoresistance in Co-Cu metastable alloys prepared by mechanical alloying and shock-compression
- Nanocrystalline Deposition for Developing High Permeability Ferromagnetic Materials
- Effect of Annealing on the GMI Response of Electroplated NiFe/Cu Composite Wire
- Effect of Annealing on Magnetic Properties of NiFe/Cu Composite Wires
- Magnetic property enhancement of nanocrystalline Pr2Fe23B3 melt-spun ribbons by refractory elements substitution
- Innovative Magnetic Bearing Motor
- Effects of Cu addition on Nd-Fe-B sintered magnets with High-Br
- Plating of Metal (Co, Ag) Thin Films on Hollow Microspheres of Low Density and Its Application to Lightweight Microwave Absorbers
- Noise Suppression Effect of Nano-granular Magnetic Thin Films at GHz Frequency
- Development of Ni-Zn Ferrite Materials with Improved Ingress Noise for Telecommunications
- FeSi/IrMn Exchange-Coupled Multilayer Film with Plural FMR Absorptions
- High Permeability Soft Magnetic Multilayer Films with Fe-Ni Alloy for GHz Range
- Low Height YIG Circulator using Microstrip Line
- Magnetization Reversal Study of Co Films on Nano-sized Pyramidal Ag Islands
5 - Multi-Layered Ni in Ni-Cr Coating System for High Decorative and Corrosion Resistance
- Processing and application of sandwich-structured natural fiber reinforced polymers
- High Performance Magnesium Composite Alloy by Employing Wasted High Purity SiO2 Ingot
- Hydrogen permeation behavior in aluminum alloys
- Recovery of copper by solvent extraction from spent ammonia etching solutions- recent development in China
- Recycling of Nickel from Spent Electroless Nickel Plating Baths Using Solvent Extraction
- Environmental Material Management for Outdoor Telecommunication Network Systems
- Consolidation of Fe-Cu PM alloy for recycling of scrap iron
- Effect of Elements in Copper-enriched Liquid Phase on Surface Hot Shortness in Steels
- Spray Forming of a Ti Alloy by a Low Pressure Plasma Spraying Method
- 'Ecomaterials' in Japan through the Web-sites survey
- Environmental Effect Estimation of a New Technology Using Total Material Requirement
- Rating of ecomaterials from the sustainability perspectives: A semi-quantitative method (SAM)
- Challenges and Practical Approach of End of Life Calculation Methods in Life Cycle Assessment
- Use of Plastic Wastes as a Substitution Coal for the Optimization of Carbon Dioxide Reduction
- Long-term behavior of vitrified waste: morphology and protective properties of the gel formed during glass alteration
- Significance of Rapidly Solidified Aluminum Alloy Strips for High Quality Recycling
- A High-Speed Twin Roll Caster for Aluminum Alloy Thin Strip
- Development of Civic Model on Materials Technology for Recycling-Based Society
- Development of refining technology of metallic impurities in molten aluminum scrap
- Metal Recycling in the Craft Villages of Vietnam
- Waste Treatment using Thermochemical Materials Separation
- Environmental and Economic Analysis of Zero-Emission Chemical Recycling Technology for Waste Plastics From Used Electrical Appliances and Automobile Shredder Residue
- CHEMICAL RECYCLING OF PLASTICS FROM WASTE PRINTED CIRCUIT BOARD WITH RECOVERY OF HALOGEN AND METAL
- Material Recycling of Waste Plastics for Home Appliances
- Development of cobalt-free exhaust valve seat insert material for automotive engines
- Mesoscopic Material Design for Environmentally Benign Manufacturing and Materials Processing
- Suppression of Surface Hot Shortness of Steel due to Cu (+Sn) from Scrap without using Ni
- Is it reasonable to produce biodegradable plastics for a higher environmental friendliness during end of life?-an environmental comparison of incineration and land filling looking at GHG and sustainability-
- Ecomaterialization by Improvement of Materials Efficiency of Carbon and Glass Short-cut Fiber Reinforced Cement Composites (CFRC and GFRC)
- Compression Molding and Mechanical Properties of Green-Composite using Ramie/PLA Non-Twisted Commingled Yarn
- Nano-Composite Coatings by Supersonic Free-Jet PVD
- Solid State Recycling of 5083 Al Alloy by Hot Extrusion
- History of steel production in Japan and estimation of scrap generation in the future
- Material Flow of Chemical Elements used in Electronic and Electric Equipment
- Material Flow of Lead and Used Lead-acid Battery Recycling System in Japan
- Low-activation Concrete-using limestone aggregate
- Fabrication of Porous Titanium Dioxide Thin Films by Electrostatic Spray Deposition and Their Application to Dye-sensitized Solar Cells
- Development of segmented thermoelectric materials for high performance waste heat recovery and power generation devices
- Application of Conductive Polymers to Thermoelectric Materials
- A State of the Art and Development in Materials Process Design and Technology for Sustainable Society
- Material Flow Analysis of Metals in Japan
- Development of Insulation Material Using Natural Tree Bark
- Development of construction materials with low thermal conductivity from agricultural waste
- Properties of the Cementitious Composite Material Containing Charcoal Particle Reinforced with Natural Fibers
- LCA OF AN ULTRA-CLEAN MICRONIZED COAL SLURRY FUEL USED IN DIESEL ENGINES
- CONVERSION OF SLUDGE INTO NOVEL MATERIALS FOR CONSTRUCTION APPLICATIONS
- Evaluation Methods for Environmental Impact-A Case Study of Ecocement Production-
- Fabrication and Properties of Fullerene Nanowhiskers and Nanofibers
- In situ Observation of the Behavior of C60 (Nano)whiskers under Heating by TEM
- Nano structural features in rare earth doped CeO2 electrolytes for Solid Oxide Fuel Cells application
- Nanoscale Disequilibrium in Waste Form Apatites
- A removal process of phosphorus from waste water by using Calcium Sulfate
- Effect of Tourmaline Powder on the Photocatalysis of Nano-TiO2
- Environmentally Benign Catalysts for C-C Bond Forming Reactions
- BGA Joint Microstructure of Sn-Ag Based Solders with Au/Ni-P Plating
- Tensile Properties of Sn-0.7mass%Cu Lead-free Solder
- Effects of Composition on Microstructure and on Thermal Stability of Sn-Ag-In Lead-Free Soldered Joints
- Development of Flame Retardant for Halogen-free Build-up Insulating Resin
- Bio-based seedling pots manufactured from rice hulls and straw by employing the high-pressure steam approach
- Study on Improvement of Poly(L-lactic acid) by Blending of Poly(.EPSILON.-Caprolactone)
- A Technique for recovering Sodium phosphate from incinerated ash of sewage treatment sludge by Hydrothermal Synthesis
- Screening of wood preservatives and natural compounds against 2 isolates of Loweporus tephroporus from severely damaged ekki wooden bridges in Japan
- Production of the High Density and Strength Moldings from Wood Flour without Binder by the WIP (warm isostatic pressing) Technology
- Life Cycle Assessment of Eco-Cement
- Direct Coagulation Casting of Alumina Slurries Stabilized through Zirconium Acetate Using an Enzyme-Catalyzed Reaction
- Shaping of Alumina Body through an Eco-conscious Process-Direct Casting of Alumina Slurry by Hydrolysis of Aluminum Nitride-
- Direct Casting of Aqueous Alumina Slurries Using Increase of Ionic Strength by Addition of Yttria
- Synthesis of CaNiH3 based hydrides by mechanical alloying
- Tensile properties of novel polyarylate and aromatic polyamide resins
- Grain Refining and Mechanical Properties of Equal-Channel Angular Pressed Al-Ni eutectic Alloy
- Mechanical Properties of Functionally Graded Material Fabricated from Dilute Al-Cu Alloy
- MLCA for Production of Magnesium Diecastings
- Chain Entanglement of Polyester Film from Environmental Degradation
- Wear of soft fabric by magnetite green compact-How to evaluate the life time of bag-filter in dust collector-
- Synthesis of Calcium Titanate Films and the Recycle of the Raw Material by Hydrothermal Method
- Recycling of PET/PE Core/Sheath Fiber Wastes as Low Materials of Composites
- Fundamental Material Recycle of Unsaturated Polyester Resin
- PET Chemical Recycling
- Characterization of Photo-Yellowing Trigger Compounds Repressing Paper Recyclability
- Superplasticity for Solid-Recycled AZ31 Magnesium Alloy
- Fabrication and Properties of SiCpc Fiber Reinforced Nickel
- Recycling Process for the Resins Containing Brominated Flame Retardant
- Fabrication of Supported Palladium Membrane for Membrane Reformer
- Characteristics of Test Fuel Cell Using Hydrogen Storage Alloy
- Control of Luminescence Intensity from Eu3+-doped Polyimide Nanoparticles by UV-irradiation and Thermal Treatment
- Synthesis of the polythiophene series and evaluation of the thermoelectric properties
- Temperature Dependence of Hall Coefficient of La1-xSrxMnO3
- Mercury emissions and energy consumption in used fluorescent tube treatment
- Heavy Metal Free Polyester
- Liquid-Phase Synthesis of Precursor Particles of Eu-Doped Phosphor for Mercury-free Lamps
- Pb-Free Brass from Scrap by Compound-Separation Method
- Production of Ultra Fine Lead-Free Solder Powders by A New Atomization Technology
- A Technique for Recovering Phosphorus Salt from Incinerated Ash of Sewage Treatment Sludge
- Pb2+-Uptake Property of Octacalcium Phosphate Cement in Solution
- Heavy metal recovery from contaminated soil
- Hazardous Waste Fixation by Synthesis of Sodalite from Kaolinite
- Reproduction of a new high temperature HCl sorbent, Sodalite (Na8Al6Si6O24Cl2) and chlorinate mayenite (Ca12Al10Si4O32Cl6)-The removal of Cl ion occluded in nano space of zeolite structure-
- Development of Deodorant Panel
- Promoted Ir/SiO2 Catalysts for the Selective Reduction of NO in the Presence of O2 and SO2
- Immobilization of Simulated High Level Nuclear Wastes with Magnesium Phosphate Glasses
- ZSM-12 zeolite catalyzed shape-selective ethylation of biphenyl to 4,4'-diethylbiphenyl
- Nanoporous Glass by Pseudomorphic Transformation of Zeolite
- Synthesis of aluminophosphate-type molecular sieve MgAPO-36 (ATS) by dry-gel conversion (DGC) method and its application of shape-selective catalysis
- Zeolite Beta by Dry Gel Conversion (DGC) Method: An Efficient Catalyst for the Isomerization of Hexane
- Synthesis and Characterization of alkaline earth metal substituted aluminophosphates with AFI topology
- Characteristics of titanium oxide filled polymer film with crazes
- Rare-earth Metal Triflates. An Environment Conscious Catalyst for the chloromethylation of Aromatic Hydrocarbons
- Palladium Complexes Immobilized on FSM-16 as Catalysts for Heck Reaction
- Clean syntheses of phenoquinones and diphenoquinones from phenols catalyzed by alkali-modified M-Mg-Al hydrotalcites (M=Cu, Fe, Ru, Ni, V, and Pd) in the presence of molecular oxygen
- Properties of SiC/SiC Composites with Surface Modified SiC Fiber
- Environmentally Friendly P/M Parts and Process for Automotive Applications
- Ecomaterials toward Sustainable Society
- The Intercalation of Some Metal Ammine Complexes into Ti layered Oxides by Electrostatic Self-assemble Deposition (ESD) Technique
- Solvothermal Synthesis Route to One-Dimensional Nanostrucutes
- Novel Sol-Gel Technique for Preparing Single-Phase Complex Oxide Thin Films from Aqueous Solutions of Metal Salts
- SiO2-TiO2 graded bulk glass prepared by sol-gel method and centrifugal processing
- Niobate Ceramics from Chemical Precursors at T < 800.DEG.C.
- Rational Design of Low-dimensional Nanomaterials: Novel Soft Solution Approaches
- Silicate-Mediated Film Formation of Alkaline-Earth Metal Carbonates
- Electrical Characterization of Electrodeposited p-type Semiconducting Cu2O Films
- Alumina Coating on Stainless Steel Wire Net by Electrophoretic Deposition and its Oxidation Resistance
- PVP-Assisted Sol-Gel Preparation of BaBi4Ti4O15 Thin Films and Dielectric Properties
- Synthesis of New Li-Mn Oxide (Li3Mn2O5)
- Preparation of Concentrated Aqueous PZT Suspension for Wet Processing Methods
- Apatite Formation on Hydrochloric Acid Treated Titania Thin Film Synthesized from Aqueous Solution
- Characterization of "Stalactite" Hanging from Old Concrete Bridge
- Reaction Pathway Analysis of 1-Hexyl Alcohol in Water at Hydrothermal and Supercritical Conditions
- In-Situ Crystallization of Zeolite Films on Ceramic Honeycomb Substrates from Metakaolinite Precursors
- Solvothermal Synthesis of Visible-light Reactive Titania Nanocrystals
- Investigations on pore structures and surface functional groups of activated carbon fabricated by microwave irradiation
- Low temperature synthesis of Sr and Ba M-type ferrites by polymerized complex method
- Environmental Purification Materials: Removal of Ammonium and Phosphate Ions in Water System
- Formation of cerium oxide thin films from aqueous solution
- Electrical and thermal properties of dense Ce1-xRExO2-.DELTA. electrolyte using low-temperature sinterable powder (0.LEQ.x.LEQ.0.2, RE=Y, Sm, Gd)
- Clean Synthesis of Low-Temperature Air-Sinterable Lanthanum Calcium Chromite Powders by the Citrate Method without using Nitrates
- Cryochemical Synthesis of Zinc-salt Nanoparticles
- Preparation of Titania-Zeolite Composite Thin Film Using Dip-Coating and Hydrothermal Treatment
- Synthesis of New Adsorbent as Metal Ion Capture Material
- Selenate ion Reduction on Titanium oxide Electrode Synthesized by Eletrooxidation of Titanium Metal.
- Microbial Preparation of Gold Nanoparticles by Anaerobic Bacterium
- Preparation of Ag/.GAMMA.-Al2O3 Nanocomposite by Solvothermal Process
- Photochemical Properties of Titania Nanocrystals Prepared by Hydrothermal Process in Urea Solution
- Zinc Oxide: Soft Hydrothermal Synthesis and Luminescent Characteristics.
- Soft Solution Processing of Lithium Vanadium Oxide Nanorods as Cathode Materials for Rechargeable Lithium Ion Batteries
- Mechanism and Morphological Change in Zeolite Formation from Coal Fly Ash
- Nanohybrids from Ion Exchange and Hydrothermal Reaction
- Decomposition of chlorinated organic compounds to diamond structured carbon at moderate hydrothermal conditions
- Preparation of Hydroxyaptite Material Using Apatite Hydrogel
- Interaction between Nanometer-sized Hydroxyapatite Particles and Amino Acid
- Deposition of Titanium-Vanadium Oxide Films on Organic Self-Assembled Monolayers
- Shape and size control of inorganic nanoparticles using microemulsion method
- Deposition of Thin Films of Aluminum Oxide-H2O System from Aqueous Solutions at Room Temperature
- 27Al MAS-NMR Study of Nanoporous Alumina
- Colloid Chemistry of Layered Perovskite Niobate
- Synthesis and Photocatalytic Properties of Ion-Exchangeable Perovskites
- PHOTOCATALYTIC DEGRADATION OF NITROARENES USING ACTIVATED CARBON/TiO2 PHOTOCATALYST
- Changes in Surface Temperature of Woodceramics Manufactured by Pine Thinning Logs (I)-Effects of Resin Impregnation Rate and Burning Temperature-
- Morph-Genetic Materials Derived from Plants
- Application of Woodceramics for Ammonia Sensor
- Research of a Snow-Melting System for Houses that Uses Porous Carbon-Material Woodceramics
- Characterization of woodceramics derived from olive pomace
- Preservation of Aged Wood Structures by the Determination of Strength Properties of In-Place Lumbers by a Non-Destructive Test Method
- Development of Electromagnetic Wave Absorber with White Charcoal
- Fabricaiton of binderless boards from wood shavings by compressively molding with high-pressure steam
- Biological Activities of Polyphenol Compounds Derived from Unripe Apple
- Feasibility of Tree Selection for High Pulp Yield, Brightness and Recyclable Paper Production
- Repetition Property of Chemical Compound Adsorption by Charcoal Board Adhered with Superfine Natural Fibers
- Characteristics if Compressed Wood and its Application
- Application for the cosmetics material of Hinokitiol-Zinc Stearate Complex and Aomori Hiba neutral oil
- Synthesis of Lignophenol-Based Network Polymer with Hydrogel Property
- Effect of Degree of Interfacial Chemical Bonds on Tensile Strength of Cellulose/Polypropylene Composites
- Static Defense Components for Sugi Butt-rot Disease
- Non-combustibility of Charcoal Board Covered with Low Softening Point Glass
- Full-field Measurement of Deformation of a Mortise and Tenon Joint in Traditional Wooden Structures
- Connecting Sliced Veneers of Japanese Cedar (Sugi) by Hot-pressing and Development of Deep Wood Tray without Adhesive
- Variation in Moisture Content of Sugi Boxed Heart Timber during Kiln Drying under High Temperature and Low Humidity
- Relationship between the Piezoelectric Phenomenon and the Mechanical Behavior under Combined Compression and Vibration Stresses
- Static Bending Strength Performances of Wood-Aluminum Hybrid Laminated Material
- Applications of Recycled Materials to Fuel Cell and Related Technologies
- Crystalline Control of Bincho Charcoal by using Catalytic Graphitization and Electromagnetic Wave Absorption Characteristics of Derived Carbon
- Evaluation of Waterproof Property of Woodceramics
- Raman spectroscopy of wood-based C-C composite materials (woodceramics)
- Tribological Properties of Woodceramics under Lubricated Sliding Contacts using Mineral Oil, Vegetable Oil and Water
- Evaluation of surface grinding of the Woodceramics using by the 3-D Measurement
- Analysis of compressively deformed poplar wood treated with PF resin by ESCA and FTIR
- Effects of Density on Electrical Characteristics of Woodceramics as Far Infrared Heater
6 - Synthesis and Properties of Novel Sulfonated Polyimides for Fuel Cell Application
- GaN Epitaxial Growth on Sapphire Substrates by NH3 Source Molecular Beam Epitaxy
- Fabrication of Thin YIG Ferrite Platelet Using SPS method
- Thermoelectric Properties and Electronic Structure of Mg2Si System
- High Resolution TEM Study of Li2NiMn3O8 and Li2MnNiO4 for Advanced Lithium Batteries
- Separation Organics/Water Mixtures by Pervaporation with Silicalite Membranes
- Synthesis of Zeolite Beta Membrane and its Pervaporation Properties
- CO2 Removal by Branched Polyether Membranes
- Rechargeable Lithium Polymer Battery
- Novel Proton Conducting Polyimides from Sulfonated Sulfonyl-Containing Diamine Monomer
- Growth Process of GaN Layer on ZrB2 Substrate by Gas Source Molecular Beam Epitaxy
- Thermal Stability and Decomposition Products of Mg-exchanged Na-LTA Zeolite for Heat Pump Use
- Transport phenomena through zeolite NaA and T-type membranes
- Preparation of Anatase Film by the Solution Process
- Permselectivity of Anions through Gel Membranes Prepared from N-isopropylacrylamide and Poly(vinyl alcohol)
- CO2 selective membranes Prepared from Hyper-branched Graft Polymers by Atom Transfer Radical Polymerization
- Preparation and Characterization of Temperature-responsive Gel Actuators by in situ Polymerization of N-isopropylacrylamide and Poly (vinyl alcohol)
- Synthesis and Characterization of a Hyper-branched Graft Polymer for Solid Polymer Electrolytes
- Characterization of Polyelectrolyte Complex Films Composed of Cys-PEOMA and Chitosan as a Drug Carrier
- Preparation and characterization of modified polyvinylalcohol-hydroxyapatite composites
- Transparent Hydroxyapatite and .BETA.-Tricalcium Phosphate Ceramics Prepared by Spark Plasma Sintering Daisuke
- Analysis of Inorganic Substance Deposited In vivo
- Preparation and Stimuli-Sensitive Characterization of Polyelectrolyte Complex Films Derived from Chitosan and Polyalkyleneoxide-Maleic Acid Copolymer
- Chemical Modification of Anion-Exchange Resin with Chrome Azurol S
- Surface-Resistance-Type Humidity Sensor Based on Sulfonated Polyimide
- Collection of Trace Ions by Use of Conducting Polymer Colloid
- Theoretical Study on Mechanism of Asymmetric Anionic Polymerization of N-Substituted Maleimide by using a Zn Complex with a Chiral Bisoxazoline ligand
- Inner Surface Modification of a Polymer Bottle by Plasma-Based Ion Implantation
- Construction and characterization of solid-state ion flux controller
- A Novel Fabrication Technique of Porous Hydroxyapatite Ceramics
- Biocompatibility of Hydroxyapatite Films Formed on Various Metals by a Surface Treatment Using an Enzyme Reaction
- Transport Properties of Ions through pH Memorizable Charged Membranes Prepared from Poly (vinyl alcohol)
- In vitro Platelet Adhesion and Protein Adsorption of Biomedical Implant Modified with Polysaccharide
- Novel Techniques of Hydroxyapatite Coating on Titanium Utilizing Hydrothermal Hot-pressing
- Simulations of Permselectivity of Ions with Different Valence through a Charged Membrane
- SBF evaluation of bioactivity of polarized ceramic apatite solid solutions
- Change in the Concentration of Dissolved Oxygen in the Suspensions of Anatase and Rutile TiO2 Powders under UV Irradiation and Their Photoluminescence Properties
- Photo-oxidation Property of Nitrogen and Fluorine Co-doped SrTiO3 Made by Mechanochemical Method
- Effect of Noble Metal Nanoparticles on Photocatalytic Activity of TiO2
- Preparation of Highly Oriented TiO2/ZnO Films by Pulsed Laser Deposition
- Theoretical Investigation of the Photocatalysis Processes for Several Chlorinous Organic Compounds on the Anatase TiO2 Surface using an Accelerated Quantum Chemical Molecular Dynamics Method
- Photocatalytic Activity of TiO2 Thin Films Prepared by the Sol-Gel Method: Primary Particle Size as a Predominant Factor
- Air Purification Using Titanium Functionally Graded Materials Produced by Progressive Lamination Method
- Doped nanoparticles for photocatalytically active surfaces
- Enhanced Thermoelectric Performance of ZnO-based Oxide Materials
- Thermoelectric properties of Ni-based oxides
- Successive Magnetic Transitions in Thermoelectric Layered Cobaltite, [Ca2CoO3]0.62[CoO2]
- Magnetic Field Effects on Thermoelectric Properties of [(Bi,Pb)2Sr2O4]yCoO2 Single Crystals
- Magnetism in Na0.75CoO2 Investigated by .MU.SR
- Thermoelectric Misfit-Layered Cobalt Oxides (I): Oxygen Nonstoichiometry and Cobalt Valence
- Thermoelectric Misfit-Layered Cobalt Oxides (II): Properties of Oxygen-Controlled Samples of Ca3Co3.95O9+.DELTA.
- Physics in the hexagonal CoO2 block in NaCo2O4
- Theory of The Nonparabolic Effects of The Thermoelectric Properties
- Thermoelectric property of ladder-type oxide
- High Temperature Thermoelectric Properties of the One-Dimensional Ca3Co2O6 Compound
- Thermoelectric properties of (R, Sr)CoO3 (R=La, Pr, Nd, Sm)
- Thermoelectric Properties of Hot-Pressed GaN and InN
- Transport properties of undoped and Sb-doped haif-Heusler compounds NbCoSn
- Thermoelectric properties of Bi-Te based materials prepared by bulk mechanical alloying and shear extrusion
- Thermoelectric Properties of Ba8PdxGe46-x Clathrate Compounds
- Thermoelectric Properties of AlPdRe Quasicrystalline Thin Films
- The study for the annealing effects on the Si and Ge amorphous thin film by using photoacoustic spectroscopy
- Thermoelectric Properties of MnSi-1.73 Produced by Cold Pressing and Sintering
- Crystal structure, electric and magnetic properties in NaxCoO2
- Thermoelectric Properties of Y2Mo2O7-based Pyrochiore Solid Solutions
- Negative Thermopower Induced by Entropy Backflow
- Thermoelectric properties of Ca-doped .GAMMA.-NaxCoO2
- Thermoelectric Properties of Several Strontium Ferrites, SrFe12O19, SrFeO3-x and Sr4Fe6O13+x
- Synthesis and Thermoelectric Properties of Doped NaCo2O4 with Transition Metal Cations
- Characterization of post-annealed CoSb3 grown by vertical Bridgman method
- Effect of Filling Fraction on Thermoelectric Properties of YbyFe4-xNixSb12 Compounds
- Thermoelectric Properties of n-type Ni-doped CoSb3 Semiconductors
- Thermoelectric Power of Kondo Insulators and Kelvin's Relations at Low Temperatures
- Magnetic Field Effect for Thermoelectric Conversion: A Proposal for Nernst-Seebeck Element
- Improved intracellular uptake of self-targeting nanoparticles to cancer cells by combination of non-specific and receptor mediated endocytosis
- Bone Formation by Cryopreserved Human Bone Marrow-derived Mesenchymal Stem Cells In Vitro-Preliminary results using human marrow cells from two cases-
- Effects of Bioconjugation with Novel Phospholipid Polymers on Enzymatic Activity and Stability
- Development of the Tendon Chitosan Tube and its Application to Nerve Conduit
- Physicochemical Properties and Bio-degradation of Segmented Polyurethane and Poly(urethane-urea) Derived from Lysine-Based Diisocyanate
- Colloidal Chitosan Nanospheres
- Nano-Hydroxyapatite/Collagen/PLA bone scaffold reinforced by chitosan fibres
- Bioactivated Nano-Space in the Vicinity of Polarized Hydroxyapatite Surface in SBF
- Hydroxyapatite Formation on CaSiO3 Ceramics in Simulated Body Fluid
- Collagen immobilized PVA hydrogel-hydroxyapatite composites for keratoprosthesis
- Novel Hydrogels of Malic Acid and Zinc; Their Synthesis and Characterization
- Concept of Functionally Graded Apatites and Their Application to Biomaterials
- Preparation of Hydroxyapatite/Chondroitin Sulfate Nanocomposite and its Spherical Porous Microparticle
- Role of Electron Beam Irradiation-Induced Surface Nanostructure Changes on the Multi-functional Properties of Ceramics
- Construction of Interconnected Pore Network Using Hydroxyapatite Small Components
- Control of Bioresorption of Porous .ALPHA.-Tricalcium Phosphate by Coating with Silk Sericin
- Development of Bioactive Paste with Improved Handling
- GD-OES Analysis of the Interface between Titanium and Hydroxyapatite Ceramics Produced by Hydrothermal Hot-pressing Method
- Surface Modification of Bioactive Calcium Pyrophosphate Glass-Ceramics
- Osteoconductive Mechanism of Electrically Poled Hydroxyapatite Ceramics
- Bone Regeneration with Organic/Inorganic Composite Materials
7 - Overview of Japanese Smart Materials and Structures System Project
- Recent development of Smart Materials
- Development of a Smart Materials Actuated Fuel Injector for Automobile Engines
- Shape Memory Properties and Related Transformation Behavior in a Pre-deformed Sample at Room Temperature in Fe-15Mn-5Si-9Cr-5Ni-0.5NbC alloy
- Effect of Re Addition on Martensitic Transformation Behavior of Ni-Al Alloys
- Evaluation of Nucleation and Propagation Behavior of Phase Transformation on Shape Memory Alloy Plate
- High Temperature Shape Memory Effects in Ternary Ti-Ni-X (X=Pd,Zr) Thin Films
- Transformation Characteristics of Sputter Deposited SMA Thin Film
- Joule Heat Induced Shape Memory Behavior of Ti-Ni Shape Memory Alloy Thin Films
- Effect of Heat Treatments on Microstructures and Shape Memory Effect in TiNi Foils Produced from Ultrafine Laminates
- Some considerations on TiNi-based thin films for MEMS applications
- Characteristics and Application of Ti-Ni Leaf-Spring Actuator
- Site Preference of The Third Element in TiNi
- Transformation behavior of Ti-Ni-Pt high temperature shape memory alloys
- Mechanical and Shape Memory Properties of Ti-Sc-Mo Biomedical Alloys
- Microstructural Characterization and Shape Memory Effects of Ti-Nb-Al Alloys
- Shape Memory Characteristics of Ti-Nb-Ge Alloy
- Electronic Structures of Ferromagnetic Shape Memory Alloys with Martensitic 14M Phase
- Composition dependence of structure in Au52.5-x-Cd47.5-Agx shape memory alloys
- Effects of Composition and Structure on Mechanical Properties of Polycrystalline Ni2MnGa Alloy
- Relation between Composition and Shape Memory Effect of the Sputtered Films of Ferromagnetic Shape Memory Alloy Ni2MnGa
- Design of Smart Composites Based on Polymer and Shape Memory Alloy Powders
- Progress on Processing and Design of Composites with Embedded Shape Memory Alloy Wires.
- CORROSION BEHAVIOR OF Ti-Ni-Cu SHAPE MEMORY ALLOYS FOR HEAT ENGINE ACTUATOR IN SIMULATED GEOTHERMAL WATERS
- Fatigue Properties of Highelastic Thin Wire and Superelastic Thin Tube of NiTi Alloy
- Rearrangement of Martensite Variants of Fe-31.2at.%Pd under Magnetic Field
- Influence of Magnetic Field Direction on Recoverable Strain Due to Rearrangement of Variants in Fe3Pt
- Magnetic shear stress for the rearrangement of martensite variants in stoichiometric Ni2MnGa
- Development of High-temperature Shape Memory Alloys in the Ni2+xMn1-xGa System
- Self-Crack-Healing under Cyclic Stress of Silicon Nitride Composite
- Fatigue Strength of Crack-Healed Al2O3/SiCw at elevated temperature
- Critical Crack Healing Condition under Stress and Subsequent Strength at the Healing Temperature
- Fabrication of metallic closed cellular materials by sintering of metal coated heat resisting particles
- Structures of Tetra-needle Like ZnO Whisker During the Crystal Growth
- Metal-carbon nanocomposite films for temperature sensing with enhanced functionality
- Cellular/Dendritic Transition in Directional Solidification of Tb0.27Dy0.73Fe1.95 Alloy
- Formation of Self-Orientated Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation
- Influence of Grain Boundary on Magnetoresistance in La0.7Ca0.3MnO3
- .GAMMA.'-Fe4N Thin Films with Out-of-plane Magnetization
- Colossal magnetoresistance (CMR) effect in (Fe,Cu)Cr2S4
- Functional, Nanostructured Materials via the Polymerization of Liquid Crystal Assemblies
- Organic Intercalation with Layered Polymer Crystals Consisting of Diisotactic and Disyndiotactic Polymer Chains
- Photo-Thermal Effects of Some Cholesterol-Azobenzene Containing Dimesogens
- Control of the lower critical solution temperature of poly(acrylamide) with azobenzene units
- The Construction of Polymeric [2*2] Metal Grids utilizing Supramolecular Initiators
- Supramolecular Engineering with Macromolecules: Preparation of Block Copolymers and Nanomaterials
- Two-dimensional manipulation of .PI.-conjugated polymer by means of instant mass migration
- Ligand-Printed Ion Pore Composed of Polypeptide Assembly in a Lipid Bilayer Membrane
- Preparation of the novel sensing system using structural color plate
- Visual Sensing System from Polypeptide Nano-Assembly
- Characterization of Organized Molecular Layers Including Amphiphilic Isothiouronium Derivatives
- Odd-Even Effects of Multilayers in Azobenzene-Containing Urea Amphiphiles
- Concentration-Dependent Structural Transition of Supramolecular Thiacyanine J-Aggregates in Solution
- Nonlinear Optical Susceptibility of Tetra-tert-butyl-Vanadyl-phthalocyanine Films Laminated by Langmuir-Blodgett Method
- Optical Properties of J-aggregates in Vapor Deposited Films of a Bisazomethine Dye
- Ferroelectric Langmuir-Blodgett multilayers incorporating metallic cations
- Preparation of Mesoporous Silica Films Filled with Various Amino Acids and Peptides in Their Nanopores
- Immobilization of One-Dimensional Charge-Transfer Assemblies in Mesoporous Silica Films through Discotic Molecule Templating
- Asymmetric Photoreaction in Peptide Assemblies Confined in Mesoporous Silica Nanopores
- Soft templating of metallic and metal oxide porous sponges using sacrificial dextran-based composites
- Preparation of Metal/Metal Oxide Network Using Organic Polymer Gel
- Phthalocyanine-Gold Particle Nanostructured Assemblies for Near-IR Photoelectric Conversion
- PREPARATION OF ORGANIC-INORGANIC NANOHYBRIDS BY USING SELF-ASSEMBLY REACTION OF AMORPHOUS METAL HYDROXIDES WITH ORGANIC COMPOUNDS.
- Preparation and Intercalation reactions Of Zn-Sn LDH and Zn-Al-Sn LDH
- Complexation of Dendrimer-protected Silver Nanoparticles with Hydrotalcite
- Intercalation of Cu2+ with 3-(Aminopropyl) triethoxysilane into Montmorillonite
- Control of photochemical dimerization of acenaphthylene in graphite oxides intercalated by n-alkylamines with different alkyl chain lengths
- Adsorption of Cationic Surfactants on Hydrogen-Terminated Si(111) Surfaces Studied by In-situ Atomic Force Microscopy
- Quenching Effects and Conduction Characteristics of Al doped ZnO ceramics
- Inorganic membranes for harsh conditions-viewpoints on materials issues
- Development of ceramic support substrates for hydrogen separation membrane applications
- Preparation of thin zeolite films on porous titania-stainless steel composite substrates
- Transport Properties of Condensable Gases through Microporous Silica Membranes
- Hydrogen Permeation Characteristics of Melt-Spun Amorphous Alloy Membranes
- Preparation and Characterization of SiC membranes for High Temperature Hydrogen Separation
- Catalytic membrane reactors for methane reforming using hydrogen permselective silica membranes
- Microporous Silica Membrane prepared using TMOS/O3 CVD in Opposing Reactants Geometry
- Stability of Ni-doped Silica Membranes for H2 Separation at High Temperature
- Microporous inorganic membranes for CO2 separation
- Gas Permeation Properties of Iron Containing Carbon Molecular Sieve Membranes
- Development of a Design Tool for Gas Separation Membrane Modules using Computational Fluid Dynamics Simulation
- Effect of Molecular Interactions on Gas Permeation Properties through a Microporous Silica Membrane Studied with Molecular Dynamics Simulation
- A Novel Method for Preparation of SrFeCo0.5Ox Membranes on Porous Substrates for Oxygen Permeation
- Methanol Permeation Properties of Sulfonated Polyimide Membranes
- Pervaporation Properties for an Azeotrope of Ethanol/Water through Organic-Inorganic Hybrid Membranes from Quaternized Chitosan with Tetraethoxysilane
- Gas and Vapor Permeation through Liquid Membrane Using Ionic Liquid
- Effect of Ultrasound on Membrane Cleaning Processes for Enhancement of its Permeability
- A photocatalytic membrane reactor for liquid-phase reactions using porous titanium oxide membranes
- Molecularly Imprinted Nylon Membranes Having Amino Acid Selective Binding Properties. Effect of Phase Inversion Condition on Membrane Characteristics
- Preparation and Characterization of Polymer-Mica Composite Cation-Exchange Membranes
- Effect of Thin Fluoro-ionomer Coating by Plasma Polymerization on Methanol Crossover and Proton Conductivity of Membrane for Direct Methanol Fuel Cell
- Ion-Pairing Effects in Charged Membranes with Low Water Contents
8 - Development of Bioactive Paste with Improved Handling
- Effects of Mono-, Oligo- and Polysaccharides on Fibrin Gelation
- Direct Observation of Hydride Formed in Pure Titanium by Refraction-Enhanced X-ray Imaging Method
- Characteristics of Nb/AlOx-Al/Nb Josephson Junctions Fabricated using Facing Target Sputtering
- Influences of microstructure on the gas sensing properties of ZnO/SnO2 thin films
- Characteristics of LaGaO3 Based Perovskite Films Prepared by Pulsed Laser Deposition
- Dependence of Structure on the Oxygen Gas Flow Rate in Reactive Gas-Flow-Sputtering of TiO2 Films
- CARBON ARC DISCHARGE: PLASMA EMISSION SPECTROSCOPY AND CARBON NANOSTRUCTURE FORMATION
- State of the Art of Research on Mechanochemical Processing and Mechanical Alloying in Korea
- Fabrication of Crystalline-Oriented TiO2 by Electrophoretic Deposition in a Strong Magnetic Field
- Control of Microstructure in Textured Alumina Based Ceramics Prepared by Colloidal Processing in a High Magnetic Field
- Deposition and Orientation of Titania Particles in an Electrical and Magnetic Field
- Fabrication of Oriented .BETA.-Alumina from Porous Bodies by Slip Casting in a High Magnetic Field
- Structural Control of Fe-Based Alloys through Phase Transformations in High Magnetic Field
- Formation of Helical Structure in Silicate under Gradient Magnetic Fields
- Influence of Water Adsorption on Electrochemical Performance of Plasma Modified MCMB Powders
- Gas-phase Chemical Reaction of Laser Ablated Copper Atom with Carbon Tetrafluoride in Electric Field: Plasma Switching by Laser Ablation (PLASLA)
- Time-Dependent Two-Dimensional Chemical Non-Equilibrium Modeling of Ar-N2 Pulse-Modulated Induction Thermal Plasma at Atmospheric Pressure for Material Processing
- Nucleation Mechanism of Boride Nanoparticles in Induction Thermal Plasmas
- Preparation of carbon related thin films using atmospheric non-thermal plasma jet
- Titanium Dioxide Nano-Particles through Thermal Plasma Oxidation of Titanium Nitride Powders
- Disintegration of Nb-Zr-Fe alloy in hydrogen atmosphere (0.1MPa, 300K)
- Comparative Study of TiO2 Anatase Epitaxial and Polycrystalline Thin Films Grown by Magnetron Sputtering
- Preparation of Nanocrystalline Diamond in a Low Pressure Inductively Coupled Plasma
- Effects of electric field on the nuclei-growth processes of hydroxyapatite for bioaffinitive nanocomposites
- Pb(Zr,Ti)O3 Thin Films Grown on Seeding Layer with Electric Field-Assisted Annealing
- In situ Fourier Transform Infrared Spectroscopy of Oxygen Species on Pt/YSZ Electrodes at High Temperature
- Engineering of Noble Metals-Zirconia Nano-Composites
- Ultrasonically Homogenized Precipitation for the Preparation of Functional Ceramic Powders
- Formation of Graded Structure in Se-Te Solid Solution prepared by an Ultra-Strong Gravitational Field
- Catalytic Nature of MoS2 Fine Particles Prepared by Mechanical Milling for Hydrotreatment of Petroleum Fuel Oil
- Mechanical Properties and Thermal Shock Resistance of Hot-pressed High-speed Steel
- Thermal Expansion of the Mullite Fiber/High-speed Steel Composite
- Microstructural Aspect of Deformability of High Strength Linepipe Steels
- Design of Nanosized TiC Precipitates for Trapping Detrimental Hydrogen in High Strength Steels
- Microbiologically Influenced Corrosion in Seawater and Corrosion Resistance of High Nitrogen Stainless Steel
- Microstructure and Mechanical Properties of High Purity Copper and Copper Alloys Heavily Deformed by Equal-Channel Angular Pressing
- Improvement in Creep Strength and Impact Toughness of Advanced Creep Resistant Steel Based on Ferrite Matrix
- Nano-Crystallization of Steel Powders with Mechanical Milling Treatment
- Application of SPD/PM Process to Produce a TiC/Ti5Si3 Nano Grained Composite
- Fine Grained Carbon Steel via Mechanical Alloying and Hot Pressing
- Structural Stability of AA3003 with Ultra-fine Grain Size by Accumulative Roll Bonding Process
- Misorientation change during annealing of Al heavily deformed by accumulative roll-bonding (ARB)
- Microstructural Changes of Particle Containing AA8011 Alloy Sheets During Accumulative Roll Bonding (ARB) Process
- Development of Carbon Steels with High Strength and Ductility by Repetitive Side Extrusion and Heat Treatment
- A comparison of microstructural refinement of Al by three different severe plastic deformation techniques
- Nanocrystallization in Steels by Air Blast Shot Peening
- Fabrication of Ultrafine Grained Steels without Severe or Heavy Plastic Deformation
- Characteristic Microstructure Features Influencing the Mechanical Behavior of the Warm-Rolled Ultrafine Low-Carbon Steel
- In-Situ Formation of Reinforcements in Reactive Sintered Aluminum Matrix Composites
- Interfacial Microstructures and Bonding Characteristics of ODS-Ag/Cu Alloy Electric Contact Materials
- The dissolution behavior of additive base metal powder in the wide gap TLP bonded interlayer
- Preparation of SiC Matrix Laminated Ceramic Composites by Electrophoretic Deposition
- Microstructure and Mechanical Properties of Nickel-Particle-Dispersed Zirconia Composites
- TEM analysis on the grain boundaries of SiC compacts sintered by spark plasma sintering method
- Critical Crack Speed and Fractoemission in Brittle Materials
- Effect of substrate and catalyst on formation of aligned Carbon nanotubes by CVD technique
- Improved Oxidation Resistance of C/C Composites by a Compositionally Graded TiC/SiC/C Interlayer
- Structure and Properties of Ti-Cu-N Films Prepared by ICP Assisted Magnetron Sputtering
- Analysis of the Deformation Behavior in Nanocrystalline Y2O3 Stabilized Tetragonal ZrO2
- Microstructure of Tyranno ZMI fiber Reinforced Carbon Matrix Composites after Partial Oxidation at Different Temperatures
- Multiscale Simulations of Fracture in Silicon
- Large-scale electronic structure calculation and its application
- Crack Growth Mechanism in Iron under Cyclic Loading
- Activation Energy for Double-Kink Formation on a Dislocation Line Estimated in a Finite Temperature 3D Crystal
- Void Growth Simulations in Ni Crystal by using Molecular Dynamics and FEM
- Molecular Dynamics Study on Nano Structure and Shape-memory Property of Ni-Ti Alloy
- Field Theoretical Multiscale Polycrystal Plasticity
- Point defect energetics in silicon using the LDA+U method
- Mechanism of Impurity Diffusion in Silicon with a Point Defect: Tight-Binding Molecular Dynamics Simulation
- Hydrogen Diffusion in Si: A Tight-Binding Molecular Dynamics Study
- Investigation of the Nitrogen Effect on the Carbon Nanotube Growth by Ab-initio Calculation
- Size Dependence of the Effective Potentials and the Effective Magnetic Moments of Transition Metal Clusters
- Electronic Structure of Noble-Metal-Doped Clathrates with Nanostructure Si-Network
- Electronic structure, and thermoelectronic properties of the clathrates Ba8Ga16Si30 and Ba8Ga16Ge30
- Structure, Electronic Structure and Properties of Silicides Compound Systems
- Order-N Algorithm for Linear Response Function
- Tight-binding Approach to Electron Transport in Nanostructured Semiconductors
- Parallel TBMD and Hybrid MD/TBMD Simulations of Nanostructured Materials
- Dynamic Properties of Disordered Phases of Carbon
- An efficient hybrid molecular dynamics simulation method for solids
- Time-Dependent Density-Functional Calculations of Field Emissions from Carbon Allotropes
- Tight-Binding Calculation of Electrical Properties of a Single Molecule Connected to a Few Semi-Infinite Electrodes
- Ab Initio Evaluation of Capacitance Between Electrodes with a Nanoscale Gap
- ABSOLUTE VALUE OF GW QUASIPARTICLE ENERGIES OF A METHANE USING AN ALL-ELECTRON MIXED-BASIS APPROACH
- Study of Excited State in Quantum Antiferromagnets by Computational Reproduction of Magnetic Raman Spectra
- Molecular Design of a Novel Ring Polyimide with Nanoscale Cavity Using DFT Calculations
- First-Principles Calculation of 4fn-4fn-15d1 Transitions of Rare-Earth Ions in LiYF4 and LiYbF4
- An ab initio Study of Si3N4 Single Crystal Polymorphs
- Band Structure Analysis of the Insulating Phase of Sulphospinel Compound CuIr2S4 with the Density-Functional Theory
- Electronic Structures of the TTTA Molecular Crystal
- Dielectric Function of (CdSe)13 Clusters
- Dynamics on Electronic Excitation in Chemical Reaction
- Effect of Metal Oxide Supports on Catalytic Performance of Supported Ultrafine Metal Catalysts: Density Functional and Tight-Binding Quantum Chemical Study
- Tight-Binding Quantum Chemical Molecular Dynamics Study of the Propylene Polymerization by Ziegler-Natta catalyst
- Chemical Reaction Dynamics of Dioxin Decomposition by Tight-Binding Quantum Chemical Molecular Dynamics Method
- Tight-Binding Quantum Chemical Study of Oxygen Adsorption and Dissociation on Strontium-Doped Lanthanum Manganites
- Tight-Binding Quantum Chemical Molecular Dynamics Study of CO Adsorption on Pt(111) Surface
- Computational Chemistry Study on Palladium Hydrido-complexes and on Their Roles in Reactions Catalyzed by Palladium Complexes
- Mechanism of two-dimensional superstructure formation of self-assembled adenine molecules
- Sorption and Diffusion in Nanoscale Molecular Cavity in Polymer Crystals Studied by Molecular Dynamics Simulation
- Monte Carlo Simulations of a Semi-Flexible Polymer Solution
- Atomistic simulation on the time development of coarse-grained structure of inorganic material
- Atomistic structures of amorphous Si1-xGex alloys: A molecular-dynamics study
- Computer Simulation of Phase Decomposition in Fe-Cr-Co Alloy Based on the Phase-Field Method
- Phase-field Modeling for Faceted Dendrite Growth of Silicon
- Monte Carlo Simulations in New Generalized Isobaric-Isothermal Ensemble
- Mapping of Short-Range Interatomic Potentials onto Lattice-Gas Models: Potential Renormalization Theory
- Temperature-Dependent Mechanical Behaviors of High Damping Rubber Material and its Modeling
- Two-dimensional molecular dynamics simulation of the nano-void influence on the elastic modulus of metals
- Lattice Anomalies of MBC (M=H, Li, Na) Under Anisotropic Compression
- Lattice vibrations and their influence on impurity ion energy levels in laser crystals
- An Investigation of Temperature Dependence of Thermal Conductivity of Isotope Silicon
- Role of hydrogen in heat conduction in zirconium hydride
- An Internet platform of composites design and thermophysical properties evaluation
|